qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Graf <agraf@suse.de>
To: qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org
Subject: [Qemu-devel] [PATCH 07/10] PPC: guts: Add emulation of a few more registers
Date: Mon, 20 Jan 2014 00:44:34 +0100	[thread overview]
Message-ID: <1390175077-5717-8-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1390175077-5717-1-git-send-email-agraf@suse.de>

The GUTS device is used by system software to find out about hardware
details of the current system.

We only emulate the bare minimum to be able to reboot a guest which is
not sufficient to make u-boot happy.

Add a few more registers to our portfolio with dummy values.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 hw/ppc/mpc8544_guts.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/hw/ppc/mpc8544_guts.c b/hw/ppc/mpc8544_guts.c
index a10abe9..af8c742 100644
--- a/hw/ppc/mpc8544_guts.c
+++ b/hw/ppc/mpc8544_guts.c
@@ -25,6 +25,8 @@
 #define MPC8544_GUTS_RSTCR_RESET      0x02
 
 #define MPC8544_GUTS_ADDR_PORPLLSR    0x00
+#define PORPLLSR_SYS_RATIO_MAX        0x3e
+#define PORPLLSR_CPU0_RATIO_MAX       (0x3f << 16)
 #define MPC8544_GUTS_ADDR_PORBMSR     0x04
 #define MPC8544_GUTS_ADDR_PORIMPSCR   0x08
 #define MPC8544_GUTS_ADDR_PORDEVSR    0x0C
@@ -36,6 +38,7 @@
 #define MPC8544_GUTS_ADDR_GPINDR      0x50
 #define MPC8544_GUTS_ADDR_PMUXCR      0x60
 #define MPC8544_GUTS_ADDR_DEVDISR     0x70
+#define DEVDISR_DISABLED_NONE         0x0
 #define MPC8544_GUTS_ADDR_POWMGTCSR   0x80
 #define MPC8544_GUTS_ADDR_MCPSUMR     0x90
 #define MPC8544_GUTS_ADDR_RSTRSCR     0x94
@@ -73,6 +76,15 @@ static uint64_t mpc8544_guts_read(void *opaque, hwaddr addr,
 
     addr &= MPC8544_GUTS_MMIO_SIZE - 1;
     switch (addr) {
+    case MPC8544_GUTS_ADDR_PORPLLSR:
+        value = PORPLLSR_SYS_RATIO_MAX | PORPLLSR_CPU0_RATIO_MAX;
+        break;
+    case MPC8544_GUTS_ADDR_PORDEVSR:
+        value = 0;
+        break;
+    case MPC8544_GUTS_ADDR_DEVDISR:
+        value = DEVDISR_DISABLED_NONE;
+        break;
     case MPC8544_GUTS_ADDR_PVR:
         value = env->spr[SPR_PVR];
         break;
-- 
1.8.1.4

  parent reply	other threads:[~2014-01-19 23:44 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-19 23:44 [Qemu-devel] [PATCH 00/10] PPC: e500: Use u-boot as firmware Alexander Graf
2014-01-19 23:44 ` [Qemu-devel] [PATCH 01/10] PPC: Make all e500 CPUs SVR aware Alexander Graf
2014-01-19 23:44 ` [Qemu-devel] [PATCH 02/10] PPC: Add definitions for GIVORs Alexander Graf
2014-01-19 23:44 ` [Qemu-devel] [PATCH 03/10] PPC: Add stub emulation for HDBCR0 Alexander Graf
2014-01-19 23:44 ` [Qemu-devel] [PATCH 04/10] PPC: Add L1CFG1 SPR emulation Alexander Graf
2014-01-23  0:15   ` [Qemu-devel] [Qemu-ppc] " Scott Wood
2014-01-19 23:44 ` [Qemu-devel] [PATCH 05/10] PPC: Properly emulate L1CSR0 and L1CSR1 Alexander Graf
2014-01-19 23:44 ` [Qemu-devel] [PATCH 06/10] PPC: Add dcbtls emulation Alexander Graf
2014-01-19 23:44 ` Alexander Graf [this message]
2014-01-23  0:08   ` [Qemu-devel] [Qemu-ppc] [PATCH 07/10] PPC: guts: Add emulation of a few more registers Scott Wood
2014-01-23 11:34     ` Alexander Graf
2014-01-23 21:22       ` Scott Wood
2014-01-19 23:44 ` [Qemu-devel] [PATCH 08/10] PPC: e500: Expose kernel load address in dt Alexander Graf
2014-01-19 23:44 ` [Qemu-devel] [PATCH 09/10] PPC: Add u-boot firmware for e500 Alexander Graf
2014-01-20  0:17   ` Peter Maydell
2014-01-20 10:04     ` Alexander Graf
2014-01-23  0:13       ` Scott Wood
2014-01-19 23:44 ` [Qemu-devel] [PATCH 10/10] PPC: e500: Move to u-boot as firmware Alexander Graf
2014-01-23  0:23   ` Scott Wood
2014-01-23 10:40     ` Alexander Graf
2014-01-23 22:22       ` Scott Wood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1390175077-5717-8-git-send-email-agraf@suse.de \
    --to=agraf@suse.de \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).