From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, pbonzini@redhat.com, pl@kamp.de, stefanha@redhat.com
Subject: [Qemu-devel] [PATCH v2 10/24] block: Introduce bdrv_co_do_preadv()
Date: Fri, 13 Dec 2013 14:22:45 +0100 [thread overview]
Message-ID: <1386940979-3824-11-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1386940979-3824-1-git-send-email-kwolf@redhat.com>
Similar to bdrv_pread(), which aligns byte-aligned request to 512 byte
sectors, bdrv_co_do_preadv() takes a byte-aligned request and aligns it
to the alignment specified in bs->request_alignment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 57 insertions(+), 6 deletions(-)
diff --git a/block.c b/block.c
index cbc9f6d..7812d8f 100644
--- a/block.c
+++ b/block.c
@@ -2786,17 +2786,23 @@ out:
/*
* Handle a read request in coroutine context
*/
-static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
+static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
+ int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
BdrvRequestFlags flags)
{
BlockDriver *drv = bs->drv;
+ /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
+ uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
+ uint8_t *head_buf = NULL;
+ uint8_t *tail_buf = NULL;
+ QEMUIOVector local_qiov;
+ bool use_local_qiov = false;
int ret;
if (!drv) {
return -ENOMEDIUM;
}
- if (bdrv_check_request(bs, sector_num, nb_sectors)) {
+ if (bdrv_check_byte_request(bs, offset, bytes)) {
return -EIO;
}
@@ -2806,14 +2812,59 @@ static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
/* throttling disk I/O */
if (bs->io_limits_enabled) {
- bdrv_io_limits_intercept(bs, nb_sectors, false);
+ bdrv_io_limits_intercept(bs, bytes >> BDRV_SECTOR_BITS, false);
+ }
+
+ /* Align read if necessary by padding qiov */
+ if (offset & (align - 1)) {
+ head_buf = qemu_blockalign(bs, align);
+ qemu_iovec_init(&local_qiov, qiov->niov + 2);
+ qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
+ qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
+ use_local_qiov = true;
+
+ bytes += offset & (align - 1);
+ offset = offset & ~(align - 1);
+ }
+
+ if ((offset + bytes) & (align - 1)) {
+ if (!use_local_qiov) {
+ qemu_iovec_init(&local_qiov, qiov->niov + 1);
+ qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
+ use_local_qiov = true;
+ }
+ tail_buf = qemu_blockalign(bs, align);
+ qemu_iovec_add(&local_qiov, tail_buf,
+ align - ((offset + bytes) & (align - 1)));
+
+ bytes = ROUND_UP(bytes, align);
+ }
+
+ ret = bdrv_aligned_preadv(bs, offset, bytes,
+ use_local_qiov ? &local_qiov : qiov,
+ flags);
+
+ if (use_local_qiov) {
+ qemu_iovec_destroy(&local_qiov);
+ qemu_vfree(head_buf);
+ qemu_vfree(tail_buf);
}
- ret = bdrv_aligned_preadv(bs, sector_num << BDRV_SECTOR_BITS,
- nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
return ret;
}
+static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
+ int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
+ BdrvRequestFlags flags)
+{
+ if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
+ return -EINVAL;
+ }
+
+ return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
+ nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
+}
+
int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov)
{
--
1.8.1.4
next prev parent reply other threads:[~2013-12-13 13:23 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-13 13:22 [Qemu-devel] [PATCH v2 00/24] block: Support for 512b-on-4k emulatio Kevin Wolf
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 01/24] block: Move initialisation of BlockLimits to bdrv_refresh_limits() Kevin Wolf
2014-01-11 22:24 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 02/24] block: Inherit opt_transfer_length Kevin Wolf
2014-01-11 22:24 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 03/24] block: Update BlockLimits when they might have changed Kevin Wolf
2014-01-11 22:24 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 04/24] qemu_memalign: Allow small alignments Kevin Wolf
2014-01-11 22:25 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 05/24] block: Detect unaligned length in bdrv_qiov_is_aligned() Kevin Wolf
2014-01-11 22:25 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 06/24] block: Don't use guest sector size for qemu_blockalign() Kevin Wolf
2014-01-11 22:25 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 07/24] block: rename buffer_alignment to guest_block_size Kevin Wolf
2014-01-11 22:26 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 08/24] raw: Probe required direct I/O alignment Kevin Wolf
2013-12-24 3:39 ` Wenchao Xia
2014-01-11 22:26 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 09/24] block: Introduce bdrv_aligned_preadv() Kevin Wolf
2013-12-24 7:23 ` Wenchao Xia
2014-01-11 22:27 ` Max Reitz
2013-12-13 13:22 ` Kevin Wolf [this message]
2013-12-26 4:08 ` [Qemu-devel] [PATCH v2 10/24] block: Introduce bdrv_co_do_preadv() Wenchao Xia
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 11/24] block: Introduce bdrv_aligned_pwritev() Kevin Wolf
2014-01-11 22:27 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 12/24] block: write: Handle COR dependency after I/O throttling Kevin Wolf
2014-01-11 22:27 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 13/24] block: Introduce bdrv_co_do_pwritev() Kevin Wolf
2014-01-10 18:11 ` Max Reitz
2014-01-16 12:25 ` Kevin Wolf
2014-01-17 1:38 ` Fam Zheng
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 14/24] block: Switch BdrvTrackedRequest to byte granularity Kevin Wolf
2014-01-10 18:34 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 15/24] block: Allow waiting for overlapping requests between begin/end Kevin Wolf
2014-01-11 22:28 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 16/24] block: Make zero-after-EOF work with larger alignment Kevin Wolf
2014-01-10 19:07 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 17/24] block: Generalise and optimise COR serialisation Kevin Wolf
2014-01-11 22:28 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 18/24] block: Make overlap range for serialisation dynamic Kevin Wolf
2014-01-11 22:28 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 19/24] block: Allow wait_serialising_requests() at any point Kevin Wolf
2013-12-27 4:17 ` Wenchao Xia
2014-01-13 11:29 ` Kevin Wolf
2014-01-14 3:13 ` Wenchao Xia
2014-01-11 22:29 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 20/24] block: Align requests in bdrv_co_do_pwritev() Kevin Wolf
2014-01-11 22:29 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 21/24] block: Change coroutine wrapper to byte granularity Kevin Wolf
2014-01-11 22:29 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 22/24] block: Make bdrv_pread() a bdrv_prwv_co() wrapper Kevin Wolf
2014-01-11 22:29 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 23/24] block: Make bdrv_pwrite() " Kevin Wolf
2014-01-11 22:22 ` Max Reitz
2013-12-13 13:22 ` [Qemu-devel] [PATCH v2 24/24] iscsi: Set bs->request_alignment Kevin Wolf
2014-01-11 22:30 ` Max Reitz
2013-12-27 4:27 ` [Qemu-devel] [PATCH v2 00/24] block: Support for 512b-on-4k emulatio Wenchao Xia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386940979-3824-11-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=pbonzini@redhat.com \
--cc=pl@kamp.de \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).