From: Tom Musta <tommusta@gmail.com>
To: qemu-devel@nongnu.org
Cc: Tom Musta <tommusta@gmail.com>, qemu-ppc@nongnu.org
Subject: [Qemu-devel] [V4 PATCH 09/22] target-ppc: Add ISA 2.06 stbcx. and sthcx. Instructions
Date: Tue, 7 Jan 2014 10:05:57 -0600 [thread overview]
Message-ID: <1389110770-5199-10-git-send-email-tommusta@gmail.com> (raw)
In-Reply-To: <1389110770-5199-1-git-send-email-tommusta@gmail.com>
This patch adds the byte and halfword variants of the Store Conditional
instructions. A common macro is introduced and the existing implementations
of stwcx. and stdcx. are refactored to use this macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <address@hidden>
---
V2: Re-implemented gen_conditional_store() and STCX macro per comments
from Richard.
V4: Using the newly added PPC2_ATOMIC_ISA206 flag. Fixes for tcg-debug
compilation errors.
target-ppc/translate.c | 91 +++++++++++++++++++++++-------------------------
1 files changed, 44 insertions(+), 47 deletions(-)
diff --git a/target-ppc/translate.c b/target-ppc/translate.c
index a0b5336..48ac5ec 100644
--- a/target-ppc/translate.c
+++ b/target-ppc/translate.c
@@ -3205,8 +3205,8 @@ LARX(lwarx, 4, ld32u);
#if defined(CONFIG_USER_ONLY)
-static void gen_conditional_store (DisasContext *ctx, TCGv EA,
- int reg, int size)
+static void gen_conditional_store(DisasContext *ctx, TCGv EA,
+ int reg, int size)
{
TCGv t0 = tcg_temp_new();
uint32_t save_exception = ctx->exception;
@@ -3220,62 +3220,57 @@ static void gen_conditional_store (DisasContext *ctx, TCGv EA,
gen_exception(ctx, POWERPC_EXCP_STCX);
ctx->exception = save_exception;
}
-#endif
-
-/* stwcx. */
-static void gen_stwcx_(DisasContext *ctx)
-{
- TCGv t0;
- gen_set_access_type(ctx, ACCESS_RES);
- t0 = tcg_temp_local_new();
- gen_addr_reg_index(ctx, t0);
- gen_check_align(ctx, t0, 0x03);
-#if defined(CONFIG_USER_ONLY)
- gen_conditional_store(ctx, t0, rS(ctx->opcode), 4);
#else
- {
- int l1;
+static void gen_conditional_store(DisasContext *ctx, TCGv EA,
+ int reg, int size)
+{
+ int l1;
- tcg_gen_trunc_tl_i32(cpu_crf[0], cpu_so);
- l1 = gen_new_label();
- tcg_gen_brcond_tl(TCG_COND_NE, t0, cpu_reserve, l1);
- tcg_gen_ori_i32(cpu_crf[0], cpu_crf[0], 1 << CRF_EQ);
- gen_qemu_st32(ctx, cpu_gpr[rS(ctx->opcode)], t0);
- gen_set_label(l1);
- tcg_gen_movi_tl(cpu_reserve, -1);
+ tcg_gen_trunc_tl_i32(cpu_crf[0], cpu_so);
+ l1 = gen_new_label();
+ tcg_gen_brcond_tl(TCG_COND_NE, EA, cpu_reserve, l1);
+ tcg_gen_ori_i32(cpu_crf[0], cpu_crf[0], 1 << CRF_EQ);
+#if defined(TARGET_PPC64)
+ if (size == 8) {
+ gen_qemu_st64(ctx, cpu_gpr[reg], EA);
+ } else
+#endif
+ if (size == 4) {
+ gen_qemu_st32(ctx, cpu_gpr[reg], EA);
