qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Tom Musta <tommusta@gmail.com>
To: qemu-devel@nongnu.org
Cc: Tom Musta <tommusta@gmail.com>, qemu-ppc@nongnu.org
Subject: [Qemu-devel] [V2 PATCH 6/9] target-ppc: Load Quadword
Date: Fri, 31 Jan 2014 13:34:03 -0600	[thread overview]
Message-ID: <1391196846-12188-7-git-send-email-tommusta@gmail.com> (raw)
In-Reply-To: <1391196846-12188-1-git-send-email-tommusta@gmail.com>

This patch adds the Book I (user space) Load Quadword (lq) instruction.
This instruction was introduced into Book I in Power ISA V2.07.  Previous
versions of the architecture supported this as a privileged instruction.
Previous versions of the architecture also did not support Little Endian
mode.

Note that this patch also adds the PPC_64BX flag to the Power8 model,
which enables the lq instruction.

Signed-off-by: Tom Musta <tommusta@gmail.com>
---
V2: Refactored the user-mode and LE checks per Alex Graf's review.

 target-ppc/translate.c      |   40 ++++++++++++++++++++++++----------------
 target-ppc/translate_init.c |    2 +-
 2 files changed, 25 insertions(+), 17 deletions(-)

diff --git a/target-ppc/translate.c b/target-ppc/translate.c
index 6ec4127..e36686e 100644
--- a/target-ppc/translate.c
+++ b/target-ppc/translate.c
@@ -2872,36 +2872,44 @@ static void gen_ld(DisasContext *ctx)
 /* lq */
 static void gen_lq(DisasContext *ctx)
 {
-#if defined(CONFIG_USER_ONLY)
-    gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
-#else
-    int ra, rd;
-    TCGv EA;
+    /* lq is a legal user mode instruction starting in ISA 2.07 */
+    bool legal_in_user_mode = (ctx->insns_flags2 & PPC2_LSQ_ISA207) != 0;
+    bool le_is_supported = (ctx->insns_flags2 & PPC2_LSQ_ISA207) != 0;
 
-    /* Restore CPU state */
-    if (unlikely(ctx->mem_idx == 0)) {
+    if (!legal_in_user_mode && is_user_mode(ctx)) {
         gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
         return;
     }
+
+    if (!le_is_supported && ctx->le_mode) {
+        gen_exception_err(ctx, POWERPC_EXCP_ALIGN, POWERPC_EXCP_ALIGN_LE);
+        return;
+    }
+
+    int ra, rd;
+    TCGv EA;
+
     ra = rA(ctx->opcode);
     rd = rD(ctx->opcode);
     if (unlikely((rd & 1) || rd == ra)) {
         gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL);
         return;
     }
-    if (unlikely(ctx->le_mode)) {
-        /* Little-endian mode is not handled */
-        gen_exception_err(ctx, POWERPC_EXCP_ALIGN, POWERPC_EXCP_ALIGN_LE);
-        return;
-    }
+
     gen_set_access_type(ctx, ACCESS_INT);
     EA = tcg_temp_new();
     gen_addr_imm_index(ctx, EA, 0x0F);
-    gen_qemu_ld64(ctx, cpu_gpr[rd], EA);
-    gen_addr_add(ctx, EA, EA, 8);
-    gen_qemu_ld64(ctx, cpu_gpr[rd+1], EA);
+
+    if (unlikely(ctx->le_mode)) {
+        gen_qemu_ld64(ctx, cpu_gpr[rd+1], EA);
+        gen_addr_add(ctx, EA, EA, 8);
+        gen_qemu_ld64(ctx, cpu_gpr[rd], EA);
+    } else {
+        gen_qemu_ld64(ctx, cpu_gpr[rd], EA);
+        gen_addr_add(ctx, EA, EA, 8);
+        gen_qemu_ld64(ctx, cpu_gpr[rd+1], EA);
+    }
     tcg_temp_free(EA);
-#endif
 }
 #endif
 
diff --git a/target-ppc/translate_init.c b/target-ppc/translate_init.c
index 886238a..d7bcbba 100644
--- a/target-ppc/translate_init.c
+++ b/target-ppc/translate_init.c
@@ -7333,7 +7333,7 @@ POWERPC_FAMILY(POWER8)(ObjectClass *oc, void *data)
                        PPC_CACHE | PPC_CACHE_ICBI | PPC_CACHE_DCBZ |
                        PPC_MEM_SYNC | PPC_MEM_EIEIO |
                        PPC_MEM_TLBIE | PPC_MEM_TLBSYNC |
-                       PPC_64B | PPC_ALTIVEC |
+                       PPC_64B | PPC_64BX | PPC_ALTIVEC |
                        PPC_SEGMENT_64B | PPC_SLBI |
                        PPC_POPCNTB | PPC_POPCNTWD;
     pcc->insns_flags2 = PPC2_VSX | PPC2_VSX207 | PPC2_DFP | PPC2_DBRX |
-- 
1.7.1

  parent reply	other threads:[~2014-01-31 19:34 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-31 19:33 [Qemu-devel] [V2 PATCH 0/9] target-ppc: Base ISA V2.07 for Power8 Tom Musta
2014-01-31 19:33 ` [Qemu-devel] [V2 PATCH 1/9] target-ppc: Add Flag for bctar Tom Musta
2014-01-31 19:33 ` [Qemu-devel] [V2 PATCH 2/9] target-ppc: Add Target Address SPR (TAR) to Power8 Tom Musta
2014-01-31 19:34 ` [Qemu-devel] [V2 PATCH 3/9] target-ppc: Add bctar Instruction Tom Musta
2014-01-31 19:34 ` [Qemu-devel] [V2 PATCH 4/9] target-ppc: Add Flag for ISA 2.07 Load/Store Quadword Instructions Tom Musta
2014-01-31 19:34 ` [Qemu-devel] [V2 PATCH 5/9] target-ppc: Add is_user_mode Utility Routine Tom Musta
2014-01-31 19:34 ` Tom Musta [this message]
2014-02-05  9:43   ` [Qemu-devel] [Qemu-ppc] [V2 PATCH 6/9] target-ppc: Load Quadword Alexander Graf
2014-02-05 16:12     ` Tom Musta
2014-02-05 16:27       ` Eric Blake
2014-01-31 19:34 ` [Qemu-devel] [V2 PATCH 7/9] target-ppc: Store Quadword Tom Musta
2014-01-31 19:34 ` [Qemu-devel] [V2 PATCH 8/9] target-ppc: Add Load Quadword and Reserve Tom Musta
2014-01-31 19:34 ` [Qemu-devel] [V2 PATCH 9/9] target-ppc: Add Store Quadword Conditional Tom Musta
2014-02-05  9:48   ` [Qemu-devel] [Qemu-ppc] " Alexander Graf
2014-02-05 16:14     ` Tom Musta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1391196846-12188-7-git-send-email-tommusta@gmail.com \
    --to=tommusta@gmail.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).