[Qemu-devel] [PATCH v2 2/4] hw:piix4:acpi: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDR

[Igor Mammedov <imammedo@redhat.com>]

... removes dependency of mmio handler on PCI_HOTPLUG_ADDR.
It will be needed in case of Q35 where base could be different.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
 hw/acpi/pcihp.c |   24 ++++++++++++------------
 1 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
index 464739a..64c8cf2 100644
--- a/hw/acpi/pcihp.c
+++ b/hw/acpi/pcihp.c
@@ -48,11 +48,11 @@
 
 #define PCI_HOTPLUG_ADDR 0xae00
 #define PCI_HOTPLUG_SIZE 0x0014
-#define PCI_UP_BASE 0xae00
-#define PCI_DOWN_BASE 0xae04
-#define PCI_EJ_BASE 0xae08
-#define PCI_RMV_BASE 0xae0c
-#define PCI_SEL_BASE 0xae10
+#define PCI_UP_BASE 0x0000
+#define PCI_DOWN_BASE 0x0004
+#define PCI_EJ_BASE 0x0008
+#define PCI_RMV_BASE 0x000c
+#define PCI_SEL_BASE 0x0010
 
 typedef struct AcpiPciHpFind {
     int bsel;
@@ -213,24 +213,24 @@ static uint64_t pci_read(void *opaque, hwaddr addr, unsigned int size)
     }
 
     switch (addr) {
-    case PCI_UP_BASE - PCI_HOTPLUG_ADDR:
+    case PCI_UP_BASE:
         val = s->acpi_pcihp_pci_status[bsel].up;
         s->acpi_pcihp_pci_status[bsel].up = 0;
         ACPI_PCIHP_DPRINTF("pci_up_read %" PRIu32 "\n", val);
         break;
-    case PCI_DOWN_BASE - PCI_HOTPLUG_ADDR:
+    case PCI_DOWN_BASE:
         val = s->acpi_pcihp_pci_status[bsel].down;
         ACPI_PCIHP_DPRINTF("pci_down_read %" PRIu32 "\n", val);
         break;
-    case PCI_EJ_BASE - PCI_HOTPLUG_ADDR:
+    case PCI_EJ_BASE:
         /* No feature defined yet */
         ACPI_PCIHP_DPRINTF("pci_features_read %" PRIu32 "\n", val);
         break;
-    case PCI_RMV_BASE - PCI_HOTPLUG_ADDR:
+    case PCI_RMV_BASE:
         val = s->acpi_pcihp_pci_status[bsel].hotplug_enable;
         ACPI_PCIHP_DPRINTF("pci_rmv_read %" PRIu32 "\n", val);
         break;
-    case PCI_SEL_BASE - PCI_HOTPLUG_ADDR:
+    case PCI_SEL_BASE:
         val = s->hotplug_select;
         ACPI_PCIHP_DPRINTF("pci_sel_read %" PRIu32 "\n", val);
     default:
@@ -245,7 +245,7 @@ static void pci_write(void *opaque, hwaddr addr, uint64_t data,
 {
     AcpiPciHpState *s = opaque;
     switch (addr) {
-    case PCI_EJ_BASE - PCI_HOTPLUG_ADDR:
+    case PCI_EJ_BASE:
         if (s->hotplug_select >= ACPI_PCIHP_MAX_HOTPLUG_BUS) {
             break;
         }
@@ -253,7 +253,7 @@ static void pci_write(void *opaque, hwaddr addr, uint64_t data,
         ACPI_PCIHP_DPRINTF("pciej write %" HWADDR_PRIx " <== %" PRIu64 "\n",
                       addr, data);
         break;
-    case PCI_SEL_BASE - PCI_HOTPLUG_ADDR:
+    case PCI_SEL_BASE:
         s->hotplug_select = data;
         ACPI_PCIHP_DPRINTF("pcisel write %" HWADDR_PRIx " <== %" PRIu64 "\n",
                       addr, data);
-- 
1.7.1