From: Tom Musta <tommusta@gmail.com>
To: qemu-devel@nongnu.org
Cc: Tom Musta <tommusta@gmail.com>, qemu-ppc@nongnu.org
Subject: [Qemu-devel] [PATCH 6/8] target-ppc: Store Quadword
Date: Mon, 27 Jan 2014 11:54:22 -0600 [thread overview]
Message-ID: <1390845264-2532-7-git-send-email-tommusta@gmail.com> (raw)
In-Reply-To: <1390845264-2532-1-git-send-email-tommusta@gmail.com>
This patch adds support for the Store Quadword instruction in user mode. Prior
to Power ISA 2.07, stq was legal only in privileged mode. Support for Little
Endian mode is also new in ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
---
target-ppc/translate.c | 43 ++++++++++++++++++++++++++++---------------
1 files changed, 28 insertions(+), 15 deletions(-)
diff --git a/target-ppc/translate.c b/target-ppc/translate.c
index 15a4d1b..bb1dc82 100644
--- a/target-ppc/translate.c
+++ b/target-ppc/translate.c
@@ -2991,34 +2991,47 @@ static void gen_std(DisasContext *ctx)
TCGv EA;
rs = rS(ctx->opcode);
- if ((ctx->opcode & 0x3) == 0x2) {
+ if ((ctx->opcode & 0x3) == 0x2) { /* stq */
+ int legal_in_user_mode = (ctx->insns_flags2 & PPC2_LSQ_ISA207) != 0;
+ if (!legal_in_user_mode) {
#if defined(CONFIG_USER_ONLY)
- gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
-#else
- /* stq */
- if (unlikely(ctx->mem_idx == 0)) {
gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
return;
+#else
+ if (unlikely(ctx->mem_idx == 0)) {
+ gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
+ return;
+ }
+
+ if (unlikely(ctx->le_mode)) {
+ /* Little-endian mode is not handled */
+ gen_exception_err(ctx, POWERPC_EXCP_ALIGN,
+ POWERPC_EXCP_ALIGN_LE);
+ return;
+ }
+#endif
}
+
if (unlikely(rs & 1)) {
gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL);
return;
}
- if (unlikely(ctx->le_mode)) {
- /* Little-endian mode is not handled */
- gen_exception_err(ctx, POWERPC_EXCP_ALIGN, POWERPC_EXCP_ALIGN_LE);
- return;
- }
gen_set_access_type(ctx, ACCESS_INT);
EA = tcg_temp_new();
gen_addr_imm_index(ctx, EA, 0x03);
- gen_qemu_st64(ctx, cpu_gpr[rs], EA);
- gen_addr_add(ctx, EA, EA, 8);
- gen_qemu_st64(ctx, cpu_gpr[rs+1], EA);
+
+ if (unlikely(ctx->le_mode)) {
+ gen_qemu_st64(ctx, cpu_gpr[rs+1], EA);
+ gen_addr_add(ctx, EA, EA, 8);
+ gen_qemu_st64(ctx, cpu_gpr[rs], EA);
+ } else {
+ gen_qemu_st64(ctx, cpu_gpr[rs], EA);
+ gen_addr_add(ctx, EA, EA, 8);
+ gen_qemu_st64(ctx, cpu_gpr[rs+1], EA);
+ }
tcg_temp_free(EA);
-#endif
} else {
- /* std / stdu */
+ /* std / stdu*/
if (Rc(ctx->opcode)) {
if (unlikely(rA(ctx->opcode) == 0)) {
gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL);
--
1.7.1
next prev parent reply other threads:[~2014-01-27 17:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-27 17:54 [Qemu-devel] [PATCH 0/8] target-ppc: Base ISA V2.07 for Power8 Tom Musta
2014-01-27 17:54 ` [Qemu-devel] [PATCH 1/8] target-ppc: Add Flag for bctar Tom Musta
2014-01-27 17:54 ` [Qemu-devel] [PATCH 2/8] target-ppc: Add Target Address SPR (TAR) to Power8 Tom Musta
2014-01-27 17:54 ` [Qemu-devel] [PATCH 3/8] target-ppc: Add bctar Instruction Tom Musta
2014-01-27 18:46 ` [Qemu-devel] [Qemu-ppc] " Alexander Graf
2014-01-27 19:34 ` Tom Musta
2014-01-27 21:44 ` Alexander Graf
2014-01-27 17:54 ` [Qemu-devel] [PATCH 4/8] target-ppc: Add Flag for ISA 2.07 Load/Store Quadword Instructions Tom Musta
2014-01-27 17:54 ` [Qemu-devel] [PATCH 5/8] target-ppc: Load Quadword Tom Musta
2014-01-27 18:55 ` [Qemu-devel] [Qemu-ppc] " Alexander Graf
2014-01-27 19:53 ` Tom Musta
2014-01-27 21:43 ` Alexander Graf
2014-01-27 17:54 ` Tom Musta [this message]
2014-01-27 17:54 ` [Qemu-devel] [PATCH 7/8] target-ppc: Add Load Quadword and Reserve Tom Musta
2014-01-27 18:59 ` [Qemu-devel] [Qemu-ppc] " Alexander Graf
2014-01-27 20:01 ` Tom Musta
2014-01-27 17:54 ` [Qemu-devel] [PATCH 8/8] target-ppc: Add Store Quadword Conditional Tom Musta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390845264-2532-7-git-send-email-tommusta@gmail.com \
--to=tommusta@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).