From: Michael Walle <michael@walle.cc>
To: qemu-devel@nongnu.org
Cc: Michael Walle <michael@walle.cc>
Subject: [Qemu-devel] [PULL v2 08/11] target-lm32: add breakpoint/watchpoint support
Date: Mon, 14 Oct 2013 18:29:32 +0200 [thread overview]
Message-ID: <1381768175-13520-9-git-send-email-michael@walle.cc> (raw)
In-Reply-To: <1381768175-13520-1-git-send-email-michael@walle.cc>
This patch adds in-target breakpoint and watchpoint support.
Signed-off-by: Michael Walle <michael@walle.cc>
---
target-lm32/TODO | 2 --
target-lm32/cpu.c | 1 +
target-lm32/cpu.h | 27 ++++++++++++--
target-lm32/helper.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++
target-lm32/helper.h | 3 ++
target-lm32/op_helper.c | 58 +++++++++++++++++++++++++++++-
target-lm32/translate.c | 6 ++--
7 files changed, 178 insertions(+), 8 deletions(-)
diff --git a/target-lm32/TODO b/target-lm32/TODO
index b9ea0c8..e163c42 100644
--- a/target-lm32/TODO
+++ b/target-lm32/TODO
@@ -1,3 +1 @@
-* disassembler (lm32-dis.c)
* linux-user emulation
-* native bp/wp emulation (?)
diff --git a/target-lm32/cpu.c b/target-lm32/cpu.c
index 869878c..2ca8dee 100644
--- a/target-lm32/cpu.c
+++ b/target-lm32/cpu.c
@@ -71,6 +71,7 @@ static void lm32_cpu_initfn(Object *obj)
if (tcg_enabled() && !tcg_initialized) {
tcg_initialized = true;
lm32_translate_init();
+ cpu_set_debug_excp_handler(lm32_debug_excp_handler);
}
}
diff --git a/target-lm32/cpu.h b/target-lm32/cpu.h
index 67a785e..cef9167 100644
--- a/target-lm32/cpu.h
+++ b/target-lm32/cpu.h
@@ -172,8 +172,11 @@ struct CPULM32State {
/* debug registers */
uint32_t dc; /* debug control */
- uint32_t bp[4]; /* breakpoint addresses */
- uint32_t wp[4]; /* watchpoint addresses */
+ uint32_t bp[4]; /* breakpoints */
+ uint32_t wp[4]; /* watchpoints */
+
+ CPUBreakpoint * cpu_breakpoint[4];
+ CPUWatchpoint * cpu_watchpoint[4];
CPU_COMMON
@@ -190,6 +193,19 @@ struct CPULM32State {
};
+typedef enum {
+ LM32_WP_DISABLED = 0,
+ LM32_WP_READ,
+ LM32_WP_WRITE,
+ LM32_WP_READ_WRITE,
+} lm32_wp_t;
+
+static inline lm32_wp_t lm32_wp_type(uint32_t dc, int idx)
+{
+ assert(idx < 4);
+ return (dc >> (idx+1)*2) & 0x3;
+}
+
#include "cpu-qom.h"
LM32CPU *cpu_lm32_init(const char *cpu_model);
@@ -202,6 +218,13 @@ int cpu_lm32_signal_handler(int host_signum, void *pinfo,
void *puc);
void lm32_translate_init(void);
void cpu_lm32_set_phys_msb_ignore(CPULM32State *env, int value);
+void QEMU_NORETURN raise_exception(CPULM32State *env, int index);
+void lm32_debug_excp_handler(CPULM32State *env);
+void lm32_breakpoint_insert(CPULM32State *env, int index, target_ulong address);
+void lm32_breakpoint_remove(CPULM32State *env, int index);
+void lm32_watchpoint_insert(CPULM32State *env, int index, target_ulong address,
+ lm32_wp_t wp_type);
+void lm32_watchpoint_remove(CPULM32State *env, int index);
static inline CPULM32State *cpu_init(const char *cpu_model)
{
diff --git a/target-lm32/helper.c b/target-lm32/helper.c
index 383bcf3..cff1b95 100644
--- a/target-lm32/helper.c
+++ b/target-lm32/helper.c
@@ -49,6 +49,95 @@ hwaddr lm32_cpu_get_phys_page_debug(CPUState *cs, vaddr addr)
}
}
+void lm32_breakpoint_insert(CPULM32State *env, int idx, target_ulong address)
+{
+ cpu_breakpoint_insert(env, address, BP_CPU, &env->cpu_breakpoint[idx]);
+}
+
+void lm32_breakpoint_remove(CPULM32State *env, int idx)
+{
+ if (!env->cpu_breakpoint[idx]) {
+ return;
+ }
+
