From: Markus Armbruster <armbru@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, afaerber@suse.de, stefanha@redhat.com, agraf@suse.de
Subject: [Qemu-devel] [PATCH v3 9/9] ide: Drop redundant IDEState member wwn
Date: Thu, 30 Jan 2014 13:16:38 +0100 [thread overview]
Message-ID: <1391084198-21021-10-git-send-email-armbru@redhat.com> (raw)
In-Reply-To: <1391084198-21021-1-git-send-email-armbru@redhat.com>
It's a copy of dev->wwn. The copy was needed for non-qdevified
controllers, which lacked dev.
Note that pci_piix3_xen_ide_unplug() did not clear the copy (it only
cleared the copy of bs). Begs the question whether stale data could
have been used after unplug. As far as I can tell, the copy was used
only when the copy of bs was non-null, thus no bug there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
hw/ide/core.c | 18 ++++++++----------
hw/ide/internal.h | 4 +---
hw/ide/qdev.c | 3 +--
3 files changed, 10 insertions(+), 15 deletions(-)
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 1c4522a..98b6611 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -142,7 +142,7 @@ static void ide_identify(IDEState *s)
/* 13=flush_cache_ext,12=flush_cache,10=lba48 */
put_le16(p + 83, (1 << 14) | (1 << 13) | (1 <<12) | (1 << 10));
/* 14=set to 1, 8=has WWN, 1=SMART self test, 0=SMART error logging */
- if (s->wwn) {
+ if (s->dev->wwn) {
put_le16(p + 84, (1 << 14) | (1 << 8) | 0);
} else {
put_le16(p + 84, (1 << 14) | 0);
@@ -156,7 +156,7 @@ static void ide_identify(IDEState *s)
/* 13=flush_cache_ext,12=flush_cache,10=lba48 */
put_le16(p + 86, (1 << 13) | (1 <<12) | (1 << 10));
/* 14=set to 1, 8=has WWN, 1=SMART self test, 0=SMART error logging */
- if (s->wwn) {
+ if (s->dev->wwn) {
put_le16(p + 87, (1 << 14) | (1 << 8) | 0);
} else {
put_le16(p + 87, (1 << 14) | 0);
@@ -170,12 +170,12 @@ static void ide_identify(IDEState *s)
if (dev && dev->conf.physical_block_size)
put_le16(p + 106, 0x6000 | get_physical_block_exp(&dev->conf));
- if (s->wwn) {
+ if (s->dev->wwn) {
/* LE 16-bit words 111-108 contain 64-bit World Wide Name */
- put_le16(p + 108, s->wwn >> 48);
- put_le16(p + 109, s->wwn >> 32);
- put_le16(p + 110, s->wwn >> 16);
- put_le16(p + 111, s->wwn);
+ put_le16(p + 108, s->dev->wwn >> 48);
+ put_le16(p + 109, s->dev->wwn >> 32);
+ put_le16(p + 110, s->dev->wwn >> 16);
+ put_le16(p + 111, s->dev->wwn);
}
if (dev && dev->conf.discard_granularity) {
put_le16(p + 169, 1); /* TRIM support */
@@ -2088,8 +2088,7 @@ static const BlockDevOps ide_cd_block_ops = {
.is_medium_locked = ide_cd_is_medium_locked,
};
-int ide_init_drive(IDEState *s, IDEDriveKind kind,
- uint64_t wwn)
+int ide_init_drive(IDEState *s, IDEDriveKind kind)
{
BlockDriverState *bs = s->dev->conf.bs;
uint64_t nb_sectors;
@@ -2098,7 +2097,6 @@ int ide_init_drive(IDEState *s, IDEDriveKind kind,
bdrv_get_geometry(bs, &nb_sectors);
s->nb_sectors = nb_sectors;
- s->wwn = wwn;
/* The SMART values should be preserved across power cycles
but they aren't. */
s->smart_enabled = 1;
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index c4a5773..95ea75c 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -350,7 +350,6 @@ struct IDEState {
int identify_set;
uint8_t identify_data[512];
int drive_serial;
- uint64_t wwn;
/* ide regs */
uint8_t feature;
uint8_t error;
@@ -541,8 +540,7 @@ uint32_t ide_data_readw(void *opaque, uint32_t addr);
void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
uint32_t ide_data_readl(void *opaque, uint32_t addr);
-int ide_init_drive(IDEState *s, IDEDriveKind kind,
- uint64_t wwn);
+int ide_init_drive(IDEState *s, IDEDriveKind kind);
void ide_init2(IDEBus *bus, qemu_irq irq);
void ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c
index 915bc27..17404b8 100644
--- a/hw/ide/qdev.c
+++ b/hw/ide/qdev.c
@@ -182,8 +182,7 @@ static int ide_dev_initfn(IDEDevice *dev, IDEDriveKind kind)
}
}
- if (ide_init_drive(s, kind,
- dev->wwn) < 0) {
+ if (ide_init_drive(s, kind) < 0) {
return -1;
}
--
1.8.1.4
prev parent reply other threads:[~2014-01-30 12:17 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-30 12:16 [Qemu-devel] [PATCH v3 0/9] Clean up IDE after completion of qdevification Markus Armbruster
2014-01-30 12:16 ` [Qemu-devel] [PATCH v3 1/9] ide: Move IDEDevice pointer from IDEBus to IDEState Markus Armbruster
2014-01-30 12:16 ` [Qemu-devel] [PATCH v3 2/9] ide: Use IDEState member dev for "device connected" test Markus Armbruster
2014-01-30 12:16 ` [Qemu-devel] [PATCH v3 3/9] ide: Don't block-align IDEState member smart_selftest_data Markus Armbruster
2014-01-30 12:16 ` [Qemu-devel] [PATCH v3 4/9] ide: Drop redundant IDEState member bs Markus Armbruster
2014-02-03 14:54 ` Kevin Wolf
2014-02-05 14:07 ` Markus Armbruster
2014-02-05 17:09 ` Stefano Stabellini
2014-02-06 7:02 ` Markus Armbruster
2014-02-07 12:58 ` Stefano Stabellini
2014-02-11 14:41 ` Markus Armbruster
2014-02-12 9:16 ` Markus Armbruster
2014-02-12 13:48 ` Stefano Stabellini
2014-01-30 12:16 ` [Qemu-devel] [PATCH v3 5/9] ide: Drop redundant IDEState geometry members Markus Armbruster
2014-01-30 12:16 ` [Qemu-devel] [PATCH v3 6/9] ide: Drop redundant IDEState member version Markus Armbruster
2014-01-30 12:16 ` [Qemu-devel] [PATCH v3 7/9] ide: Drop redundant IDEState member drive_serial_str Markus Armbruster
2014-01-30 12:16 ` [Qemu-devel] [PATCH v3 8/9] ide: Drop redundant IDEState member model Markus Armbruster
2014-01-30 12:16 ` Markus Armbruster [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1391084198-21021-10-git-send-email-armbru@redhat.com \
--to=armbru@redhat.com \
--cc=afaerber@suse.de \
--cc=agraf@suse.de \
--cc=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).