qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: Anthony Liguori <aliguori@amazon.com>
Cc: Blue Swirl <blauwirbel@gmail.com>,
	qemu-devel@nongnu.org, Aurelien Jarno <aurelien@aurel32.net>
Subject: [Qemu-devel] [PULL 16/52] target-arm: Widen thread-local register state fields to 64 bits
Date: Mon,  6 Jan 2014 11:30:21 +0000	[thread overview]
Message-ID: <1389007857-14649-17-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1389007857-14649-1-git-send-email-peter.maydell@linaro.org>

The common pattern for system registers in a 64-bit capable ARM
CPU is that when in AArch32 the cp15 register is a view of the
bottom 32 bits of the 64-bit AArch64 system register; writes in
AArch32 leave the top half unchanged. The most natural way to
model this is to have the state field in the CPU struct be a
64 bit value, and simply have the AArch32 TCG code operate on
a pointer to its lower half.

For aarch64-linux-user the only registers we need to share like
this are the thread-local-storage ones. Widen their fields to
64 bits and provide the 64 bit reginfo struct to make them
visible in AArch64 state. Note that minor cleanup of the AArch64
system register encoding space means We can share the TPIDR_EL1
reginfo but need split encodings for TPIDR_EL0 and TPIDRRO_EL0.

Since we're touching almost every line in QEMU that uses the
c13_tls* fields in this patch anyway, we take the opportunity
to rename them in line with the standard ARM architectural names
for these registers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
 linux-user/aarch64/target_cpu.h |  5 ++++-
 linux-user/arm/target_cpu.h     |  2 +-
 linux-user/main.c               |  2 +-
 target-arm/cpu.h                | 18 +++++++++++++++---
 target-arm/helper.c             | 22 +++++++++++++++-------
 5 files changed, 36 insertions(+), 13 deletions(-)

diff --git a/linux-user/aarch64/target_cpu.h b/linux-user/aarch64/target_cpu.h
index 6f5539b..21560ef 100644
--- a/linux-user/aarch64/target_cpu.h
+++ b/linux-user/aarch64/target_cpu.h
@@ -29,7 +29,10 @@ static inline void cpu_clone_regs(CPUARMState *env, target_ulong newsp)
 
 static inline void cpu_set_tls(CPUARMState *env, target_ulong newtls)
 {
-    env->sr.tpidr_el0 = newtls;
+    /* Note that AArch64 Linux keeps the TLS pointer in TPIDR; this is
+     * different from AArch32 Linux, which uses TPIDRRO.
+     */
+    env->cp15.tpidr_el0 = newtls;
 }
 
 #endif
diff --git a/linux-user/arm/target_cpu.h b/linux-user/arm/target_cpu.h
index ed323c0..39d65b6 100644
--- a/linux-user/arm/target_cpu.h
+++ b/linux-user/arm/target_cpu.h
@@ -29,7 +29,7 @@ static inline void cpu_clone_regs(CPUARMState *env, target_ulong newsp)
 
 static inline void cpu_set_tls(CPUARMState *env, target_ulong newtls)
 {
-    env->cp15.c13_tls2 = newtls;
+    env->cp15.tpidrro_el0 = newtls;
 }
 
 #endif
diff --git a/linux-user/main.c b/linux-user/main.c
index 54f71fe..c0df8b5 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -566,7 +566,7 @@ do_kernel_trap(CPUARMState *env)
         end_exclusive();
         break;
     case 0xffff0fe0: /* __kernel_get_tls */
-        env->regs[0] = env->cp15.c13_tls2;
+        env->regs[0] = env->cp15.tpidrro_el0;
         break;
     case 0xffff0f60: /* __kernel_cmpxchg64 */
         arm_kernel_cmpxchg64_helper(env);
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index ab8ef17..fc36514 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -66,6 +66,18 @@
 /* ARM-specific interrupt pending bits.  */
 #define CPU_INTERRUPT_FIQ   CPU_INTERRUPT_TGT_EXT_1
 
