From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 28/38] memory: make cpu_physical_memory_reset_dirty() take a length parameter
Date: Tue, 17 Dec 2013 16:26:04 +0100 [thread overview]
Message-ID: <1387293974-24718-29-git-send-email-quintela@redhat.com> (raw)
In-Reply-To: <1387293974-24718-1-git-send-email-quintela@redhat.com>
We have an end parameter in all the callers, and this make it coherent
with the rest of cpu_physical_memory_* functions, that also take a
length parameter.
Once here, move the start/end calculation to
tlb_reset_dirty_range_all() as we don't need it here anymore.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
cputlb.c | 3 +--
exec.c | 19 ++++++++-----------
include/exec/memory-internal.h | 2 +-
memory.c | 8 ++------
4 files changed, 12 insertions(+), 20 deletions(-)
diff --git a/cputlb.c b/cputlb.c
index 911d764..a5805e1 100644
--- a/cputlb.c
+++ b/cputlb.c
@@ -127,8 +127,7 @@ void tlb_flush_page(CPUArchState *env, target_ulong addr)
can be detected */
void tlb_protect_code(ram_addr_t ram_addr)
{
- cpu_physical_memory_reset_dirty(ram_addr,
- ram_addr + TARGET_PAGE_SIZE,
+ cpu_physical_memory_reset_dirty(ram_addr, TARGET_PAGE_SIZE,
DIRTY_MEMORY_CODE);
}
diff --git a/exec.c b/exec.c
index a2f89eb..ba5989c 100644
--- a/exec.c
+++ b/exec.c
@@ -723,11 +723,14 @@ found:
return block;
}
-static void tlb_reset_dirty_range_all(ram_addr_t start, ram_addr_t end,
- uintptr_t length)
+static void tlb_reset_dirty_range_all(ram_addr_t start, ram_addr_t length)
{
- RAMBlock *block;
ram_addr_t start1;
+ RAMBlock *block;
+ ram_addr_t end;
+
+ end = TARGET_PAGE_ALIGN(start + length);
+ start &= TARGET_PAGE_MASK;
block = qemu_get_ram_block(start);
assert(block == qemu_get_ram_block(end - 1));
@@ -736,21 +739,15 @@ static void tlb_reset_dirty_range_all(ram_addr_t start, ram_addr_t end,
}
/* Note: start and end must be within the same ram block. */
-void cpu_physical_memory_reset_dirty(ram_addr_t start, ram_addr_t end,
+void cpu_physical_memory_reset_dirty(ram_addr_t start, ram_addr_t length,
unsigned client)
{
- uintptr_t length;
-
- start &= TARGET_PAGE_MASK;
- end = TARGET_PAGE_ALIGN(end);
-
- length = end - start;
if (length == 0)
return;
cpu_physical_memory_clear_dirty_range(start, length, client);
if (tcg_enabled()) {
- tlb_reset_dirty_range_all(start, end, length);
+ tlb_reset_dirty_range_all(start, length);
}
}
diff --git a/include/exec/memory-internal.h b/include/exec/memory-internal.h
index 771b23f..cb2249f 100644
--- a/include/exec/memory-internal.h
+++ b/include/exec/memory-internal.h
@@ -102,7 +102,7 @@ static inline void cpu_physical_memory_clear_dirty_range(ram_addr_t start,
bitmap_clear(ram_list.dirty_memory[client], page, end - page);
}
-void cpu_physical_memory_reset_dirty(ram_addr_t start, ram_addr_t end,
+void cpu_physical_memory_reset_dirty(ram_addr_t start, ram_addr_t length,
unsigned client);
#endif
diff --git a/memory.c b/memory.c
index a490cbd..c010296 100644
--- a/memory.c
+++ b/memory.c
@@ -1191,9 +1191,7 @@ bool memory_region_test_and_clear_dirty(MemoryRegion *mr, hwaddr addr,
assert(mr->terminates);
ret = cpu_physical_memory_get_dirty(mr->ram_addr + addr, size, client);
if (ret) {
- cpu_physical_memory_reset_dirty(mr->ram_addr + addr,
- mr->ram_addr + addr + size,
- client);
+ cpu_physical_memory_reset_dirty(mr->ram_addr + addr, size, client);
}
return ret;
}
@@ -1239,9 +1237,7 @@ void memory_region_reset_dirty(MemoryRegion *mr, hwaddr addr,
hwaddr size, unsigned client)
{
assert(mr->terminates);
- cpu_physical_memory_reset_dirty(mr->ram_addr + addr,
- mr->ram_addr + addr + size,
- client);
+ cpu_physical_memory_reset_dirty(mr->ram_addr + addr, size, client);
}
void *memory_region_get_ram_ptr(MemoryRegion *mr)
--
1.8.3.1
next prev parent reply other threads:[~2013-12-17 15:27 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 15:25 [Qemu-devel] [PATCH v3 00/38] bitmap queue Juan Quintela
2013-12-17 15:25 ` [Qemu-devel] [PATCH 01/38] bitmap: use long as index Juan Quintela
2013-12-17 18:05 ` Eric Blake
2013-12-17 18:27 ` Stefan Weil
2013-12-17 20:21 ` Juan Quintela
2013-12-24 13:24 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 02/38] memory: cpu_physical_memory_set_dirty_flags() result is never used Juan Quintela
2013-12-17 15:25 ` [Qemu-devel] [PATCH 03/38] memory: cpu_physical_memory_set_dirty_range() return void Juan Quintela
2013-12-17 15:25 ` [Qemu-devel] [PATCH 04/38] exec: use accessor function to know if memory is dirty Juan Quintela
2013-12-17 15:25 ` [Qemu-devel] [PATCH 05/38] memory: create function to set a single dirty bit Juan Quintela
2013-12-17 15:25 ` [Qemu-devel] [PATCH 06/38] exec: create function to get " Juan Quintela
2013-12-17 15:25 ` [Qemu-devel] [PATCH 07/38] memory: make cpu_physical_memory_is_dirty return bool Juan Quintela