+ } else if (size == 2) {
+ gen_qemu_st16(ctx, cpu_gpr[reg], EA);
+ } else {
+ gen_qemu_st8(ctx, cpu_gpr[reg], EA);
}
+ gen_set_label(l1);
+ tcg_gen_movi_tl(cpu_reserve, -1);
+}
#endif
- tcg_temp_free(t0);
+
+#define STCX(name, len) \
+static void gen_##name(DisasContext *ctx) \
+{ \
+ TCGv t0; \
+ gen_set_access_type(ctx, ACCESS_RES); \
+ t0 = tcg_temp_local_new(); \
+ gen_addr_reg_index(ctx, t0); \
+ if (len > 1) { \
+ gen_check_align(ctx, t0, (len)-1); \
+ } \
+ gen_conditional_store(ctx, t0, rS(ctx->opcode), len); \
+ tcg_temp_free(t0); \
}
+STCX(stbcx_, 1);
+STCX(sthcx_, 2);
+STCX(stwcx_, 4);
+
#if defined(TARGET_PPC64)
/* ldarx */
LARX(ldarx, 8, ld64);
/* stdcx. */
-static void gen_stdcx_(DisasContext *ctx)
-{
- TCGv t0;
- gen_set_access_type(ctx, ACCESS_RES);
- t0 = tcg_temp_local_new();
- gen_addr_reg_index(ctx, t0);
- gen_check_align(ctx, t0, 0x07);
-#if defined(CONFIG_USER_ONLY)
- gen_conditional_store(ctx, t0, rS(ctx->opcode), 8);
-#else
- {
- int l1;
- tcg_gen_trunc_tl_i32(cpu_crf[0], cpu_so);
- l1 = gen_new_label();
- tcg_gen_brcond_tl(TCG_COND_NE, t0, cpu_reserve, l1);
- tcg_gen_ori_i32(cpu_crf[0], cpu_crf[0], 1 << CRF_EQ);
- gen_qemu_st64(ctx, cpu_gpr[rS(ctx->opcode)], t0);
- gen_set_label(l1);
- tcg_gen_movi_tl(cpu_reserve, -1);
- }
-#endif
- tcg_temp_free(t0);
-}
+STCX(stdcx_, 8);
#endif /* defined(TARGET_PPC64) */
/* sync */
@@ -9415,6 +9410,8 @@ GEN_HANDLER(isync, 0x13, 0x16, 0x04, 0x03FFF801, PPC_MEM),
GEN_HANDLER_E(lbarx, 0x1F, 0x14, 0x01, 0, PPC_NONE, PPC2_ATOMIC_ISA206),
GEN_HANDLER_E(lharx, 0x1F, 0x14, 0x03, 0, PPC_NONE, PPC2_ATOMIC_ISA206),
GEN_HANDLER(lwarx, 0x1F, 0x14, 0x00, 0x00000000, PPC_RES),
+GEN_HANDLER_E(stbcx_, 0x1F, 0x16, 0x15, 0, PPC_NONE, PPC2_ATOMIC_ISA206),
+GEN_HANDLER_E(sthcx_, 0x1F, 0x16, 0x16, 0, PPC_NONE, PPC2_ATOMIC_ISA206),
GEN_HANDLER2(stwcx_, "stwcx.", 0x1F, 0x16, 0x04, 0x00000000, PPC_RES),
#if defined(TARGET_PPC64)
GEN_HANDLER(ldarx, 0x1F, 0x14, 0x02, 0x00000000, PPC_64B),
--
1.7.1
next prev parent reply other threads:[~2014-01-07 16:07 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-07 16:05 [Qemu-devel] [V4 PATCH 00/22] target-ppc: Base ISA V2.06 for Power7/Power8 Tom Musta
2014-01-07 16:05 ` [Qemu-devel] [V4 PATCH 01/22] target-ppc: Add ISA2.06 bpermd Instruction Tom Musta
2014-01-07 16:05 ` [Qemu-devel] [V4 PATCH 02/22] target-ppc: Add Flag for ISA2.06 Divide Extended Instructions Tom Musta
2014-01-08 18:27 ` Richard Henderson
2014-01-07 16:05 ` [Qemu-devel] [V4 PATCH 03/22] target-ppc: Add ISA2.06 divdeu[o] Instructions Tom Musta
2014-01-07 16:05 ` [Qemu-devel] [V4 PATCH 04/22] target-ppc: Add ISA2.06 divde[o] Instructions Tom Musta