+/* The usual mapping for an AArch64 system register to its AArch32
+ * counterpart is for the 32 bit world to have access to the lower
+ * half only (with writes leaving the upper half untouched). It's
+ * therefore useful to be able to pass TCG the offset of the least
+ * significant half of a uint64_t struct member.
+ */
+#ifdef HOST_WORDS_BIGENDIAN
+#define offsetoflow32(S, M) (offsetof(S, M + sizeof(uint32_t))
+#else
+#define offsetoflow32(S, M) offsetof(S, M)
+#endif
+
 /* Meanings of the ARMCPU object's two inbound GPIO lines */
 #define ARM_CPU_IRQ 0
 #define ARM_CPU_FIQ 1
@@ -188,9 +200,9 @@ typedef struct CPUARMState {
         uint32_t c12_vbar; /* vector base address register */
         uint32_t c13_fcse; /* FCSE PID.  */
         uint32_t c13_context; /* Context ID.  */
-        uint32_t c13_tls1; /* User RW Thread register.  */
-        uint32_t c13_tls2; /* User RO Thread register.  */
-        uint32_t c13_tls3; /* Privileged Thread register.  */
+        uint64_t tpidr_el0; /* User RW Thread register.  */
+        uint64_t tpidrro_el0; /* User RO Thread register.  */
+        uint64_t tpidr_el1; /* Privileged Thread register.  */
         uint32_t c14_cntfrq; /* Counter Frequency register */
         uint32_t c14_cntkctl; /* Timer Control register */
         ARMGenericTimer c14_timer[NUM_GTIMERS];
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 868493d..e7d88ea 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -740,18 +740,26 @@ static const ARMCPRegInfo t2ee_cp_reginfo[] = {
 };
 
 static const ARMCPRegInfo v6k_cp_reginfo[] = {
+    { .name = "TPIDR_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .opc2 = 2, .crn = 13, .crm = 0,
+      .access = PL0_RW,
+      .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el0), .resetvalue = 0 },
     { .name = "TPIDRURW", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 2,
       .access = PL0_RW,
-      .fieldoffset = offsetof(CPUARMState, cp15.c13_tls1),
-      .resetvalue = 0 },
+      .fieldoffset = offsetoflow32(CPUARMState, cp15.tpidr_el0),
+      .resetfn = arm_cp_reset_ignore },
+    { .name = "TPIDRRO_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .opc2 = 3, .crn = 13, .crm = 0,
+      .access = PL0_R|PL1_W,
+      .fieldoffset = offsetof(CPUARMState, cp15.tpidrro_el0), .resetvalue = 0 },
     { .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3,
       .access = PL0_R|PL1_W,
-      .fieldoffset = offsetof(CPUARMState, cp15.c13_tls2),
-      .resetvalue = 0 },
-    { .name = "TPIDRPRW", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 4,
+      .fieldoffset = offsetoflow32(CPUARMState, cp15.tpidrro_el0),
+      .resetfn = arm_cp_reset_ignore },
+    { .name = "TPIDR_EL1", .state = ARM_CP_STATE_BOTH,
+      .opc0 = 3, .opc1 = 0, .opc2 = 4, .crn = 13, .crm = 0,
       .access = PL1_RW,
-      .fieldoffset = offsetof(CPUARMState, cp15.c13_tls3),
-      .resetvalue = 0 },
+      .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el1), .resetvalue = 0 },
     REGINFO_SENTINEL
 };
 
