From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: chegu_vinod@hp.com
Subject: [Qemu-devel] [PATCH 19/39] memory: split dirty bitmap into three
Date: Wed, 6 Nov 2013 14:04:28 +0100 [thread overview]
Message-ID: <1383743088-8139-20-git-send-email-quintela@redhat.com> (raw)
In-Reply-To: <1383743088-8139-1-git-send-email-quintela@redhat.com>
After all the previous patches, spliting the bitmap gets direct.
ToDo: Why can't i include "exec/memory.h" into cpu-all.h? This is the
reason that I have duplicated DIRTY_MEMORY_NUM.
ToDo2: current bitmaps have one int as index, this limit us to 8TB RAM
guest, Should we move to longs?
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
exec.c | 9 ++++++---
include/exec/cpu-all.h | 4 +++-
include/exec/memory-internal.h | 11 ++++-------
3 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/exec.c b/exec.c
index 38b5c1c..98700d3 100644
--- a/exec.c
+++ b/exec.c
@@ -1166,9 +1166,12 @@ ram_addr_t qemu_ram_alloc_from_ptr(ram_addr_t size, void *host,
new_ram_size = last_ram_offset() >> TARGET_PAGE_BITS;
if (new_ram_size > old_ram_size) {
- ram_list.phys_dirty = g_realloc(ram_list.phys_dirty, new_ram_size);
- memset(ram_list.phys_dirty + (new_block->offset >> TARGET_PAGE_BITS),
- 0, size >> TARGET_PAGE_BITS);
+ int i;
+ for (i = 0; i < DIRTY_MEMORY_NUM; i++) {
+ ram_list.dirty_memory[i] =
+ bitmap_zero_extend(ram_list.dirty_memory[i],
+ old_ram_size, new_ram_size);
+ }
}
cpu_physical_memory_set_dirty_range(new_block->offset, size);
diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h
index b6998f0..019dc20 100644
--- a/include/exec/cpu-all.h
+++ b/include/exec/cpu-all.h
@@ -456,10 +456,12 @@ typedef struct RAMBlock {
int fd;
} RAMBlock;
+#define DIRTY_MEMORY_NUM 3
+
typedef struct RAMList {
QemuMutex mutex;
/* Protected by the iothread lock. */
- uint8_t *phys_dirty;
+ unsigned long *dirty_memory[DIRTY_MEMORY_NUM];
RAMBlock *mru_block;
/* Protected by the ramlist lock. */
QTAILQ_HEAD(, RAMBlock) blocks;
diff --git a/include/exec/memory-internal.h b/include/exec/memory-internal.h
index 3f885a6..71f198e 100644
--- a/include/exec/memory-internal.h
+++ b/include/exec/memory-internal.h
@@ -44,7 +44,7 @@ static inline bool cpu_physical_memory_get_dirty_flag(ram_addr_t addr,
unsigned client)
{
assert(client < DIRTY_MEMORY_NUM);
- return ram_list.phys_dirty[addr >> TARGET_PAGE_BITS] & (1 << client);
+ return test_bit(addr >> TARGET_PAGE_BITS, ram_list.dirty_memory[client]);
}
/* read dirty bit (return 0 or 1) */
@@ -75,7 +75,8 @@ static inline void cpu_physical_memory_set_dirty_flag(ram_addr_t addr,
unsigned client)
{
assert(client < DIRTY_MEMORY_NUM);
- ram_list.phys_dirty[addr >> TARGET_PAGE_BITS] |= (1 << client);
+
+ set_bit(addr >> TARGET_PAGE_BITS, ram_list.dirty_memory[client]);
}
static inline void cpu_physical_memory_set_dirty(ram_addr_t addr)
@@ -88,11 +89,7 @@ static inline void cpu_physical_memory_set_dirty(ram_addr_t addr)
static inline void cpu_physical_memory_clear_dirty_flag(ram_addr_t addr,
unsigned client)
{
- int mask = ~(1 << client);
-
- assert(client < DIRTY_MEMORY_NUM);
-
- ram_list.phys_dirty[addr >> TARGET_PAGE_BITS] &= mask;
+ clear_bit(addr >> TARGET_PAGE_BITS, ram_list.dirty_memory[client]);
}
static inline void cpu_physical_memory_set_dirty_range(ram_addr_t start,
--
1.8.3.1
next prev parent reply other threads:[~2013-11-06 13:05 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-06 13:04 [Qemu-devel] [PATCH v2 00/39] bitmap handling optimization Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 01/39] Move prototypes to memory.h Juan Quintela
2013-11-07 9:36 ` Orit Wasserman
2013-11-06 13:04 ` [Qemu-devel] [PATCH 02/39] memory: cpu_physical_memory_set_dirty_flags() result is never used Juan Quintela
2013-11-07 9:42 ` Orit Wasserman
2013-11-06 13:04 ` [Qemu-devel] [PATCH 03/39] memory: cpu_physical_memory_set_dirty_range() return void Juan Quintela
2013-11-07 9:51 ` Orit Wasserman
2013-11-06 13:04 ` [Qemu-devel] [PATCH 04/39] exec: use accessor function to know if memory is dirty Juan Quintela
2013-11-07 10:00 ` Orit Wasserman
2013-11-06 13:04 ` [Qemu-devel] [PATCH 05/39] memory: create function to set a single dirty bit Juan Quintela
2013-11-07 11:37 ` Orit Wasserman
2013-11-06 13:04 ` [Qemu-devel] [PATCH 06/39] exec: create function to get " Juan Quintela
2013-11-06 23:11 ` Eric Blake
2013-11-06 13:04 ` [Qemu-devel] [PATCH 07/39] memory: make cpu_physical_memory_is_dirty return bool Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 08/39] exec: simplify notdirty_mem_write() Juan Quintela
2013-11-06 23:12 ` Eric Blake