+ cpu_breakpoint_remove_by_ref(env, env->cpu_breakpoint[idx]);
+ env->cpu_breakpoint[idx] = NULL;
+}
+
+void lm32_watchpoint_insert(CPULM32State *env, int idx, target_ulong address,
+ lm32_wp_t wp_type)
+{
+ int flags = 0;
+
+ switch (wp_type) {
+ case LM32_WP_DISABLED:
+ /* nothing to to */
+ break;
+ case LM32_WP_READ:
+ flags = BP_CPU | BP_STOP_BEFORE_ACCESS | BP_MEM_READ;
+ break;
+ case LM32_WP_WRITE:
+ flags = BP_CPU | BP_STOP_BEFORE_ACCESS | BP_MEM_WRITE;
+ break;
+ case LM32_WP_READ_WRITE:
+ flags = BP_CPU | BP_STOP_BEFORE_ACCESS | BP_MEM_ACCESS;
+ break;
+ }
+
+ if (flags != 0) {
+ cpu_watchpoint_insert(env, address, 1, flags,
+ &env->cpu_watchpoint[idx]);
+ }
+}
+
+void lm32_watchpoint_remove(CPULM32State *env, int idx)
+{
+ if (!env->cpu_watchpoint[idx]) {
+ return;
+ }
+
+ cpu_watchpoint_remove_by_ref(env, env->cpu_watchpoint[idx]);
+ env->cpu_watchpoint[idx] = NULL;
+}
+
+static bool check_watchpoints(CPULM32State *env)
+{
+ LM32CPU *cpu = lm32_env_get_cpu(env);
+ int i;
+
+ for (i = 0; i < cpu->def->num_watchpoints; i++) {
+ if (env->cpu_watchpoint[i] &&
+ env->cpu_watchpoint[i]->flags & BP_WATCHPOINT_HIT) {
+ return true;
+ }
+ }
+ return false;
+}
+
+void lm32_debug_excp_handler(CPULM32State *env)
+{
+ CPUBreakpoint *bp;
+
+ if (env->watchpoint_hit) {
+ if (env->watchpoint_hit->flags & BP_CPU) {
+ env->watchpoint_hit = NULL;
+ if (check_watchpoints(env)) {
+ raise_exception(env, EXCP_WATCHPOINT);
+ } else {
+ cpu_resume_from_signal(env, NULL);
+ }
+ }
+ } else {
+ QTAILQ_FOREACH(bp, &env->breakpoints, entry)
+ if (bp->pc == env->pc) {
+ if (bp->flags & BP_CPU) {
+ raise_exception(env, EXCP_BREAKPOINT);
+ }
+ break;
+ }
+ }
+}
+
void lm32_cpu_do_interrupt(CPUState *cs)
{
LM32CPU *cpu = LM32_CPU(cs);
diff --git a/target-lm32/helper.h b/target-lm32/helper.h
index 3ea15a6..ad44fdf 100644
--- a/target-lm32/helper.h
+++ b/target-lm32/helper.h
@@ -2,6 +2,9 @@
DEF_HELPER_2(raise_exception, void, env, i32)
DEF_HELPER_1(hlt, void, env)
+DEF_HELPER_3(wcsr_bp, void, env, i32, i32)
+DEF_HELPER_3(wcsr_wp, void, env, i32, i32)
+DEF_HELPER_2(wcsr_dc, void, env, i32)
DEF_HELPER_2(wcsr_im, void, env, i32)
DEF_HELPER_2(wcsr_ip, void, env, i32)
DEF_HELPER_2(wcsr_jtx, void, env, i32)
diff --git a/target-lm32/op_helper.c b/target-lm32/op_helper.c
index 8f5ef55..71f21d1 100644
--- a/target-lm32/op_helper.c
+++ b/target-lm32/op_helper.c
@@ -19,12 +19,17 @@
#define SHIFT 3
#include "exec/softmmu_template.h"
-void HELPER(raise_exception)(CPULM32State *env, uint32_t index)
+void raise_exception(CPULM32State *env, int index)
{
env->exception_index = index;
cpu_loop_exit(env);
}
+void HELPER(raise_exception)(CPULM32State *env, uint32_t index)
+{
+ raise_exception(env, index);
+}
+
void HELPER(hlt)(CPULM32State *env)
{
CPUState *cs = CPU(lm32_env_get_cpu(env));
@@ -34,6 +39,57 @@ void HELPER(hlt)(CPULM32State *env)
cpu_loop_exit(env);
}
+void HELPER(wcsr_bp)(CPULM32State *env, uint32_t bp, uint32_t idx)
+{
+ uint32_t addr = bp & ~1;
+
+ assert(idx < 4);
+
+ env->bp[idx] = bp;
+ lm32_breakpoint_remove(env, idx);
+ if (bp & 1) {
+ lm32_breakpoint_insert(env, idx, addr);
+ }
+}
+
+void HELPER(wcsr_wp)(CPULM32State *env, uint32_t wp, uint32_t idx)
+{
+ lm32_wp_t wp_type;
+
+ assert(idx < 4);
+
+ env->wp[idx] = wp;
+
+ wp_type = lm32_wp_type(env->dc, idx);
+ lm32_watchpoint_remove(env, idx);
+ if (wp_type != LM32_WP_DISABLED) {
+ lm32_watchpoint_insert(env, idx, wp, wp_type);