-- 
1.8.5

  parent reply	other threads:[~2014-01-06 11:31 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-06 11:30 [Qemu-devel] [PULL 00/52] target-arm queue Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 01/52] target-arm: A64: add support for ld/st pair Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 02/52] target-arm: A64: add support for ld/st unsigned imm Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 03/52] target-arm: A64: add support for ld/st with reg offset Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 04/52] target-arm: A64: add support for ld/st with index Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 05/52] target-arm: A64: add support for add, addi, sub, subi Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 06/52] target-arm: A64: add support for move wide instructions Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 07/52] target-arm: A64: add support for 3 src data proc insns Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 08/52] target-arm: A64: implement SVC, BRK Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 09/52] target-arm: A64: Add decoder skeleton for FP instructions Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 10/52] target-arm: A64: implement FMOV Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 11/52] target-arm: Pull "add one cpreg to hashtable" into its own function Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 12/52] target-arm: Update generic cpreg code for AArch64 Peter Maydell
2014-01-07 19:14   ` Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 13/52] target-arm: Remove ARMCPU/CPUARMState from cpregs APIs used by decoder Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 14/52] target-arm: A64: Implement MRS/MSR/SYS/SYSL Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 15/52] target-arm: A64: Implement minimal set of EL0-visible sysregs Peter Maydell
2014-01-06 11:30 ` Peter Maydell [this message]
2014-01-06 11:30 ` [Qemu-devel] [PULL 17/52] target-arm: A64: add support for add/sub with carry Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 18/52] target-arm: A64: add support for conditional compare insns Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 19/52] target-arm: aarch64: add support for ld lit Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 20/52] target-arm: Widen exclusive-access support struct fields to 64 bits Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 21/52] target-arm: A64: support for ld/st/cl exclusive Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 22/52] linux-user: AArch64: define TARGET_CLONE_BACKWARDS Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 23/52] linux-user: AArch64: Use correct values for FPSR/FPCR in sigcontext Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 24/52] .travis.yml: Add aarch64-* targets Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 25/52] default-configs: Add config for aarch64-linux-user Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 26/52] target-arm: A64: Add support for dumping AArch64 VFP register state Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 27/52] target-arm: A64: Fix vector register access on bigendian hosts Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 28/52] target-arm: Use VFP_BINOP macro for min, max, minnum, maxnum Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 29/52] target-arm: A64: Add "Floating-point data-processing (2 source)" insns Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 30/52] target-arm: A64: Add "Floating-point data-processing (3 " Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 31/52] target-arm: A64: Add fmov (scalar, immediate) instruction Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 32/52] target-arm: A64: Add support for floating point compare Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 33/52] target-arm: A64: Add support for floating point conditional compare Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 34/52] target-arm: A64: Add support for floating point cond select Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 35/52] target-arm: Give the FPSCR rounding modes names Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 36/52] char/cadence_uart: Mark struct fields as public/private Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 37/52] char/cadence_uart: Add missing uart_update_state Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 38/52] char/cadence_uart: Fix reset Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 39/52] char/cadence_uart: s/r_fifo/rx_fifo Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 40/52] char/cadence_uart: Simplify status generation Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 41/52] char/cadence_uart: Define Missing SR/ISR fields Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 42/52] char/cadence_uart: Remove TX timer & add TX FIFO state Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 43/52] char/cadence_uart: Fix can_receive logic Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 44/52] char/cadence_uart: Use the TX fifo for transmission Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 45/52] char/cadence_uart: Delete redundant rx rst logic Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 46/52] char/cadence_uart: Implement Tx flow control Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 47/52] target-arm: use c13_context field for CONTEXTIDR Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 48/52] target-arm: remove raw_read|write duplication Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 49/52] arm/xilinx_zynq: Always instantiate the GEMs Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 50/52] target-arm: fix build with gcc 4.8.2 Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 51/52] arm_gic: Rename GIC_X_TRIGGER to GIC_X_EDGE_TRIGGER Peter Maydell
2014-01-06 11:30 ` [Qemu-devel] [PULL 52/52] hw: arm_gic: Introduce gic_set_priority function Peter Maydell
2014-01-07 19:17 ` [Qemu-devel] [PULL 00/52] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389007857-14649-17-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=aliguori@amazon.com \
    --cc=aurelien@aurel32.net \
    --cc=blauwirbel@gmail.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).