From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Peter Crosthwaite" <peter.crosthwaite@xilinx.com>,
patches@linaro.org, "Michael Matz" <matz@suse.de>,
"Alexander Graf" <agraf@suse.de>,
"Claudio Fontana" <claudio.fontana@linaro.org>,
"Dirk Mueller" <dmueller@suse.de>,
"Will Newton" <will.newton@linaro.org>,
"Laurent Desnogues" <laurent.desnogues@gmail.com>,
"Alex Bennée" <alex.bennee@linaro.org>,
kvmarm@lists.cs.columbia.edu,
"Christoffer Dall" <christoffer.dall@linaro.org>,
"Richard Henderson" <rth@twiddle.net>
Subject: [Qemu-devel] [PATCH 17/21] target-arm: A64: Implement 2-register misc compares, ABS, NEG
Date: Sun, 26 Jan 2014 19:25:08 +0000 [thread overview]
Message-ID: <1390764312-21789-18-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1390764312-21789-1-git-send-email-peter.maydell@linaro.org>
Implement the simple 2-register-misc operations we can share
with the scalar-two-register-misc code. (SUQADD, USQADD, SQABS,
SQNEG also fall into this category, but aren't implemented in
the scalar-2-register case yet either.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target-arm/translate-a64.c | 136 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 134 insertions(+), 2 deletions(-)
diff --git a/target-arm/translate-a64.c b/target-arm/translate-a64.c
index f03d645..d484967 100644
--- a/target-arm/translate-a64.c
+++ b/target-arm/translate-a64.c
@@ -7405,6 +7405,8 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
int opcode = extract32(insn, 12, 5);
bool u = extract32(insn, 29, 1);
bool is_q = extract32(insn, 30, 1);
+ int rn = extract32(insn, 5, 5);
+ int rd = extract32(insn, 0, 5);
switch (opcode) {
case 0x0: /* REV64, REV32 */
@@ -7443,8 +7445,6 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
return;
}
/* fall through */
- case 0x3: /* SUQADD, USQADD */
- case 0x7: /* SQABS, SQNEG */
case 0x8: /* CMGT, CMGE */
case 0x9: /* CMEQ, CMLE */
case 0xb: /* ABS, NEG */
@@ -7452,6 +7452,13 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
unallocated_encoding(s);
return;
}
+ break;
+ case 0x3: /* SUQADD, USQADD */
+ case 0x7: /* SQABS, SQNEG */
+ if (size == 3 && !is_q) {
+ unallocated_encoding(s);
+ return;
+ }
unsupported_encoding(s, insn);
return;
case 0xc ... 0xf:
@@ -7510,6 +7517,131 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
unallocated_encoding(s);
return;
}
+
+ if (size == 3) {
+ /* All 64-bit element operations can be shared with scalar 2misc */
+ int pass;
+
+ for (pass = 0; pass < (is_q ? 2 : 1); pass++) {
+ TCGv_i64 tcg_op = tcg_temp_new_i64();
+ TCGv_i64 tcg_res = tcg_temp_new_i64();
+
+ read_vec_element(s, tcg_op, rn, pass, MO_64);
+
+ handle_2misc_64(s, opcode, u, tcg_res, tcg_op);
+
+ write_vec_element(s, tcg_res, rd, pass, MO_64);
+
+ tcg_temp_free_i64(tcg_res);
+ tcg_temp_free_i64(tcg_op);
+ }
+ } else {
+ int pass;
+
+ for (pass = 0; pass < (is_q ? 4 : 2); pass++) {
+ TCGv_i32 tcg_op = tcg_temp_new_i32();
+ TCGv_i32 tcg_res = tcg_temp_new_i32();
+ TCGCond cond;
+
+ read_vec_element_i32(s, tcg_op, rn, pass, MO_32);
+
+ if (size == 2) {
+ /* Special cases for 32 bit elements */
+ switch (opcode) {
+ case 0xa: /* CMLT */
+ /* 32 bit integer comparison against zero, result is
+ * test ? (2^32 - 1) : 0. We implement via setcond(test)
+ * and inverting.
