From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, pbonzini@redhat.com, armbru@redhat.com,
stefanha@redhat.com
Subject: [Qemu-devel] [RFC PATCH 12/19] block: Allow waiting for overlapping requests between begin/end
Date: Fri, 6 Dec 2013 18:22:53 +0100 [thread overview]
Message-ID: <1386350580-5666-13-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1386350580-5666-1-git-send-email-kwolf@redhat.com>
Previously, it was not possible to use wait_for_overlapping_requests()
between tracked_request_begin()/end() because it would wait for itself.
Ignore the current request in the overlap check and run more of the
bdrv_co_do_preadv/pwritev code with a BdrvTrackedRequest present.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block.c | 38 ++++++++++++++++++++------------------
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/block.c b/block.c
index 2f1d72e..5eaeb3a 100644
--- a/block.c
+++ b/block.c
@@ -2083,7 +2083,7 @@ static bool tracked_request_overlaps(BdrvTrackedRequest *req,
}
static void coroutine_fn wait_for_overlapping_requests(BlockDriverState *bs,
- int64_t offset, unsigned int bytes)
+ BdrvTrackedRequest *self, int64_t offset, unsigned int bytes)
{
BdrvTrackedRequest *req;
int64_t cluster_offset;
@@ -2101,6 +2101,9 @@ static void coroutine_fn wait_for_overlapping_requests(BlockDriverState *bs,
do {
retry = false;
QLIST_FOREACH(req, &bs->tracked_requests, list) {
+ if (req == self) {
+ continue;
+ }
if (tracked_request_overlaps(req, cluster_offset, cluster_bytes)) {
/* Hitting this means there was a reentrant request, for
* example, a block driver issuing nested requests. This must
@@ -2659,10 +2662,10 @@ err:
* implemented by the caller.
*/
static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
- int64_t offset, unsigned int bytes, QEMUIOVector *qiov, int flags)
+ BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
+ QEMUIOVector *qiov, int flags)
{
BlockDriver *drv = bs->drv;
- BdrvTrackedRequest req;
int ret;
int64_t sector_num = offset >> BDRV_SECTOR_BITS;
@@ -2677,11 +2680,9 @@ static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
}
if (bs->copy_on_read_in_flight) {
- wait_for_overlapping_requests(bs, offset, bytes);
+ wait_for_overlapping_requests(bs, req, offset, bytes);
}
- tracked_request_begin(&req, bs, offset, bytes, false);
-
if (flags & BDRV_REQ_COPY_ON_READ) {
int pnum;
@@ -2728,8 +2729,6 @@ static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
}
out:
- tracked_request_end(&req);
-
if (flags & BDRV_REQ_COPY_ON_READ) {
bs->copy_on_read_in_flight--;
}
@@ -2745,6 +2744,8 @@ static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
BdrvRequestFlags flags)
{
BlockDriver *drv = bs->drv;
+ BdrvTrackedRequest req;
+
/* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
uint8_t *head_buf = NULL;
@@ -2794,9 +2795,11 @@ static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
bytes = ROUND_UP(bytes, align);
}
- ret = bdrv_aligned_preadv(bs, offset, bytes,
+ tracked_request_begin(&req, bs, offset, bytes, false);
+ ret = bdrv_aligned_preadv(bs, &req, offset, bytes,
use_local_qiov ? &local_qiov : qiov,
flags);
+ tracked_request_end(&req);
if (use_local_qiov) {
qemu_iovec_destroy(&local_qiov);
@@ -2871,10 +2874,10 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
* Forwards an already correctly aligned write request to the BlockDriver.
*/
static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
- int64_t offset, unsigned int bytes, QEMUIOVector *qiov, int flags)
+ BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
+ QEMUIOVector *qiov, int flags)
{
BlockDriver *drv = bs->drv;
- BdrvTrackedRequest req;
int ret;
int64_t sector_num = offset >> BDRV_SECTOR_BITS;
@@ -2884,12 +2887,10 @@ static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
if (bs->copy_on_read_in_flight) {
- wait_for_overlapping_requests(bs, offset, bytes);
+ wait_for_overlapping_requests(bs, req, offset, bytes);
}
- tracked_request_begin(&req, bs, offset, bytes, true);
-
- ret = notifier_with_return_list_notify(&bs->before_write_notifiers, &req);
+ ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
if (ret < 0) {
/* Do nothing, write notifier decided to fail this request */
@@ -2914,8 +2915,6 @@ static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
}
- tracked_request_end(&req);
-
return ret;
}
@@ -2926,6 +2925,7 @@ static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
BdrvRequestFlags flags)
{
+ BdrvTrackedRequest req;
int ret;
if (!bs->drv) {
@@ -2943,7 +2943,9 @@ static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
bdrv_io_limits_intercept(bs, bytes << BDRV_SECTOR_BITS, true);
}
- ret = bdrv_aligned_pwritev(bs, offset, bytes, qiov, flags);
+ tracked_request_begin(&req, bs, offset, bytes, true);
+ ret = bdrv_aligned_pwritev(bs, &req, offset, bytes, qiov, flags);
+ tracked_request_end(&req);
return ret;
}
--
1.8.1.4
next prev parent reply other threads:[~2013-12-06 17:23 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-06 17:22 [Qemu-devel] [RFC PATCH 00/19] block: Support for 512b-on-4k emulation Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 01/19] qemu_memalign: Allow small alignments Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 02/19] block: Detect unaligned length in bdrv_qiov_is_aligned() Kevin Wolf
2013-12-06 19:12 ` Eric Blake
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 03/19] block: Don't use guest sector size for qemu_blockalign() Kevin Wolf
2013-12-10 3:18 ` Wenchao Xia
2013-12-10 9:42 ` Kevin Wolf
2013-12-11 2:43 ` Wenchao Xia
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 04/19] block: rename buffer_alignment to guest_block_size Kevin Wolf
2013-12-10 3:25 ` Wenchao Xia
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 05/19] raw: Probe required direct I/O alignment Kevin Wolf
2013-12-06 17:53 ` Paolo Bonzini
2013-12-09 12:58 ` Kevin Wolf
2013-12-09 13:40 ` Paolo Bonzini
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 06/19] block: Introduce bdrv_aligned_preadv() Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 07/19] block: Introduce bdrv_co_do_preadv() Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 08/19] block: Introduce bdrv_aligned_pwritev() Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 09/19] block: write: Handle COR dependency after I/O throttling Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 10/19] block: Introduce bdrv_co_do_pwritev() Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 11/19] block: Switch BdrvTrackedRequest to byte granularity Kevin Wolf
2013-12-06 17:22 ` Kevin Wolf [this message]
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 13/19] block: Make zero-after-EOF work with larger alignment Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 14/19] block: Generalise and optimise COR serialisation Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 15/19] block: Make overlap range for serialisation dynamic Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 16/19] block: Align requests in bdrv_co_do_pwritev() Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 17/19] block: Change coroutine wrapper to byte granularity Kevin Wolf
2013-12-06 17:22 ` [Qemu-devel] [RFC PATCH 18/19] block: Make bdrv_pread() a bdrv_prwv_co() wrapper Kevin Wolf
2013-12-06 17:23 ` [Qemu-devel] [RFC PATCH 19/19] block: Make bdrv_pwrite() " Kevin Wolf
2013-12-06 17:55 ` [Qemu-devel] [RFC PATCH 00/19] block: Support for 512b-on-4k emulation Paolo Bonzini
2013-12-09 11:16 ` Kevin Wolf
2013-12-09 12:51 ` Stefan Hajnoczi
2013-12-09 13:02 ` Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386350580-5666-13-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=armbru@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).