2013-11-06 13:04 ` [Qemu-devel] [PATCH 09/39] memory: all users of cpu_physical_memory_get_dirty used only one flag Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 10/39] memory: set single dirty flags when possible Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 11/39] memory: cpu_physical_memory_set_dirty_range() allways dirty all flags Juan Quintela
2013-11-06 23:15 ` Eric Blake
2013-11-06 13:04 ` [Qemu-devel] [PATCH 12/39] memory: cpu_physical_memory_mask_dirty_range() always clear a single flag Juan Quintela
2013-11-06 23:18 ` Eric Blake
2013-11-06 13:04 ` [Qemu-devel] [PATCH 13/39] memory: use DIRTY_MEMORY_* instead of *_DIRTY_FLAG Juan Quintela
2013-11-06 23:24 ` Eric Blake
2013-11-06 13:04 ` [Qemu-devel] [PATCH 14/39] memory: use bit 2 for migration Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 15/39] memory: make sure that client is always inside range Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 16/39] memory: only resize dirty bitmap when memory size increases Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 17/39] memory: cpu_physical_memory_clear_dirty_flag() result is never used Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 18/39] bitmap: Add bitmap_zero_extend operation Juan Quintela
2013-11-06 13:04 ` Juan Quintela [this message]
2013-11-06 23:39 ` [Qemu-devel] [PATCH 19/39] memory: split dirty bitmap into three Eric Blake
2013-11-06 13:04 ` [Qemu-devel] [PATCH 20/39] memory: unfold cpu_physical_memory_clear_dirty_flag() in its only user Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 21/39] memory: unfold cpu_physical_memory_set_dirty() " Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 22/39] memory: unfold cpu_physical_memory_set_dirty_flag() Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 23/39] memory: make cpu_physical_memory_get_dirty() the main function Juan Quintela
2013-11-06 23:44 ` Eric Blake
2013-11-06 13:04 ` [Qemu-devel] [PATCH 24/39] memory: cpu_physical_memory_get_dirty() is used as returning a bool Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 25/39] memory: s/mask/clear/ cpu_physical_memory_mask_dirty_range Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 26/39] memory: use find_next_bit() to find dirty bits Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 27/39] memory: cpu_physical_memory_set_dirty_range() now uses bitmap operations Juan Quintela
2013-11-06 23:49 ` Eric Blake
2013-11-06 13:04 ` [Qemu-devel] [PATCH 28/39] memory: cpu_physical_memory_clear_dirty_range() " Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 29/39] memory: s/dirty/clean/ in cpu_physical_memory_is_dirty() Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 30/39] memory: make cpu_physical_memory_reset_dirty() take a length parameter Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 31/39] memory: cpu_physical_memory_set_dirty_tracking() should return void Juan Quintela
2013-11-06 23:55 ` Eric Blake
2013-11-06 13:04 ` [Qemu-devel] [PATCH 32/39] memory: split cpu_physical_memory_* functions to its own include Juan Quintela
2013-11-06 15:54 ` Paolo Bonzini
2013-11-06 13:04 ` [Qemu-devel] [PATCH 33/39] memory: unfold memory_region_test_and_clear() Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 34/39] kvm: use directly cpu_physical_memory_* api for tracking dirty pages Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 35/39] kvm: refactor start address calculation Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 36/39] memory: move bitmap synchronization to its own function Juan Quintela
2013-11-06 15:56 ` Paolo Bonzini
2013-11-06 16:22 ` Juan Quintela
2013-11-06 16:23 ` Paolo Bonzini
2013-12-18 8:54 ` Alexander Graf
2013-11-06 13:04 ` [Qemu-devel] [PATCH 37/39] memory: syncronize kvm bitmap using bitmaps operations Juan Quintela
2013-11-06 15:58 ` Paolo Bonzini
2013-11-06 13:04 ` [Qemu-devel] [PATCH 38/39] ram: split function that synchronizes a range Juan Quintela
2013-11-06 13:04 ` [Qemu-devel] [PATCH 39/39] migration: synchronize memory bitmap 64bits at a time Juan Quintela
2013-11-06 14:37 ` [Qemu-devel] [PATCH v2 00/39] bitmap handling optimization Gerd Hoffmann
2013-11-06 15:38 ` Juan Quintela
2013-11-07 11:23 ` Gerd Hoffmann
2013-11-06 15:49 ` Paolo Bonzini
2013-11-25 6:39 ` Michael R. Hines
2013-11-25 9:45 ` Paolo Bonzini
2013-11-08 15:18 ` Chegu Vinod
2013-11-25 6:15 ` Michael R. Hines
2013-11-25 6:58 ` Michael R. Hines
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383743088-8139-20-git-send-email-quintela@redhat.com \
--to=quintela@redhat.com \
--cc=chegu_vinod@hp.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).