From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Peter Crosthwaite" <peter.crosthwaite@xilinx.com>,
patches@linaro.org, "Michael Matz" <matz@suse.de>,
"Alexander Graf" <agraf@suse.de>,
"Claudio Fontana" <claudio.fontana@linaro.org>,
"Dirk Mueller" <dmueller@suse.de>,
"Will Newton" <will.newton@linaro.org>,
"Laurent Desnogues" <laurent.desnogues@gmail.com>,
"Alex Bennée" <alex.bennee@linaro.org>,
kvmarm@lists.cs.columbia.edu,
"Christoffer Dall" <christoffer.dall@linaro.org>,
"Richard Henderson" <rth@twiddle.net>
Subject: [Qemu-devel] [PATCH v2 10/13] target-arm: A64: Implement 2-reg-misc CNT, NOT and RBIT
Date: Sat, 1 Feb 2014 23:00:04 +0000 [thread overview]
Message-ID: <1391295607-1426-11-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1391295607-1426-1-git-send-email-peter.maydell@linaro.org>
Implement the 2-reg-misc CNT, NOT and RBIT instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
target-arm/helper.h | 1 +
target-arm/neon_helper.c | 12 ++++++++++++
target-arm/translate-a64.c | 34 ++++++++++++++++++++++++++++------
3 files changed, 41 insertions(+), 6 deletions(-)
diff --git a/target-arm/helper.h b/target-arm/helper.h
index 71b8411..951e6ad 100644
--- a/target-arm/helper.h
+++ b/target-arm/helper.h
@@ -320,6 +320,7 @@ DEF_HELPER_1(neon_cls_s8, i32, i32)
DEF_HELPER_1(neon_cls_s16, i32, i32)
DEF_HELPER_1(neon_cls_s32, i32, i32)
DEF_HELPER_1(neon_cnt_u8, i32, i32)
+DEF_HELPER_FLAGS_1(neon_rbit_u8, TCG_CALL_NO_RWG_SE, i32, i32)
DEF_HELPER_3(neon_qdmulh_s16, i32, env, i32, i32)
DEF_HELPER_3(neon_qrdmulh_s16, i32, env, i32, i32)
diff --git a/target-arm/neon_helper.c b/target-arm/neon_helper.c
index be6fbd9..b4c8690 100644
--- a/target-arm/neon_helper.c
+++ b/target-arm/neon_helper.c
@@ -1133,6 +1133,18 @@ uint32_t HELPER(neon_cnt_u8)(uint32_t x)
return x;
}
+/* Reverse bits in each 8 bit word */
+uint32_t HELPER(neon_rbit_u8)(uint32_t x)
+{
+ x = ((x & 0xf0f0f0f0) >> 4)
+ | ((x & 0x0f0f0f0f) << 4);
+ x = ((x & 0x88888888) >> 3)
+ | ((x & 0x44444444) >> 1)
+ | ((x & 0x22222222) << 1)
+ | ((x & 0x11111111) << 3);
+ return x;
+}
+
#define NEON_QDMULH16(dest, src1, src2, round) do { \
uint32_t tmp = (int32_t)(int16_t) src1 * (int16_t) src2; \
if ((tmp ^ (tmp << 1)) & SIGNBIT) { \
diff --git a/target-arm/translate-a64.c b/target-arm/translate-a64.c
index c071663..dd1bbeb 100644
--- a/target-arm/translate-a64.c
+++ b/target-arm/translate-a64.c
@@ -6222,6 +6222,12 @@ static void handle_2misc_64(DisasContext *s, int opcode, bool u,
TCGCond cond;
switch (opcode) {
+ case 0x5: /* NOT */
+ /* This opcode is shared with CNT and RBIT but we have earlier
+ * enforced that size == 3 if and only if this is the NOT insn.
