From: Tom Musta <tommusta@gmail.com>
To: qemu-devel@nongnu.org
Cc: Tom Musta <tommusta@gmail.com>, qemu-ppc@nongnu.org
Subject: [Qemu-devel] [PATCH 5/8] target-ppc: Load Quadword
Date: Mon, 27 Jan 2014 11:54:21 -0600 [thread overview]
Message-ID: <1390845264-2532-6-git-send-email-tommusta@gmail.com> (raw)
In-Reply-To: <1390845264-2532-1-git-send-email-tommusta@gmail.com>
This patch adds the Book I (user space) Load Quadword (lq) instruction.
This instruction was introduced into Book I in Power ISA V2.07. Previous
versions of the architecture supported this as a privileged instruction.
Previous versions of the architecture also did not support Little Endian
mode.
Note that this patch also adds the PPC_64BX flag to the Power8 model,
which enables the lq instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
---
target-ppc/translate.c | 45 ++++++++++++++++++++++++++++--------------
target-ppc/translate_init.c | 2 +-
2 files changed, 31 insertions(+), 16 deletions(-)
diff --git a/target-ppc/translate.c b/target-ppc/translate.c
index 90cbb72..15a4d1b 100644
--- a/target-ppc/translate.c
+++ b/target-ppc/translate.c
@@ -2861,36 +2861,51 @@ static void gen_ld(DisasContext *ctx)
/* lq */
static void gen_lq(DisasContext *ctx)
{
+ /* lq is a legal user mode instruction starting in ISA 2.07 */
+ int legal_in_user_mode = (ctx->insns_flags2 & PPC2_LSQ_ISA207) != 0;
+
+ if (!legal_in_user_mode) {
#if defined(CONFIG_USER_ONLY)
- gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
+ gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
+ return;
#else
+ if (unlikely(ctx->mem_idx == 0)) {
+ gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
+ return;
+ }
+
+ if (unlikely(ctx->le_mode)) {
+ /* Little-endian mode is not handled */
+ gen_exception_err(ctx, POWERPC_EXCP_ALIGN, POWERPC_EXCP_ALIGN_LE);
+ return;
+ }
+#endif
+ }
+
int ra, rd;
TCGv EA;
- /* Restore CPU state */
- if (unlikely(ctx->mem_idx == 0)) {
- gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
- return;
- }
ra = rA(ctx->opcode);
rd = rD(ctx->opcode);
if (unlikely((rd & 1) || rd == ra)) {
gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL);
return;
}
- if (unlikely(ctx->le_mode)) {
- /* Little-endian mode is not handled */
- gen_exception_err(ctx, POWERPC_EXCP_ALIGN, POWERPC_EXCP_ALIGN_LE);
- return;
- }
+
gen_set_access_type(ctx, ACCESS_INT);
EA = tcg_temp_new();
gen_addr_imm_index(ctx, EA, 0x0F);
- gen_qemu_ld64(ctx, cpu_gpr[rd], EA);
- gen_addr_add(ctx, EA, EA, 8);
- gen_qemu_ld64(ctx, cpu_gpr[rd+1], EA);
+
+ if (unlikely(ctx->le_mode)) {
+ gen_qemu_ld64(ctx, cpu_gpr[rd+1], EA);
+ gen_addr_add(ctx, EA, EA, 8);
+ gen_qemu_ld64(ctx, cpu_gpr[rd], EA);
+ } else {
+ gen_qemu_ld64(ctx, cpu_gpr[rd], EA);
+ gen_addr_add(ctx, EA, EA, 8);
+ gen_qemu_ld64(ctx, cpu_gpr[rd+1], EA);
+ }
tcg_temp_free(EA);
-#endif
}
#endif
diff --git a/target-ppc/translate_init.c b/target-ppc/translate_init.c
index 886238a..d7bcbba 100644
--- a/target-ppc/translate_init.c
+++ b/target-ppc/translate_init.c
@@ -7333,7 +7333,7 @@ POWERPC_FAMILY(POWER8)(ObjectClass *oc, void *data)
PPC_CACHE | PPC_CACHE_ICBI | PPC_CACHE_DCBZ |
PPC_MEM_SYNC | PPC_MEM_EIEIO |
PPC_MEM_TLBIE | PPC_MEM_TLBSYNC |
- PPC_64B | PPC_ALTIVEC |
+ PPC_64B | PPC_64BX | PPC_ALTIVEC |
PPC_SEGMENT_64B | PPC_SLBI |
PPC_POPCNTB | PPC_POPCNTWD;
pcc->insns_flags2 = PPC2_VSX | PPC2_VSX207 | PPC2_DFP | PPC2_DBRX |
--
1.7.1
next prev parent reply other threads:[~2014-01-27 17:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-27 17:54 [Qemu-devel] [PATCH 0/8] target-ppc: Base ISA V2.07 for Power8 Tom Musta
2014-01-27 17:54 ` [Qemu-devel] [PATCH 1/8] target-ppc: Add Flag for bctar Tom Musta
2014-01-27 17:54 ` [Qemu-devel] [PATCH 2/8] target-ppc: Add Target Address SPR (TAR) to Power8 Tom Musta
2014-01-27 17:54 ` [Qemu-devel] [PATCH 3/8] target-ppc: Add bctar Instruction Tom Musta
2014-01-27 18:46 ` [Qemu-devel] [Qemu-ppc] " Alexander Graf
2014-01-27 19:34 ` Tom Musta
2014-01-27 21:44 ` Alexander Graf
2014-01-27 17:54 ` [Qemu-devel] [PATCH 4/8] target-ppc: Add Flag for ISA 2.07 Load/Store Quadword Instructions Tom Musta
2014-01-27 17:54 ` Tom Musta [this message]
2014-01-27 18:55 ` [Qemu-devel] [Qemu-ppc] [PATCH 5/8] target-ppc: Load Quadword Alexander Graf
2014-01-27 19:53 ` Tom Musta
2014-01-27 21:43 ` Alexander Graf
2014-01-27 17:54 ` [Qemu-devel] [PATCH 6/8] target-ppc: Store Quadword Tom Musta
2014-01-27 17:54 ` [Qemu-devel] [PATCH 7/8] target-ppc: Add Load Quadword and Reserve Tom Musta
2014-01-27 18:59 ` [Qemu-devel] [Qemu-ppc] " Alexander Graf
2014-01-27 20:01 ` Tom Musta
2014-01-27 17:54 ` [Qemu-devel] [PATCH 8/8] target-ppc: Add Store Quadword Conditional Tom Musta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390845264-2532-6-git-send-email-tommusta@gmail.com \
--to=tommusta@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).