2014-01-07 16:05 ` [Qemu-devel] [V4 PATCH 05/22] target-ppc: Add ISA 2.06 divweu[o] Instructions Tom Musta
2014-01-08 18:26 ` Richard Henderson
2014-01-07 16:05 ` [Qemu-devel] [V4 PATCH 06/22] target-ppc: Add ISA 2.06 divwe[o] Instructions Tom Musta
2014-01-08 18:28 ` Richard Henderson
2014-01-07 16:05 ` [Qemu-devel] [V4 PATCH 07/22] target-ppc: Add Flag for ISA2.06 Atomic Instructions Tom Musta
2014-01-08 18:28 ` Richard Henderson
2014-01-07 16:05 ` [Qemu-devel] [V4 PATCH 08/22] target-ppc: Add ISA2.06 lbarx, lharx Instructions Tom Musta
2014-01-07 16:05 ` Tom Musta [this message]
2014-01-07 16:05 ` [Qemu-devel] [V4 PATCH 10/22] target-ppc: Add Flag for ISA V2.06 Floating Point Conversion Tom Musta
2014-01-08 18:29 ` Richard Henderson
2014-01-07 16:05 ` [Qemu-devel] [V4 PATCH 11/22] target-ppc: Add ISA2.06 Float to Integer Instructions Tom Musta
2014-01-07 16:06 ` [Qemu-devel] [V4 PATCH 12/22] target-ppc: Add ISA 2.06 fcfid[u][s] Instructions Tom Musta
2014-01-08 18:31 ` Richard Henderson
2014-01-07 16:06 ` [Qemu-devel] [V4 PATCH 13/22] softfloat: Fix exception flag handling for float32_to_float16() Tom Musta
2014-01-07 16:06 ` [Qemu-devel] [V4 PATCH 14/22] softfloat: Factor out RoundAndPackFloat16 and NormalizeFloat16Subnormal Tom Musta
2014-01-07 16:06 ` [Qemu-devel] [V4 PATCH 15/22] softfloat: Refactor code handling various rounding modes Tom Musta
2014-01-07 16:06 ` [Qemu-devel] [V4 PATCH 16/22] softfloat: Add support for ties-away rounding Tom Musta
2014-01-07 16:06 ` [Qemu-devel] [V4 PATCH 17/22] target-ppc: Fix and enable fri[mnpz] Tom Musta
2014-01-08 18:32 ` Richard Henderson
2014-02-21 11:58 ` [Qemu-devel] [Qemu-ppc] " Alexander Graf
2014-02-21 12:48 ` Tom Musta
2014-01-07 16:06 ` [Qemu-devel] [V4 PATCH 18/22] target-ppc: Add Flag for Power ISA V2.06 Floating Point Test Instructions Tom Musta
2014-01-08 18:33 ` Richard Henderson
2014-01-07 16:06 ` [Qemu-devel] [V4 PATCH 19/22] target-ppc: Add ISA 2.06 ftdiv Instruction Tom Musta
2014-01-08 18:34 ` Richard Henderson
2014-01-07 16:06 ` [Qemu-devel] [V4 PATCH 20/22] target-ppc: Add ISA 2.06 ftsqrt Tom Musta
2014-01-08 18:35 ` Richard Henderson
2014-01-07 16:06 ` [Qemu-devel] [V4 PATCH 21/22] target-ppc: Enable frsqrtes on Power7 and Power8 Tom Musta
2014-01-07 16:06 ` [Qemu-devel] [V4 PATCH 22/22] target-ppc: Add ISA2.06 lfiwzx Instruction Tom Musta
2014-01-27 16:01 ` [Qemu-devel] [Qemu-ppc] [V4 PATCH 00/22] target-ppc: Base ISA V2.06 for Power7/Power8 Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389110770-5199-10-git-send-email-tommusta@gmail.com \
--to=tommusta@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).