From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Marcel Apfelbaum <marcel.a@redhat.com>
Subject: [Qemu-devel] [PULL 07/29] acpi unit-test: compare DSDT and SSDT tables against expected values
Date: Mon, 20 Jan 2014 16:09:46 +0200 [thread overview]
Message-ID: <1390226872-781-8-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1390226872-781-1-git-send-email-mst@redhat.com>
From: Marcel Apfelbaum <marcel.a@redhat.com>
This test will run only if iasl is installed on the host machine.
The test plan:
1. Dumps the ACPI tables as AML on the disk.
2. Runs iasl to disassembly the tables into ASL files.
3. Runs iasl to disassembly the offline AML files into ASL files.
4. Compares the ASL files.
The test runs for both default machine and q35.
In case the test fails, it can be easily tweaked to
show the differences between the ASL files and
understand the issue.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
tests/acpi-test.c | 261 +++++++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 240 insertions(+), 21 deletions(-)
diff --git a/tests/acpi-test.c b/tests/acpi-test.c
index df1af83..c3fc603 100644
--- a/tests/acpi-test.c
+++ b/tests/acpi-test.c
@@ -18,14 +18,22 @@
#include "qemu/compiler.h"
#include "hw/i386/acpi-defs.h"
+#define MACHINE_PC "pc"
+#define MACHINE_Q35 "q35"
+
/* DSDT and SSDTs format */
typedef struct {
AcpiTableHeader header;
- uint8_t *aml;
- int aml_len;
-} AcpiSdtTable;
+ gchar *aml; /* aml bytecode from guest */
+ gsize aml_len;
+ gchar *aml_file;
+ gchar *asl; /* asl code generated from aml */
+ gsize asl_len;
+ gchar *asl_file;
+} QEMU_PACKED AcpiSdtTable;
typedef struct {
+ const char *machine;
uint32_t rsdp_addr;
AcpiRsdpDescriptor rsdp_table;
AcpiRsdtDescriptorRev1 rsdt_table;
@@ -33,8 +41,7 @@ typedef struct {
AcpiFacsDescriptorRev1 facs_table;
uint32_t *rsdt_tables_addr;
int rsdt_tables_nr;
- AcpiSdtTable dsdt_table;
- GArray *ssdt_tables;
+ GArray *ssdt_tables; /* first is DSDT */
} test_data;
#define LOW(x) ((x) & 0xff)
@@ -91,8 +98,10 @@ typedef struct {
/* Boot sector code: write SIGNATURE into memory,
* then halt.
+ * Q35 machine requires a minimum 0x7e000 bytes disk.
+ * (bug or feature?)
*/
-static uint8_t boot_sector[0x200] = {
+static uint8_t boot_sector[0x7e000] = {
/* 7c00: mov $0xdead,%ax */
[0x00] = 0xb8,
[0x01] = LOW(SIGNATURE),
@@ -117,17 +126,40 @@ static uint8_t boot_sector[0x200] = {
};
static const char *disk = "tests/acpi-test-disk.raw";
+static const char *data_dir = "tests/acpi-test-data";
static void free_test_data(test_data *data)
{
+ AcpiSdtTable *temp;
int i;
- g_free(data->rsdt_tables_addr);
+ if (data->rsdt_tables_addr) {
+ g_free(data->rsdt_tables_addr);
+ }
+
for (i = 0; i < data->ssdt_tables->len; ++i) {
- g_free(g_array_index(data->ssdt_tables, AcpiSdtTable, i).aml);
+ temp = &g_array_index(data->ssdt_tables, AcpiSdtTable, i);
+ if (temp->aml) {
+ g_free(temp->aml);
+ }
+ if (temp->aml_file) {
+ if (g_strstr_len(temp->aml_file, -1, "aml-")) {
+ unlink(temp->aml_file);
+ }
+ g_free(temp->aml_file);
+ }
+ if (temp->asl) {
+ g_free(temp->asl);
+ }
+ if (temp->asl_file) {
+ if (g_strstr_len(temp->asl_file, -1, "asl-")) {
+ unlink(temp->asl_file);
+ }
+ g_free(temp->asl_file);
+ }
}
+
g_array_free(data->ssdt_tables, false);
- g_free(data->dsdt_table.aml);
}
static uint8_t acpi_checksum(const uint8_t *data, int len)
@@ -292,34 +324,207 @@ static void test_dst_table(AcpiSdtTable *sdt_table, uint32_t addr)
