From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Cc: patches@linaro.org, "Michael Matz" <matz@suse.de>,
"Claudio Fontana" <claudio.fontana@linaro.org>,
"Dirk Mueller" <dmueller@suse.de>,
"Will Newton" <will.newton@linaro.org>,
"Laurent Desnogues" <laurent.desnogues@gmail.com>,
"Alex Bennée" <alex.bennee@linaro.org>,
kvmarm@lists.cs.columbia.edu,
"Christoffer Dall" <christoffer.dall@linaro.org>,
"Richard Henderson" <rth@twiddle.net>
Subject: [Qemu-devel] [PATCH v3 3/8] target-arm: A64: add support for ld/st with reg offset
Date: Fri, 13 Dec 2013 19:17:57 +0000 [thread overview]
Message-ID: <1386962282-6839-4-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1386962282-6839-1-git-send-email-peter.maydell@linaro.org>
From: Alex Bennée <alex@bennee.com>
This adds support for the load/store forms using a register offset.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target-arm/translate-a64.c | 144 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 143 insertions(+), 1 deletion(-)
diff --git a/target-arm/translate-a64.c b/target-arm/translate-a64.c
index 3712a6d..742c714 100644
--- a/target-arm/translate-a64.c
+++ b/target-arm/translate-a64.c
@@ -402,6 +402,54 @@ static void do_fp_ld(DisasContext *s, int destidx, TCGv_i64 tcg_addr, int size)
tcg_temp_free_i64(tmphi);
}
+/*
+ * This utility function is for doing register extension with an
+ * optional shift. You will likely want to pass a temporary for the
+ * destination register. See DecodeRegExtend() in the ARM ARM.
+ */
+static void ext_and_shift_reg(TCGv_i64 tcg_out, TCGv_i64 tcg_in,
+ int option, unsigned int shift)
+{
+ int extsize = extract32(option, 0, 2);
+ bool is_signed = extract32(option, 2, 1);
+
+ if (is_signed) {
+ switch (extsize) {
+ case 0:
+ tcg_gen_ext8s_i64(tcg_out, tcg_in);
+ break;
+ case 1:
+ tcg_gen_ext16s_i64(tcg_out, tcg_in);
+ break;
+ case 2:
+ tcg_gen_ext32s_i64(tcg_out, tcg_in);
+ break;
+ case 3:
+ tcg_gen_mov_i64(tcg_out, tcg_in);
+ break;
+ }
+ } else {
+ switch (extsize) {
+ case 0:
+ tcg_gen_ext8u_i64(tcg_out, tcg_in);
+ break;
+ case 1:
+ tcg_gen_ext16u_i64(tcg_out, tcg_in);
+ break;
+ case 2:
+ tcg_gen_ext32u_i64(tcg_out, tcg_in);
+ break;
+ case 3:
+ tcg_gen_mov_i64(tcg_out, tcg_in);
+ break;
+ }
+ }
+
+ if (shift) {
+ tcg_gen_shli_i64(tcg_out, tcg_out, shift);
+ }
+}
+
static inline void gen_check_sp_alignment(DisasContext *s)
{
/* The AArch64 architecture mandates that (if enabled via PSTATE
@@ -900,6 +948,96 @@ static void disas_ldst_pair(DisasContext *s, uint32_t insn)
}
/*
+ * C3.3.10 Load/store (register offset)
+ *
+ * 31 30 29 27 26 25 24 23 22 21 20 16 15 13 12 11 10 9 5 4 0
+ * +----+-------+---+-----+-----+---+------+-----+--+-----+----+----+
+ * |size| 1 1 1 | V | 0 0 | opc | 1 | Rm | opt | S| 1 0 | Rn | Rt |
+ * +----+-------+---+-----+-----+---+------+-----+--+-----+----+----+
+ *
+ * For non-vector:
+ * size: 00-> byte, 01 -> 16 bit, 10 -> 32bit, 11 -> 64bit
+ * opc: 00 -> store, 01 -> loadu, 10 -> loads 64, 11 -> loads 32
+ * For vector:
+ * size is opc<1>:size<1:0> so 100 -> 128 bit; 110 and 111 unallocated
+ * opc<0>: 0 -> store, 1 -> load
+ * V: 1 -> vector/simd
+ * opt: extend encoding (see DecodeRegExtend)
+ * S: if S=1 then scale (essentially index by sizeof(size))
+ * Rt: register to transfer into/out of
+ * Rn: address register or SP for base
+ * Rm: offset register or ZR for offset
+ */
+static void disas_ldst_reg_roffset(DisasContext *s, uint32_t insn)
+{
+ int rt = extract32(insn, 0, 5);
