From: Tom Musta <tommusta@gmail.com>
To: qemu-devel@nongnu.org
Cc: Tom Musta <tommusta@gmail.com>, qemu-ppc@nongnu.org
Subject: [Qemu-devel] [V2 PATCH 02/18] target-ppc: Add ISA2.06 bpermd Instruction
Date: Wed, 11 Dec 2013 13:16:22 -0600 [thread overview]
Message-ID: <1386789398-5239-3-git-send-email-tommusta@gmail.com> (raw)
In-Reply-To: <1386789398-5239-1-git-send-email-tommusta@gmail.com>
This patch adds the Bit Permute Doubleword (bpermd) instruction,
which was introduced in Power ISA 2.06 as part of the base 64-bit
architecture.
V2: Addressing stylistic comments from Richard Henderson.
Signed-off-by: Tom Musta <tommusta@gmail.com>
---
target-ppc/helper.h | 1 +
target-ppc/int_helper.c | 20 ++++++++++++++++++++
target-ppc/translate.c | 10 ++++++++++
3 files changed, 31 insertions(+), 0 deletions(-)
diff --git a/target-ppc/helper.h b/target-ppc/helper.h
index 6250eba..1ec9c65 100644
--- a/target-ppc/helper.h
+++ b/target-ppc/helper.h
@@ -41,6 +41,7 @@ DEF_HELPER_3(sraw, tl, env, tl, tl)
#if defined(TARGET_PPC64)
DEF_HELPER_FLAGS_1(cntlzd, TCG_CALL_NO_RWG_SE, tl, tl)
DEF_HELPER_FLAGS_1(popcntd, TCG_CALL_NO_RWG_SE, tl, tl)
+DEF_HELPER_3(bpermd, i64, env, i64, i64)
DEF_HELPER_3(srad, tl, env, tl, tl)
#endif
diff --git a/target-ppc/int_helper.c b/target-ppc/int_helper.c
index e50bdd2..abc69a7 100644
--- a/target-ppc/int_helper.c
+++ b/target-ppc/int_helper.c
@@ -53,6 +53,26 @@ target_ulong helper_cntlzd(target_ulong t)
}
#endif
+#if defined(TARGET_PPC64)
+
+uint64_t helper_bpermd(CPUPPCState *env, uint64_t rs, uint64_t rb)
+{
+ int i;
+ uint64_t ra = 0;
+
+ for (i = 0; i < 8; i++) {
+ int index = (rs >> (i*8)) & 0xFF;
+ if (index < 64) {
+ if (rb & (1ul << (63-index))) {
+ ra |= 1 << i;
+ }
+ }
+ }
+ return ra;
+}
+
+#endif
+
target_ulong helper_cmpb(target_ulong rs, target_ulong rb)
{
target_ulong mask = 0xff;
diff --git a/target-ppc/translate.c b/target-ppc/translate.c
index 1f7e499..0d39de2 100644
--- a/target-ppc/translate.c
+++ b/target-ppc/translate.c
@@ -1525,6 +1525,15 @@ static void gen_prtyd(DisasContext *ctx)
#endif
#if defined(TARGET_PPC64)
+/* bpermd */
+static void gen_bpermd(DisasContext *ctx)
+{
+ gen_helper_bpermd(cpu_gpr[rA(ctx->opcode)], cpu_env,
+ cpu_gpr[rS(ctx->opcode)], cpu_gpr[rB(ctx->opcode)]);
+}
+#endif
+
+#if defined(TARGET_PPC64)
/* extsw & extsw. */
GEN_LOGICAL1(extsw, tcg_gen_ext32s_tl, 0x1E, PPC_64B);
@@ -9322,6 +9331,7 @@ GEN_HANDLER_E(prtyw, 0x1F, 0x1A, 0x04, 0x0000F801, PPC_NONE, PPC2_ISA205),
GEN_HANDLER(popcntd, 0x1F, 0x1A, 0x0F, 0x0000F801, PPC_POPCNTWD),
GEN_HANDLER(cntlzd, 0x1F, 0x1A, 0x01, 0x00000000, PPC_64B),
GEN_HANDLER_E(prtyd, 0x1F, 0x1A, 0x05, 0x0000F801, PPC_NONE, PPC2_ISA205),
+GEN_HANDLER_E(bpermd, 0x1F, 0x1C, 0x07, 0x00000001, PPC_NONE, PPC2_ISA206),
#endif
GEN_HANDLER(rlwimi, 0x14, 0xFF, 0xFF, 0x00000000, PPC_INTEGER),
GEN_HANDLER(rlwinm, 0x15, 0xFF, 0xFF, 0x00000000, PPC_INTEGER),
--
1.7.1
next prev parent reply other threads:[~2013-12-11 19:17 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-11 19:16 [Qemu-devel] [V2 PATCH 00/18] target-ppc: Base ISA V2.06 for Power7/Power8 Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 01/18] target-ppc: Add Flag for Power ISA V2.06 Tom Musta
2013-12-11 19:16 ` Tom Musta [this message]
2013-12-11 21:19 ` [Qemu-devel] [V2 PATCH 02/18] target-ppc: Add ISA2.06 bpermd Instruction Richard Henderson
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 03/18] target-ppc: Add ISA2.06 divdeu[o] Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 04/18] target-ppc: Add ISA2.06 divde[o] Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 05/18] target-ppc: Add ISA 2.06 divwe[u][o] Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 06/18] target-ppc: Add ISA2.06 lbarx, lharx Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 07/18] target-ppc: Add ISA 2.06 stbcx. and sthcx. Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 08/18] target-ppc: Add ISA2.06 Float to Integer Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 09/18] softfloat: Fix Handling of Small Negatives in float64_to_uint64 Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 10/18] softfloat: Fix float64_to_uint64_round_to_zero Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 11/18] softfloat: Fix float64_to_uint32 Tom Musta
2013-12-11 19:53 ` Peter Maydell
2013-12-11 20:39 ` Tom Musta
2013-12-17 17:45 ` Peter Maydell
2013-12-17 19:32 ` Peter Maydell
2013-12-18 17:32 ` Tom Musta
2013-12-18 18:03 ` Peter Maydell
2013-12-18 18:23 ` Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 12/18] softfloat: Fix float64_to_uint32_round_to_zero Tom Musta
2013-12-11 19:54 ` Peter Maydell
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 13/18] target-ppc: Add ISA 2.06 fcfid[u][s] Instructions Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 14/18] target-ppc: Fix and enable fri[mnpz] Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 15/18] target-ppc: Add ISA 2.06 ftdiv Instruction Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 16/18] target-ppc: Add ISA 2.06 ftsqrt Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 17/18] target-ppc: Enable frsqrtes on Power7 and Power8 Tom Musta
2013-12-11 19:16 ` [Qemu-devel] [V2 PATCH 18/18] target-ppc: Add ISA2.06 lfiwzx Instruction Tom Musta
2013-12-11 19:40 ` [Qemu-devel] [V2 PATCH 00/18] target-ppc: Base ISA V2.06 for Power7/Power8 Peter Maydell
2013-12-11 19:42 ` Tom Musta
2013-12-11 19:50 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386789398-5239-3-git-send-email-tommusta@gmail.com \
--to=tommusta@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).