ACPI_READ_ARRAY_PTR(sdt_table->aml, sdt_table->aml_len, addr);
checksum = acpi_checksum((uint8_t *)sdt_table, sizeof(AcpiTableHeader)) +
- acpi_checksum(sdt_table->aml, sdt_table->aml_len);
+ acpi_checksum((uint8_t *)sdt_table->aml, sdt_table->aml_len);
g_assert(!checksum);
}
static void test_acpi_dsdt_table(test_data *data)
{
- AcpiSdtTable *dsdt_table = &data->dsdt_table;
+ AcpiSdtTable dsdt_table;
uint32_t addr = data->fadt_table.dsdt;
- test_dst_table(dsdt_table, addr);
- g_assert_cmphex(dsdt_table->header.signature, ==, ACPI_DSDT_SIGNATURE);
+ memset(&dsdt_table, 0, sizeof(dsdt_table));
+ data->ssdt_tables = g_array_new(false, true, sizeof(AcpiSdtTable));
+
+ test_dst_table(&dsdt_table, addr);
+ g_assert_cmphex(dsdt_table.header.signature, ==, ACPI_DSDT_SIGNATURE);
+
+ /* Place DSDT first */
+ g_array_append_val(data->ssdt_tables, dsdt_table);
}
static void test_acpi_ssdt_tables(test_data *data)
{
- GArray *ssdt_tables;
int ssdt_tables_nr = data->rsdt_tables_nr - 1; /* fadt is first */
int i;
- ssdt_tables = g_array_sized_new(false, true, sizeof(AcpiSdtTable),
- ssdt_tables_nr);
for (i = 0; i < ssdt_tables_nr; i++) {
AcpiSdtTable ssdt_table;
+
+ memset(&ssdt_table, 0 , sizeof(ssdt_table));
uint32_t addr = data->rsdt_tables_addr[i + 1]; /* fadt is first */
test_dst_table(&ssdt_table, addr);
- g_array_append_val(ssdt_tables, ssdt_table);
+ g_array_append_val(data->ssdt_tables, ssdt_table);
}
- data->ssdt_tables = ssdt_tables;
+}
+
+static bool iasl_installed(void)
+{
+ gchar *out = NULL, *out_err = NULL;
+ bool ret;
+
+ /* pass 'out' and 'out_err' in order to be redirected */
+ ret = g_spawn_command_line_sync("iasl", &out, &out_err, NULL, NULL);
+
+ if (out_err) {
+ ret = ret && (out_err[0] == '\0');
+ g_free(out_err);
+ }
+
+ if (out) {
+ g_free(out);
+ }
+
+ return ret;
+}
+
+static void dump_aml_files(test_data *data)
+{
+ AcpiSdtTable *sdt;
+ GError *error = NULL;
+ gint fd;
+ ssize_t ret;
+ int i;
+
+ for (i = 0; i < data->ssdt_tables->len; ++i) {
+ sdt = &g_array_index(data->ssdt_tables, AcpiSdtTable, i);
+ g_assert(sdt->aml);
+
+ fd = g_file_open_tmp("aml-XXXXXX", &sdt->aml_file, &error);
+ g_assert_no_error(error);
+
+ ret = qemu_write_full(fd, sdt, sizeof(AcpiTableHeader));
+ g_assert(ret == sizeof(AcpiTableHeader));
+ ret = qemu_write_full(fd, sdt->aml, sdt->aml_len);
+ g_assert(ret == sdt->aml_len);
+
+ close(fd);
+ }
+}
+
+static void load_asl(GArray *sdts, AcpiSdtTable *sdt)
+{
+ AcpiSdtTable *temp;
+ GError *error = NULL;
+ GString *command_line = g_string_new("'iasl' ");
+ gint fd;
+ gchar *out, *out_err;
+ gboolean ret;
+ int i;
+
+ fd = g_file_open_tmp("asl-XXXXXX.dsl", &sdt->asl_file, &error);
+ g_assert_no_error(error);
+ close(fd);
+
+ /* build command line */
+ g_string_append_printf(command_line, "-p %s ", sdt->asl_file);
+ for (i = 0; i < 2; ++i) { /* reference DSDT and SSDT */
+ temp = &g_array_index(sdts, AcpiSdtTable, i);
+ g_string_append_printf(command_line, "-e %s ", temp->aml_file);
+ }
+ g_string_append_printf(command_line, "-d %s", sdt->aml_file);
+
+ /* pass 'out' and 'out_err' in order to be redirected */
+ g_spawn_command_line_sync(command_line->str, &out, &out_err, NULL, &error);
+ g_assert_no_error(error);
+
+ ret = g_file_get_contents(sdt->asl_file, (gchar **)&sdt->asl,
+ &sdt->asl_len, &error);
+ g_assert(ret);
+ g_assert_no_error(error);
+ g_assert(sdt->asl_len);
+
+ g_free(out);
