qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 09/42] sheepdog: fix clone operation by 'qemu-img create -b'
Date: Wed, 15 Jan 2014 11:22:22 +0100	[thread overview]
Message-ID: <1389781375-11774-10-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1389781375-11774-1-git-send-email-kwolf@redhat.com>

From: Liu Yuan <namei.unix@gmail.com>

We should pass base_inode->vdi_id to base_vdi_id of SheepdogVdiReq so that sheep
can create a clone instead a fresh volume.

This fixes following command:

qemu-create -b sheepdog:base sheepdog:clone

so users can boot sheepdog:clone as a normal volume.

Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/sheepdog.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/block/sheepdog.c b/block/sheepdog.c
index b94ab6e..6088fa5 100644
--- a/block/sheepdog.c
+++ b/block/sheepdog.c
@@ -161,7 +161,7 @@ typedef struct SheepdogVdiReq {
     uint32_t id;
     uint32_t data_length;
     uint64_t vdi_size;
-    uint32_t vdi_id;
+    uint32_t base_vdi_id;
     uint8_t copies;
     uint8_t copy_policy;
     uint8_t reserved[2];
@@ -1493,7 +1493,7 @@ static int do_sd_create(BDRVSheepdogState *s, uint32_t *vdi_id, int snapshot)
 
     memset(&hdr, 0, sizeof(hdr));
     hdr.opcode = SD_OP_NEW_VDI;
-    hdr.vdi_id = s->inode.vdi_id;
+    hdr.base_vdi_id = s->inode.vdi_id;
 
     wlen = SD_MAX_VDI_LEN;
 
@@ -1684,7 +1684,7 @@ static int sd_create(const char *filename, QEMUOptionParameter *options,
 
     if (backing_file) {
         BlockDriverState *bs;
-        BDRVSheepdogState *s;
+        BDRVSheepdogState *base;
         BlockDriver *drv;
 
         /* Currently, only Sheepdog backing image is supported. */
@@ -1702,15 +1702,15 @@ static int sd_create(const char *filename, QEMUOptionParameter *options,
             goto out;
         }
 
-        s = bs->opaque;
+        base = bs->opaque;
 
-        if (!is_snapshot(&s->inode)) {
+        if (!is_snapshot(&base->inode)) {
             error_report("cannot clone from a non snapshot vdi");
             bdrv_unref(bs);
             ret = -EINVAL;
             goto out;
         }
-
+        s->inode.vdi_id = base->inode.vdi_id;
         bdrv_unref(bs);
     }
 
@@ -1743,7 +1743,7 @@ static void sd_close(BlockDriverState *bs)
     memset(&hdr, 0, sizeof(hdr));
 
     hdr.opcode = SD_OP_RELEASE_VDI;
-    hdr.vdi_id = s->inode.vdi_id;
+    hdr.base_vdi_id = s->inode.vdi_id;
     wlen = strlen(s->name) + 1;
     hdr.data_length = wlen;
     hdr.flags = SD_FLAG_CMD_WRITE;
@@ -1846,7 +1846,7 @@ static bool sd_delete(BDRVSheepdogState *s)
     unsigned int wlen = SD_MAX_VDI_LEN, rlen = 0;
     SheepdogVdiReq hdr = {
         .opcode = SD_OP_DEL_VDI,
-        .vdi_id = s->inode.vdi_id,
+        .base_vdi_id = s->inode.vdi_id,
         .data_length = wlen,
         .flags = SD_FLAG_CMD_WRITE,
     };
-- 
1.8.1.4

  parent reply	other threads:[~2014-01-15 10:23 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-15 10:22 [Qemu-devel] [PULL 00/42] Block patches Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 01/42] rbd: switch from pipe to QEMUBH completion notification Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 02/42] qemu-iotests: Introduce _unsupported_imgopts Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 03/42] qemu-iotests: Add _unsupported_imgopts for vmdk subformats Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 04/42] qemu-iotests: Clean up all extents for vmdk Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 05/42] block/iscsi: return -ENOMEM if an async call fails immediately Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 06/42] gluster: Convert aio routines into coroutines Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 07/42] gluster: Implement .bdrv_co_write_zeroes for gluster Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 08/42] gluster: Add support for creating zero-filled image Kevin Wolf
2014-01-15 10:22 ` Kevin Wolf [this message]
2014-01-15 10:22 ` [Qemu-devel] [PULL 10/42] qtest: Fix the bug about disable vnc causes "make check" fail Kevin Wolf
2014-01-17 15:06   ` Andreas Färber
2014-01-18 11:54     ` Kewei Yu
2014-01-26  0:06       ` Andreas Färber
2014-01-26  8:04         ` Kewei Yu
2014-01-15 10:22 ` [Qemu-devel] [PULL 11/42] docs: qcow2 compat=1.1 is now the default Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 12/42] vmdk: Fix big flat extent IO Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 13/42] readline: decouple readline from the monitor Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 14/42] readline: move readline to a generic location Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 15/42] osdep: add qemu_set_tty_echo() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 16/42] qemu-io: use readline.c Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 17/42] qemu-io: add command completion Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 18/42] blkdebug: Use errp for read_config() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 19/42] blkdebug: Don't require sophisticated filename Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 20/42] qdict: Add qdict_array_split() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 21/42] qapi: extend qdict_flatten() for QLists Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 22/42] qemu-option: Add qemu_config_parse_qdict() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 23/42] blkdebug: Always call read_config() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 24/42] blkdebug: Use command-line in read_config() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 25/42] block: Allow reference for bdrv_file_open() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 26/42] block: Pass reference to bdrv_file_open() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 27/42] block: Allow block devices without files Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 28/42] block: Add bdrv_open_image() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 29/42] block: Use bdrv_open_image() in bdrv_open() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 30/42] block: Allow recursive "file"s Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 31/42] blockdev: Move "file" to legacy_opts Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 32/42] blkdebug: Allow command-line file configuration Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 33/42] blkverify: Allow command-line configuration Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 34/42] blkverify: Don't require protocol filename Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 35/42] qapi: Add "errno" to the list of polluted words Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 36/42] qapi: QMP interface for blkdebug and blkverify Kevin Wolf
2014-01-15 15:19   ` Eric Blake
2014-01-15 17:11     ` Paolo Bonzini
2014-01-16 10:03     ` Kevin Wolf
2014-01-17 15:01       ` Andreas Färber
2014-01-15 10:22 ` [Qemu-devel] [PULL 37/42] qemu-io: Make filename optional Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 38/42] tests: Add test for qdict_array_split() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 39/42] tests: Add test for qdict_flatten() Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 40/42] iotests: Test new blkdebug/blkverify interface Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 41/42] iotests: Test file format nesting Kevin Wolf
2014-01-15 10:22 ` [Qemu-devel] [PULL 42/42] block: fix backing file segfault Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389781375-11774-10-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=anthony@codemonkey.ws \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).