+ */
+ cond = TCG_COND_LT;
+ do_cmop:
+ tcg_gen_setcondi_i32(cond, tcg_res, tcg_op, 0);
+ tcg_gen_neg_i32(tcg_res, tcg_res);
+ break;
+ case 0x8: /* CMGT, CMGE */
+ cond = u ? TCG_COND_GE : TCG_COND_GT;
+ goto do_cmop;
+ case 0x9: /* CMEQ, CMLE */
+ cond = u ? TCG_COND_LE : TCG_COND_EQ;
+ goto do_cmop;
+ case 0xb: /* ABS, NEG */
+ if (u) {
+ tcg_gen_neg_i32(tcg_res, tcg_op);
+ } else {
+ TCGv_i32 tcg_zero = tcg_const_i32(0);
+ tcg_gen_neg_i32(tcg_res, tcg_op);
+ tcg_gen_movcond_i32(TCG_COND_GT, tcg_res, tcg_op,
+ tcg_zero, tcg_op, tcg_res);
+ tcg_temp_free_i32(tcg_zero);
+ }
+ break;
+ default:
+ g_assert_not_reached();
+ }
+ } else {
+ /* Use helpers for 8 and 16 bit elements */
+ switch (opcode) {
+ case 0x8: /* CMGT, CMGE */
+ case 0x9: /* CMEQ, CMLE */
+ case 0xa: /* CMLT */
+ {
+ static NeonGenTwoOpFn * const fns[3][2] = {
+ { gen_helper_neon_cgt_s8, gen_helper_neon_cgt_s16 },
+ { gen_helper_neon_cge_s8, gen_helper_neon_cge_s16 },
+ { gen_helper_neon_ceq_u8, gen_helper_neon_ceq_u16 },
+ };
+ NeonGenTwoOpFn *genfn;
+ int comp;
+ bool reverse;
+ TCGv_i32 tcg_zero = tcg_const_i32(0);
+
+ /* comp = index into [CMGT, CMGE, CMEQ, CMLE, CMLT] */
+ comp = (opcode - 0x8) * 2 + u;
+ /* ...but LE, LT are implemented as reverse GE, GT */
+ reverse = (comp > 2);
+ if (reverse) {
+ comp = 4 - comp;
+ }
+ genfn = fns[comp][size];
+ if (reverse) {
+ genfn(tcg_res, tcg_zero, tcg_op);
+ } else {
+ genfn(tcg_res, tcg_op, tcg_zero);
+ }
+ tcg_temp_free_i32(tcg_zero);
+ break;
+ }
+ case 0xb: /* ABS, NEG */
+ if (u) {
+ TCGv_i32 tcg_zero = tcg_const_i32(0);
+ if (size) {
+ gen_helper_neon_sub_u16(tcg_res, tcg_zero, tcg_op);
+ } else {
+ gen_helper_neon_sub_u8(tcg_res, tcg_zero, tcg_op);
+ }
+ tcg_temp_free_i32(tcg_zero);
+ } else {
+ if (size) {
+ gen_helper_neon_abs_s16(tcg_res, tcg_op);
+ } else {
+ gen_helper_neon_abs_s8(tcg_res, tcg_op);
+ }
+ }
+ break;
+ default:
+ g_assert_not_reached();
+ }
+ }
+
+ write_vec_element_i32(s, tcg_res, rd, pass, MO_32);
+
+ tcg_temp_free_i32(tcg_res);
+ tcg_temp_free_i32(tcg_op);
+ }
+ }
+ if (!is_q) {
+ clear_vec_high(s, rd);
+ }
}
/* C3.6.18 AdvSIMD vector x indexed element
--
1.8.5
next prev parent reply other threads:[~2014-01-26 19:25 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-26 19:24 [Qemu-devel] [PATCH 00/21] A64: Add Neon instructions, second and third sets Peter Maydell
2014-01-26 19:24 ` [Qemu-devel] [PATCH 01/21] target-arm: A64: Add SIMD three-different multiply accumulate insns Peter Maydell
2014-01-26 19:24 ` [Qemu-devel] [PATCH 02/21] target-arm: A64: Add SIMD three-different ABDL instructions Peter Maydell
2014-01-28 18:59 ` Peter Maydell
2014-01-26 19:24 ` [Qemu-devel] [PATCH 03/21] target-arm: A64: Add SIMD scalar 3 same add, sub and compare ops Peter Maydell
2014-01-26 19:24 ` [Qemu-devel] [PATCH 04/21] target-arm: A64: Add top level decode for SIMD 3-same group Peter Maydell
2014-01-26 19:24 ` [Qemu-devel] [PATCH 05/21] target-arm: A64: Add logic ops from SIMD 3 same group Peter Maydell
2014-01-26 19:24 ` [Qemu-devel] [PATCH 06/21] target-arm: A64: Add integer ops from SIMD 3-same group Peter Maydell