+ */
+ tcg_gen_not_i64(tcg_rd, tcg_rn);
+ break;
case 0xa: /* CMLT */
/* 64 bit integer comparison against zero, result is
* test ? (2^64 - 1) : 0. We implement via setcond(!test) and
@@ -7385,13 +7391,19 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
case 0x1: /* REV16 */
unsupported_encoding(s, insn);
return;
- case 0x5: /* CNT, NOT, RBIT */
- if ((u == 0 && size > 0) ||
- (u == 1 && size > 1)) {
- unallocated_encoding(s);
- return;
+ case 0x5: /* CNT, NOT, RBIT */
+ if (u && size == 0) {
+ /* NOT: adjust size so we can use the 64-bits-at-a-time loop. */
+ size = 3;
+ break;
+ } else if (u && size == 1) {
+ /* RBIT */
+ break;
+ } else if (!u && size == 0) {
+ /* CNT */
+ break;
}
- unsupported_encoding(s, insn);
+ unallocated_encoding(s);
return;
case 0x2: /* SADDLP, UADDLP */
case 0x4: /* CLS, CLZ */
@@ -7553,6 +7565,16 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
} else {
/* Use helpers for 8 and 16 bit elements */
switch (opcode) {
+ case 0x5: /* CNT, RBIT */
+ /* For these two insns size is part of the opcode specifier
+ * (handled earlier); they always operate on byte elements.
+ */
+ if (u) {
+ gen_helper_neon_rbit_u8(tcg_res, tcg_op);
+ } else {
+ gen_helper_neon_cnt_u8(tcg_res, tcg_op);
+ }
+ break;
case 0x8: /* CMGT, CMGE */
case 0x9: /* CMEQ, CMLE */
case 0xa: /* CMLT */
--
1.8.5
next prev parent reply other threads:[~2014-02-01 23:00 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-01 22:59 [Qemu-devel] [PATCH v2 00/13] A64: Add Neon instructions, third set Peter Maydell
2014-02-01 22:59 ` [Qemu-devel] [PATCH v2 01/13] target-arm: A64: Implement SIMD 3-reg-same shift and saturate insns Peter Maydell
2014-02-01 22:59 ` [Qemu-devel] [PATCH v2 02/13] target-arm: A64: Implement remaining non-pairwise int SIMD 3-reg-same insns Peter Maydell
2014-02-03 21:21 ` Richard Henderson
2014-02-01 22:59 ` [Qemu-devel] [PATCH v2 03/13] target-arm: A64: Implement pairwise integer ops from 3-reg-same SIMD Peter Maydell
2014-02-01 22:59 ` [Qemu-devel] [PATCH v2 04/13] tcg: Add TCGV_UNUSED_PTR, TCGV_IS_UNUSED_PTR, TCGV_EQUAL_PTR Peter Maydell
2014-02-01 22:59 ` [Qemu-devel] [PATCH v2 05/13] target-arm: A64: Implement scalar pairwise ops Peter Maydell
2014-02-01 23:00 ` [Qemu-devel] [PATCH v2 06/13] target-arm: A64: Implement remaining integer scalar-3-same insns Peter Maydell
2014-02-01 23:00 ` [Qemu-devel] [PATCH v2 07/13] target-arm: A64: Add SIMD simple 64 bit insns from scalar 2-reg misc Peter Maydell
2014-02-01 23:00 ` [Qemu-devel] [PATCH v2 08/13] target-arm: A64: Add skeleton decode for SIMD 2-reg misc group Peter Maydell
2014-02-01 23:00 ` [Qemu-devel] [PATCH v2 09/13] target-arm: A64: Implement 2-register misc compares, ABS, NEG Peter Maydell
2014-02-01 23:00 ` Peter Maydell [this message]
2014-02-01 23:00 ` [Qemu-devel] [PATCH v2 11/13] target-arm: A64: Add narrowing 2-reg-misc instructions Peter Maydell
2014-02-01 23:00 ` [Qemu-devel] [PATCH v2 12/13] target-arm: A64: Add 2-reg-misc REV* instructions Peter Maydell
2014-02-03 21:23 ` Richard Henderson
2014-02-01 23:00 ` [Qemu-devel] [PATCH v2 13/13] target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc group Peter Maydell
2014-02-03 23:34 ` [Qemu-devel] [PATCH v2 00/13] A64: Add Neon instructions, third set Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1391295607-1426-11-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=agraf@suse.de \
--cc=alex.bennee@linaro.org \
--cc=christoffer.dall@linaro.org \
--cc=claudio.fontana@linaro.org \
--cc=dmueller@suse.de \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=laurent.desnogues@gmail.com \
--cc=matz@suse.de \
--cc=patches@linaro.org \
--cc=peter.crosthwaite@xilinx.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=will.newton@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).