2013-12-18 10:08 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 08/38] memory: all users of cpu_physical_memory_get_dirty used only one flag Juan Quintela
2013-12-18 10:09 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 09/38] memory: set single dirty flags when possible Juan Quintela
2013-12-18 10:10 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 10/38] memory: cpu_physical_memory_set_dirty_range() always dirty all flags Juan Quintela
2013-12-18 10:12 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 11/38] memory: cpu_physical_memory_mask_dirty_range() always clears a single flag Juan Quintela
2013-12-18 10:14 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 12/38] memory: use bit 2 for migration Juan Quintela
2013-12-18 10:15 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 13/38] memory: make sure that client is always inside range Juan Quintela
2013-12-18 10:16 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 14/38] memory: only resize dirty bitmap when memory size increases Juan Quintela
2013-12-18 10:17 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 15/38] memory: cpu_physical_memory_clear_dirty_flag() result is never used Juan Quintela
2013-12-18 10:17 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 16/38] bitmap: Add bitmap_zero_extend operation Juan Quintela
2013-12-18 10:18 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 17/38] memory: split dirty bitmap into three Juan Quintela
2013-12-18 10:22 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 18/38] memory: unfold cpu_physical_memory_clear_dirty_flag() in its only user Juan Quintela
2013-12-18 10:28 ` Orit Wasserman
2013-12-18 10:36 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 19/38] memory: unfold cpu_physical_memory_set_dirty() " Juan Quintela
2013-12-18 10:28 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 20/38] memory: unfold cpu_physical_memory_set_dirty_flag() Juan Quintela
2013-12-18 10:29 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 21/38] memory: make cpu_physical_memory_get_dirty() the main function Juan Quintela
2013-12-18 10:30 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 22/38] memory: cpu_physical_memory_get_dirty() is used as returning a bool Juan Quintela
2013-12-18 10:33 ` Orit Wasserman
2013-12-17 15:25 ` [Qemu-devel] [PATCH 23/38] memory: s/mask/clear/ cpu_physical_memory_mask_dirty_range Juan Quintela
2013-12-18 10:38 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 24/38] memory: use find_next_bit() to find dirty bits Juan Quintela
2013-12-18 11:48 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 25/38] memory: cpu_physical_memory_set_dirty_range() now uses bitmap operations Juan Quintela
2013-12-18 11:50 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 26/38] memory: cpu_physical_memory_clear_dirty_range() " Juan Quintela
2013-12-18 11:50 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 27/38] memory: s/dirty/clean/ in cpu_physical_memory_is_dirty() Juan Quintela
2013-12-18 11:51 ` Orit Wasserman
2013-12-17 15:26 ` Juan Quintela [this message]
2013-12-18 11:53 ` [Qemu-devel] [PATCH 28/38] memory: make cpu_physical_memory_reset_dirty() take a length parameter Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 29/38] memory: cpu_physical_memory_set_dirty_tracking() should return void Juan Quintela
2013-12-18 11:54 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 30/38] memory: split cpu_physical_memory_* functions to its own include Juan Quintela
2013-12-18 12:12 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 31/38] memory: unfold memory_region_test_and_clear() Juan Quintela
2013-12-18 12:25 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 32/38] kvm: use directly cpu_physical_memory_* api for tracking dirty pages Juan Quintela
2013-12-19 10:03 ` Orit Wasserman
2013-12-19 10:06 ` Peter Maydell
2013-12-19 13:24 ` Juan Quintela
2013-12-17 15:26 ` [Qemu-devel] [PATCH 33/38] kvm: refactor start address calculation Juan Quintela
2013-12-19 10:04 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 34/38] memory: move bitmap synchronization to its own function Juan Quintela
2013-12-19 10:08 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 35/38] memory: syncronize kvm bitmap using bitmaps operations Juan Quintela
2013-12-19 10:25 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 36/38] ram: split function that synchronizes a range Juan Quintela
2013-12-19 10:45 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 37/38] migration: synchronize memory bitmap 64bits at a time Juan Quintela
2013-12-19 11:22 ` Orit Wasserman
2013-12-17 15:26 ` [Qemu-devel] [PATCH 38/38] ram: align ram_addr_t's regions in multiples of 64 Juan Quintela
2013-12-17 16:05 ` Juan Quintela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387293974-24718-29-git-send-email-quintela@redhat.com \
--to=quintela@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).