2014-01-26 19:24 ` [Qemu-devel] [PATCH 07/21] target-arm: A64: Add simple SIMD 3-same floating point ops Peter Maydell
2014-01-26 19:24 ` [Qemu-devel] [PATCH 08/21] target-arm: A64: Add SIMD shift by immediate Peter Maydell
2014-01-26 19:25 ` [Qemu-devel] [PATCH 09/21] target-arm: A64: Implement SIMD 3-reg-same shift and saturate insns Peter Maydell
2014-01-28 17:05 ` Richard Henderson
2014-01-26 19:25 ` [Qemu-devel] [PATCH 10/21] target-arm: A64: Implement remaining non-pairwise int SIMD 3-reg-same insns Peter Maydell
2014-01-28 17:13 ` Richard Henderson
2014-01-28 17:19 ` Peter Maydell
2014-01-26 19:25 ` [Qemu-devel] [PATCH 11/21] target-arm: A64: Implement pairwise integer ops from 3-reg-same SIMD Peter Maydell
2014-01-28 17:21 ` Richard Henderson
2014-01-28 18:27 ` Peter Maydell
2014-01-26 19:25 ` [Qemu-devel] [PATCH 12/21] tcg: Add TCGV_UNUSED_PTR, TCGV_IS_UNUSED_PTR, TCGV_EQUAL_PTR Peter Maydell
2014-01-28 17:23 ` Richard Henderson
2014-01-26 19:25 ` [Qemu-devel] [PATCH 13/21] target-arm: A64: Implement scalar pairwise ops Peter Maydell
2014-01-28 17:28 ` Richard Henderson
2014-01-26 19:25 ` [Qemu-devel] [PATCH 14/21] target-arm: A64: Implement remaining integer scalar-3-same insns Peter Maydell
2014-01-28 21:01 ` Richard Henderson
2014-01-26 19:25 ` [Qemu-devel] [PATCH 15/21] target-arm: A64: Add SIMD simple 64 bit insns from scalar 2-reg misc Peter Maydell
2014-01-28 17:34 ` Richard Henderson
2014-01-26 19:25 ` [Qemu-devel] [PATCH 16/21] target-arm: A64: Add skeleton decode for SIMD 2-reg misc group Peter Maydell
2014-01-28 17:40 ` Richard Henderson
2014-01-26 19:25 ` Peter Maydell [this message]
2014-01-28 17:44 ` [Qemu-devel] [PATCH 17/21] target-arm: A64: Implement 2-register misc compares, ABS, NEG Richard Henderson
2014-01-26 19:25 ` [Qemu-devel] [PATCH 18/21] target-arm: A64: Implement 2-reg-misc CNT, NOT and RBIT Peter Maydell
2014-01-28 17:47 ` Richard Henderson
2014-01-26 19:25 ` [Qemu-devel] [PATCH 19/21] target-arm: A64: Add narrowing 2-reg-misc instructions Peter Maydell
2014-01-28 20:52 ` Richard Henderson
2014-01-26 19:25 ` [Qemu-devel] [PATCH 20/21] target-arm: A64: Add 2-reg-misc REV* instructions Peter Maydell
2014-01-28 20:57 ` Richard Henderson
2014-01-26 19:25 ` [Qemu-devel] [PATCH 21/21] target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc group Peter Maydell
2014-01-28 20:59 ` Richard Henderson
2014-01-26 19:33 ` [Qemu-devel] [PATCH 00/21] A64: Add Neon instructions, second and third sets Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390764312-21789-18-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=agraf@suse.de \
--cc=alex.bennee@linaro.org \
--cc=christoffer.dall@linaro.org \
--cc=claudio.fontana@linaro.org \
--cc=dmueller@suse.de \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=laurent.desnogues@gmail.com \
--cc=matz@suse.de \
--cc=patches@linaro.org \
--cc=peter.crosthwaite@xilinx.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=will.newton@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).