+ int rn = extract32(insn, 5, 5);
+ int shift = extract32(insn, 12, 1);
+ int rm = extract32(insn, 16, 5);
+ int opc = extract32(insn, 22, 2);
+ int opt = extract32(insn, 13, 3);
+ int size = extract32(insn, 30, 2);
+ bool is_signed = false;
+ bool is_store = false;
+ bool is_extended = false;
+ bool is_vector = extract32(insn, 26, 1);
+
+ TCGv_i64 tcg_rm;
+ TCGv_i64 tcg_addr;
+
+ if (extract32(opt, 1, 1) == 0) {
+ unallocated_encoding(s);
+ return;
+ }
+
+ if (is_vector) {
+ size |= (opc & 2) << 1;
+ if (size > 4) {
+ unallocated_encoding(s);
+ return;
+ }
+ is_store = ((opc & 1) == 0);
+ } else {
+ if (size == 3 && opc == 2) {
+ /* PRFM - prefetch */
+ return;
+ }
+ if (opc == 3 && size > 1) {
+ unallocated_encoding(s);
+ return;
+ }
+ is_store = (opc == 0);
+ is_signed = opc & (1<<1);
+ is_extended = (size < 3) && (opc & 1);
+ }
+
+ if (rn == 31) {
+ gen_check_sp_alignment(s);
+ }
+ tcg_addr = read_cpu_reg_sp(s, rn, 1);
+
+ tcg_rm = read_cpu_reg(s, rm, 1);
+ ext_and_shift_reg(tcg_rm, tcg_rm, opt, shift ? size : 0);
+
+ tcg_gen_add_i64(tcg_addr, tcg_addr, tcg_rm);
+
+ if (is_vector) {
+ if (is_store) {
+ do_fp_st(s, rt, tcg_addr, size);
+ } else {
+ do_fp_ld(s, rt, tcg_addr, size);
+ }
+ } else {
+ TCGv_i64 tcg_rt = cpu_reg(s, rt);
+ if (is_store) {
+ do_gpr_st(s, tcg_rt, tcg_addr, size);
+ } else {
+ do_gpr_ld(s, tcg_rt, tcg_addr, size, is_signed, is_extended);
+ }
+ }
+}
+
+/*
* C3.3.13 Load/store (unsigned immediate)
*
* 31 30 29 27 26 25 24 23 22 21 10 9 5
@@ -981,7 +1119,11 @@ static void disas_ldst_reg(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 24, 2)) {
case 0:
- unsupported_encoding(s, insn);
+ if (extract32(insn, 21, 1) == 1 && extract32(insn, 10, 2) == 2) {
+ disas_ldst_reg_roffset(s, insn);
+ } else {
+ unsupported_encoding(s, insn);
+ }
break;
case 1:
disas_ldst_reg_unsigned_imm(s, insn);
--
1.8.5
next prev parent reply other threads:[~2013-12-13 19:26 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-13 19:17 [Qemu-devel] [PATCH v3 0/8] target-arm: A64 decoder set 3: loads, stores, misc integer Peter Maydell
2013-12-13 19:17 ` [Qemu-devel] [PATCH v3 1/8] target-arm: A64: add support for ld/st pair Peter Maydell
2013-12-13 19:17 ` [Qemu-devel] [PATCH v3 2/8] target-arm: A64: add support for ld/st unsigned imm Peter Maydell
2013-12-13 19:17 ` Peter Maydell [this message]
2013-12-13 19:17 ` [Qemu-devel] [PATCH v3 4/8] target-arm: A64: add support for ld/st with index Peter Maydell
2013-12-13 19:17 ` [Qemu-devel] [PATCH v3 5/8] target-arm: A64: add support for add, addi, sub, subi Peter Maydell
2013-12-16 10:11 ` C Fontana
2013-12-16 10:48 ` Peter Maydell
2013-12-13 19:18 ` [Qemu-devel] [PATCH v3 6/8] target-arm: A64: add support for move wide instructions Peter Maydell
2013-12-13 19:18 ` [Qemu-devel] [PATCH v3 7/8] target-arm: A64: add support for 3 src data proc insns Peter Maydell
2013-12-16 8:54 ` Claudio Fontana
2013-12-16 9:36 ` Peter Maydell
2013-12-16 10:49 ` Peter Maydell
2013-12-13 19:18 ` [Qemu-devel] [PATCH v3 8/8] target-arm: A64: implement SVC, BRK Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386962282-6839-4-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=christoffer.dall@linaro.org \
--cc=claudio.fontana@linaro.org \
--cc=dmueller@suse.de \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=laurent.desnogues@gmail.com \
--cc=matz@suse.de \
--cc=patches@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=will.newton@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).