+ g_free(out_err);
+ g_string_free(command_line, true);
+}
+
+#define COMMENT_END "*/"
+#define DEF_BLOCK "DefinitionBlock ("
+#define BLOCK_NAME_END ".aml"
+
+static GString *normalize_asl(gchar *asl_code)
+{
+ GString *asl = g_string_new(asl_code);
+ gchar *comment, *block_name;
+
+ /* strip comments (different generation days) */
+ comment = g_strstr_len(asl->str, asl->len, COMMENT_END);
+ if (comment) {
+ asl = g_string_erase(asl, 0, comment + sizeof(COMMENT_END) - asl->str);
+ }
+
+ /* strip def block name (it has file path in it) */
+ if (g_str_has_prefix(asl->str, DEF_BLOCK)) {
+ block_name = g_strstr_len(asl->str, asl->len, BLOCK_NAME_END);
+ g_assert(block_name);
+ asl = g_string_erase(asl, 0,
+ block_name + sizeof(BLOCK_NAME_END) - asl->str);
+ }
+
+ return asl;
+}
+
+static GArray *load_expected_aml(test_data *data)
+{
+ int i;
+ AcpiSdtTable *sdt;
+ gchar *aml_file;
+ GError *error = NULL;
+ gboolean ret;
+
+ GArray *exp_ssdt_tables = g_array_new(false, true, sizeof(AcpiSdtTable));
+ for (i = 0; i < data->ssdt_tables->len; ++i) {
+ AcpiSdtTable exp_sdt;
+ sdt = &g_array_index(data->ssdt_tables, AcpiSdtTable, i);
+
+ memset(&exp_sdt, 0, sizeof(exp_sdt));
+ exp_sdt.header.signature = sdt->header.signature;
+
+ aml_file = g_strdup_printf("%s/%s/%.4s", data_dir, data->machine,
+ (gchar *)&exp_sdt.header.signature);
+ exp_sdt.aml_file = aml_file;
+ g_assert(g_file_test(aml_file, G_FILE_TEST_EXISTS));
+ ret = g_file_get_contents(aml_file, &exp_sdt.aml,
+ &exp_sdt.aml_len, &error);
+ g_assert(ret);
+ g_assert_no_error(error);
+ g_assert(exp_sdt.aml);
+ g_assert(exp_sdt.aml_len);
+
+ g_array_append_val(exp_ssdt_tables, exp_sdt);
+ }
+
+ return exp_ssdt_tables;
+}
+
+static void test_acpi_asl(test_data *data)
+{
+ int i;
+ AcpiSdtTable *sdt, *exp_sdt;
+ test_data exp_data;
+
+ memset(&exp_data, 0, sizeof(exp_data));
+ exp_data.ssdt_tables = load_expected_aml(data);
+ dump_aml_files(data);
+ for (i = 0; i < data->ssdt_tables->len; ++i) {
+ GString *asl, *exp_asl;
+
+ sdt = &g_array_index(data->ssdt_tables, AcpiSdtTable, i);
+ exp_sdt = &g_array_index(exp_data.ssdt_tables, AcpiSdtTable, i);
+
+ load_asl(data->ssdt_tables, sdt);
+ asl = normalize_asl(sdt->asl);
+
+ load_asl(exp_data.ssdt_tables, exp_sdt);
+ exp_asl = normalize_asl(exp_sdt->asl);
+
+ g_assert(!g_strcmp0(asl->str, exp_asl->str));
+ g_string_free(asl, true);
+ g_string_free(exp_asl, true);
+ }
+
+ free_test_data(&exp_data);
}
static void test_acpi_one(const char *params, test_data *data)
@@ -329,10 +534,14 @@ static void test_acpi_one(const char *params, test_data *data)
uint8_t signature_high;
uint16_t signature;
int i;
+ const char *device = "";
- memset(data, 0, sizeof(*data));
- args = g_strdup_printf("-net none -display none %s %s",
- params ? params : "", disk);
+ if (!g_strcmp0(data->machine, MACHINE_Q35)) {
+ device = ",id=hd -device ide-hd,drive=hd";
+ }
+
+ args = g_strdup_printf("-net none -display none %s -drive file=%s%s,",
+ params ? params : "", disk, device);
qtest_start(args);
/* Wait at most 1 minute */
@@ -362,6 +571,10 @@ static void test_acpi_one(const char *params, test_data *data)
test_acpi_dsdt_table(data);
test_acpi_ssdt_tables(data);
+ if (iasl_installed()) {
+ test_acpi_asl(data);
+ }
+
qtest_quit(global_qtest);
g_free(args);
}
@@ -373,8 +586,14 @@ static void test_acpi_tcg(void)
/* Supplying -machine accel argument overrides the default (qtest).
