qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Anthony Liguori <aliguori@amazon.com>
Subject: [Qemu-devel] [PULL 08/18] block: vhdx - improve error message, and .bdrv_check implementation
Date: Fri, 20 Dec 2013 16:46:46 +0100	[thread overview]
Message-ID: <1387554416-5837-9-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1387554416-5837-1-git-send-email-stefanha@redhat.com>

From: Jeff Cody <jcody@redhat.com>

If there is a dirty log file to be replayed in a VHDX image, it is
replayed in .vhdx_open().  However, if the file is opened read-only,
then a somewhat cryptic error message results.

This adds a more helpful error message for the user.  If an image file
contains a log to be replayed, and is opened read-only, the user is
instructed to run 'qemu-img check -r all' on the image file.

Running qemu-img check -r all will cause the image file to be opened
r/w, which will replay the log file.  If a log file replay is detected,
this is flagged, and bdrv_check will increase the corruptions_fixed
count for the image.

[Fixed typo in error message that was pointed out by Eric Blake
<eblake@redhat.com>.
--Stefan]

Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 block/vhdx-log.c | 13 ++++++++++++-
 block/vhdx.c     | 22 ++++++++++++++++++++--
 block/vhdx.h     |  5 ++++-
 3 files changed, 36 insertions(+), 4 deletions(-)

diff --git a/block/vhdx-log.c b/block/vhdx-log.c
index ee5583c..8c9ae0d 100644
--- a/block/vhdx-log.c
+++ b/block/vhdx-log.c
@@ -706,7 +706,8 @@ exit:
  *
  * If read-only, we must replay the log in RAM (or refuse to open
  * a dirty VHDX file read-only) */
-int vhdx_parse_log(BlockDriverState *bs, BDRVVHDXState *s, bool *flushed)
+int vhdx_parse_log(BlockDriverState *bs, BDRVVHDXState *s, bool *flushed,
+                   Error **errp)
 {
     int ret = 0;
     VHDXHeader *hdr;
@@ -761,6 +762,16 @@ int vhdx_parse_log(BlockDriverState *bs, BDRVVHDXState *s, bool *flushed)
     }
 
     if (logs.valid) {
+        if (bs->read_only) {
+            ret = -EPERM;
+            error_setg_errno(errp, EPERM,
+                             "VHDX image file '%s' opened read-only, but "
+                             "contains a log that needs to be replayed.  To "
+                             "replay the log, execute:\n qemu-img check -r "
+                             "all '%s'",
+                             bs->filename, bs->filename);
+            goto exit;
+        }
         /* now flush the log */
         ret = vhdx_log_flush(bs, s, &logs);
         if (ret < 0) {
diff --git a/block/vhdx.c b/block/vhdx.c
index 67bbe10..1995778 100644
--- a/block/vhdx.c
+++ b/block/vhdx.c
@@ -878,7 +878,6 @@ static int vhdx_open(BlockDriverState *bs, QDict *options, int flags,
     int ret = 0;
     uint32_t i;
     uint64_t signature;
-    bool log_flushed = false;
 
 
     s->bat = NULL;
@@ -907,7 +906,7 @@ static int vhdx_open(BlockDriverState *bs, QDict *options, int flags,
         goto fail;
     }
 
-    ret = vhdx_parse_log(bs, s, &log_flushed);
+    ret = vhdx_parse_log(bs, s, &s->log_replayed_on_open, errp);
     if (ret < 0) {
         goto fail;
     }
@@ -1854,6 +1853,24 @@ exit:
     return ret;
 }
 
+/* If opened r/w, the VHDX driver will automatically replay the log,
+ * if one is present, inside the vhdx_open() call.
+ *
+ * If qemu-img check -r all is called, the image is automatically opened
+ * r/w and any log has already been replayed, so there is nothing (currently)
+ * for us to do here
+ */
+static int vhdx_check(BlockDriverState *bs, BdrvCheckResult *result,
+                       BdrvCheckMode fix)
+{
+    BDRVVHDXState *s = bs->opaque;
+
+    if (s->log_replayed_on_open) {
+        result->corruptions_fixed++;
+    }
+    return 0;
+}
+
 static QEMUOptionParameter vhdx_create_options[] = {
     {
         .name = BLOCK_OPT_SIZE,
@@ -1898,6 +1915,7 @@ static BlockDriver bdrv_vhdx = {
     .bdrv_co_writev         = vhdx_co_writev,
     .bdrv_create            = vhdx_create,
     .bdrv_get_info          = vhdx_get_info,
+    .bdrv_check             = vhdx_check,
 
     .create_options         = vhdx_create_options,
 };
diff --git a/block/vhdx.h b/block/vhdx.h
index 51183b2..2acd7c2 100644
--- a/block/vhdx.h
+++ b/block/vhdx.h
@@ -394,6 +394,8 @@ typedef struct BDRVVHDXState {
 
     Error *migration_blocker;
 
+    bool log_replayed_on_open;
+
     QLIST_HEAD(VHDXRegionHead, VHDXRegionEntry) regions;
 } BDRVVHDXState;
 
@@ -408,7 +410,8 @@ uint32_t vhdx_checksum_calc(uint32_t crc, uint8_t *buf, size_t size,
 
 bool vhdx_checksum_is_valid(uint8_t *buf, size_t size, int crc_offset);
 
-int vhdx_parse_log(BlockDriverState *bs, BDRVVHDXState *s, bool *flushed);
+int vhdx_parse_log(BlockDriverState *bs, BDRVVHDXState *s, bool *flushed,
+                   Error **errp);
 
 int vhdx_log_write_and_flush(BlockDriverState *bs, BDRVVHDXState *s,
                              void *data, uint32_t length, uint64_t offset);
-- 
1.8.4.2

  parent reply	other threads:[~2013-12-20 15:47 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-20 15:46 [Qemu-devel] [PULL 00/18] Block patches Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 01/18] sheepdog: fix dynamic grow for running qcow2 format Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 02/18] vring: create a common function to parse descriptors Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 03/18] vring: factor common code for error exits Stefan Hajnoczi
2014-01-13 10:18   ` Peter Maydell
2013-12-20 15:46 ` [Qemu-devel] [PULL 04/18] dataplane: change vring API to use VirtQueueElement Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 05/18] dataplane: replace hostmem with memory_region_find Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 06/18] qapi-schema: fix QEMU 1.8 references Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 07/18] block/iscsi: Fix compilation for libiscsi 1.4.0 (API change) Stefan Hajnoczi
2013-12-20 15:46 ` Stefan Hajnoczi [this message]
2013-12-20 15:46 ` [Qemu-devel] [PULL 09/18] docs: updated qemu-img man page and qemu-doc to reflect VHDX support Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 10/18] vmdk: Check VMFS extent line field number Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 11/18] vmdk: Allow vmdk_create to work with protocol Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 12/18] qemu-iotests: drop duplicate virtio-blk initialization failure Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 13/18] mirror: Don't close target Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 14/18] mirror: Move base to MirrorBlockJob Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 15/18] block: Add commit_active_start() Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 16/18] commit: Support commit active layer Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 17/18] qemu-iotests: Update test cases for commit active Stefan Hajnoczi
2013-12-20 15:46 ` [Qemu-devel] [PULL 18/18] commit: Remove unused check Stefan Hajnoczi
2014-01-10 17:29 ` [Qemu-devel] [PULL 00/18] Block patches Stefan Weil
2014-01-10 18:06   ` Paolo Bonzini
2014-01-10 18:37     ` Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1387554416-5837-9-git-send-email-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=aliguori@amazon.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).