+ }
+}
+
+void HELPER(wcsr_dc)(CPULM32State *env, uint32_t dc)
+{
+ uint32_t old_dc;
+ int i;
+ lm32_wp_t old_type;
+ lm32_wp_t new_type;
+
+ old_dc = env->dc;
+ env->dc = dc;
+
+ for (i = 0; i < 4; i++) {
+ old_type = lm32_wp_type(old_dc, i);
+ new_type = lm32_wp_type(dc, i);
+
+ if (old_type != new_type) {
+ lm32_watchpoint_remove(env, i);
+ if (new_type != LM32_WP_DISABLED) {
+ lm32_watchpoint_insert(env, i, env->wp[i], new_type);
+ }
+ }
+ }
+}
+
void HELPER(wcsr_im)(CPULM32State *env, uint32_t im)
{
lm32_pic_set_im(env->pic_state, im);
diff --git a/target-lm32/translate.c b/target-lm32/translate.c
index 7e015b2..aea52da 100644
--- a/target-lm32/translate.c
+++ b/target-lm32/translate.c
@@ -873,7 +873,7 @@ static void dec_wcsr(DisasContext *dc)
gen_helper_wcsr_jrx(cpu_env, cpu_R[dc->r1]);
break;
case CSR_DC:
- tcg_gen_mov_tl(cpu_dc, cpu_R[dc->r1]);
+ gen_helper_wcsr_dc(cpu_env, cpu_R[dc->r1]);
break;
case CSR_BP0:
case CSR_BP1:
@@ -885,7 +885,7 @@ static void dec_wcsr(DisasContext *dc)
"breakpoint #%i is not available\n", no);
break;
}
- tcg_gen_mov_tl(cpu_bp[no], cpu_R[dc->r1]);
+ gen_helper_wcsr_bp(cpu_env, cpu_R[dc->r1], tcg_const_i32(no));
break;
case CSR_WP0:
case CSR_WP1:
@@ -897,7 +897,7 @@ static void dec_wcsr(DisasContext *dc)
"watchpoint #%i is not available\n", no);
break;
}
- tcg_gen_mov_tl(cpu_wp[no], cpu_R[dc->r1]);
+ gen_helper_wcsr_wp(cpu_env, cpu_R[dc->r1], tcg_const_i32(no));
break;
case CSR_CC:
case CSR_CFG:
--
1.7.10.4
next prev parent reply other threads:[~2013-10-14 16:30 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-14 16:29 [Qemu-devel] [PULL v2 00/11] target-lm32 updates Michael Walle
2013-10-14 16:29 ` [Qemu-devel] [PULL v2 01/11] lm32_sys: increase test case name length limit Michael Walle
2013-10-14 16:29 ` [Qemu-devel] [PULL v2 02/11] tests: lm32: new rule for single test cases Michael Walle
2013-10-14 16:29 ` [Qemu-devel] [PULL v2 03/11] milkymist-uart: use qemu_chr_fe_write_all() instead of qemu_chr_fe_write() Michael Walle
2013-10-14 16:29 ` [Qemu-devel] [PULL v2 04/11] lm32_uart/lm32_juart: use qemu_chr_fe_write_all() Michael Walle
2013-10-14 16:29 ` [Qemu-devel] [PULL v2 05/11] milkymist-vgafb: swap pixel data in source buffer Michael Walle
2013-10-14 17:05 ` Richard Henderson
2013-10-14 17:21 ` Michael Walle
2013-10-14 16:29 ` [Qemu-devel] [PULL v2 06/11] target-lm32: kill cpu_abort() calls Michael Walle
2013-10-14 18:01 ` Andreas Färber
2013-10-14 16:29 ` [Qemu-devel] [PULL v2 07/11] target-lm32: move model features to LM32CPU Michael Walle
2013-10-14 17:16 ` Andreas Färber
2013-10-14 22:46 ` [Qemu-devel] [PATCH v2] " Michael Walle
2013-11-17 20:46 ` Michael Walle
2013-11-18 14:47 ` Andreas Färber
2013-11-18 15:03 ` Andreas Färber
2013-10-14 16:29 ` Michael Walle [this message]
2013-10-14 16:29 ` [Qemu-devel] [PULL v2 09/11] lm32_sys: print test result on stderr Michael Walle
2013-10-14 16:29 ` [Qemu-devel] [PULL v2 10/11] lm32_sys: dump cpu state if test case fails Michael Walle
2013-10-14 16:29 ` [Qemu-devel] [PULL v2 11/11] target-lm32: stop VM on illegal or unknown instruction Michael Walle
2013-10-14 17:20 ` [Qemu-devel] [PULL v2 00/11] target-lm32 updates Michael Walle
2013-11-28 6:41 ` Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381768175-13520-9-git-send-email-michael@walle.cc \
--to=michael@walle.cc \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).