* This is to make guest actually run.
*/
+ memset(&data, 0, sizeof(data));
+ data.machine = MACHINE_PC;
test_acpi_one("-machine accel=tcg", &data);
+ free_test_data(&data);
+ memset(&data, 0, sizeof(data));
+ data.machine = MACHINE_Q35;
+ test_acpi_one("-machine q35,accel=tcg", &data);
free_test_data(&data);
}
--
MST
next prev parent reply other threads:[~2014-01-20 14:05 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-20 14:09 [Qemu-devel] [PULL 00/29] acpi, pci, pc, virtio fixes and enhancements Michael S. Tsirkin
2014-01-20 14:09 ` [Qemu-devel] [PULL 01/29] Python-lang gdb script to extract x86_64 guest vmcore from qemu coredump Michael S. Tsirkin
2014-01-20 14:09 ` [Qemu-devel] [PULL 02/29] Add DSDT node for AppleSMC Michael S. Tsirkin
2014-01-20 14:09 ` [Qemu-devel] [PULL 03/29] ACPI: Fix AppleSMC _STA size Michael S. Tsirkin
2014-01-20 14:09 ` [Qemu-devel] [PULL 04/29] virtio: Fix return value for dummy function vhost_net_virtqueue_pending Michael S. Tsirkin
2014-01-20 14:09 ` [Qemu-devel] [PULL 05/29] acpi unit-test: add test files Michael S. Tsirkin
2014-01-20 14:09 ` [Qemu-devel] [PULL 06/29] configure: added acpi unit-test files Michael S. Tsirkin
2014-01-20 14:09 ` Michael S. Tsirkin [this message]
2014-01-20 14:09 ` [Qemu-devel] [PULL 08/29] configure: add CONFIG_IASL to config-host.h Michael S. Tsirkin
2014-01-20 14:09 ` [Qemu-devel] [PULL 09/29] acpi unit-test: extract iasl executable from configuration Michael S. Tsirkin
2014-01-20 14:09 ` [Qemu-devel] [PULL 10/29] acpi unit-test: added script to rebuild the expected aml files Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 11/29] acpi unit-test: hook to rebuild " Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 12/29] tests: fix acpi to work on bigendian host Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 13/29] acpi unit-test: renamed ssdt_tables to tables Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 14/29] acpi unit-test: resolved iasl crash Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 15/29] acpi unit-test: do not fail on asl mismatch Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 16/29] pc: make: fix dependencies: rebuild when included file is changed Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 17/29] pci: add pci_for_each_bus_depth_first Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 18/29] pcihp: generalization of piix4 acpi Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 19/29] piix4: add acpi pci hotplug support Michael S. Tsirkin
2014-01-20 16:16 ` Michael S. Tsirkin
2014-01-20 16:31 ` Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 20/29] acpi-build: enable hotplug for PCI bridges Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 21/29] acpi: factor out common cpu hotplug code for PIIX4/Q35 Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 22/29] acpi: ich9: add CPU hotplug handling to Q35 machine Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 23/29] pc: set PRST base in DSDT depending on chipset Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 24/29] pc: PIIX DSDT: exclude CPU/PCI hotplug & GPE0 IO range from PCI bus resources Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 25/29] pc: Q35 DSDT: exclude CPU hotplug " Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 26/29] pc: ACPI: expose PRST IO range via _CRS Michael S. Tsirkin
2014-01-20 14:10 ` [Qemu-devel] [PULL 27/29] pc: ACPI: unify source of CPU hotplug IO base/len Michael S. Tsirkin
2014-01-20 14:11 ` [Qemu-devel] [PULL 28/29] pc: ACPI: update acpi-dsdt.hex.generated q35-acpi-dsdt.hex.generated Michael S. Tsirkin
2014-01-20 14:11 ` [Qemu-devel] [PULL 29/29] acpi-test: update expected AML since recent changes Michael S. Tsirkin
2014-01-26 9:47 ` [Qemu-devel] [PULL 00/29] acpi, pci, pc, virtio fixes and enhancements Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390226872-781-8-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=marcel.a@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).