qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: Anthony Liguori <aliguori@amazon.com>
Cc: Blue Swirl <blauwirbel@gmail.com>,
	qemu-devel@nongnu.org, Aurelien Jarno <aurelien@aurel32.net>
Subject: [Qemu-devel] [PULL 09/29] target-arm: A64: Implement 2-register misc compares, ABS, NEG
Date: Sat,  8 Feb 2014 15:57:44 +0000	[thread overview]
Message-ID: <1391875084-12772-10-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1391875084-12772-1-git-send-email-peter.maydell@linaro.org>

Implement the simple 2-register-misc operations we can share
with the scalar-two-register-misc code. (SUQADD, USQADD, SQABS,
SQNEG also fall into this category, but aren't implemented in
the scalar-2-register case yet either.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
 target-arm/translate-a64.c | 136 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 134 insertions(+), 2 deletions(-)

diff --git a/target-arm/translate-a64.c b/target-arm/translate-a64.c
index b0011da..c071663 100644
--- a/target-arm/translate-a64.c
+++ b/target-arm/translate-a64.c
@@ -7377,6 +7377,8 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
     int opcode = extract32(insn, 12, 5);
     bool u = extract32(insn, 29, 1);
     bool is_q = extract32(insn, 30, 1);
+    int rn = extract32(insn, 5, 5);
+    int rd = extract32(insn, 0, 5);
 
     switch (opcode) {
     case 0x0: /* REV64, REV32 */
@@ -7415,8 +7417,6 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
             return;
         }
         /* fall through */
-    case 0x3: /* SUQADD, USQADD */
-    case 0x7: /* SQABS, SQNEG */
     case 0x8: /* CMGT, CMGE */
     case 0x9: /* CMEQ, CMLE */
     case 0xb: /* ABS, NEG */
@@ -7424,6 +7424,13 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
             unallocated_encoding(s);
             return;
         }
+        break;
+    case 0x3: /* SUQADD, USQADD */
+    case 0x7: /* SQABS, SQNEG */
+        if (size == 3 && !is_q) {
+            unallocated_encoding(s);
+            return;
+        }
         unsupported_encoding(s, insn);
         return;
     case 0xc ... 0xf:
@@ -7482,6 +7489,131 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
         unallocated_encoding(s);
         return;
     }
+
+    if (size == 3) {
+        /* All 64-bit element operations can be shared with scalar 2misc */
+        int pass;
+
+        for (pass = 0; pass < (is_q ? 2 : 1); pass++) {
+            TCGv_i64 tcg_op = tcg_temp_new_i64();
+            TCGv_i64 tcg_res = tcg_temp_new_i64();
+
+            read_vec_element(s, tcg_op, rn, pass, MO_64);
+
+            handle_2misc_64(s, opcode, u, tcg_res, tcg_op);
+
+            write_vec_element(s, tcg_res, rd, pass, MO_64);
+
+            tcg_temp_free_i64(tcg_res);
+            tcg_temp_free_i64(tcg_op);
+        }
+    } else {
+        int pass;
+
+        for (pass = 0; pass < (is_q ? 4 : 2); pass++) {
+            TCGv_i32 tcg_op = tcg_temp_new_i32();
+            TCGv_i32 tcg_res = tcg_temp_new_i32();
+            TCGCond cond;
+
+            read_vec_element_i32(s, tcg_op, rn, pass, MO_32);
+
+            if (size == 2) {
+                /* Special cases for 32 bit elements */
+                switch (opcode) {
+                case 0xa: /* CMLT */
+                    /* 32 bit integer comparison against zero, result is
+                     * test ? (2^32 - 1) : 0. We implement via setcond(test)
+                     * and inverting.
+                     */
+                    cond = TCG_COND_LT;
+                do_cmop:
+                    tcg_gen_setcondi_i32(cond, tcg_res, tcg_op, 0);
+                    tcg_gen_neg_i32(tcg_res, tcg_res);
+                    break;
+                case 0x8: /* CMGT, CMGE */
+                    cond = u ? TCG_COND_GE : TCG_COND_GT;
+                    goto do_cmop;
+                case 0x9: /* CMEQ, CMLE */
+                    cond = u ? TCG_COND_LE : TCG_COND_EQ;
+                    goto do_cmop;
+                case 0xb: /* ABS, NEG */
+                    if (u) {
+                        tcg_gen_neg_i32(tcg_res, tcg_op);
+                    } else {
+                        TCGv_i32 tcg_zero = tcg_const_i32(0);
+                        tcg_gen_neg_i32(tcg_res, tcg_op);
+                        tcg_gen_movcond_i32(TCG_COND_GT, tcg_res, tcg_op,
+                                            tcg_zero, tcg_op, tcg_res);
+                        tcg_temp_free_i32(tcg_zero);
+                    }
+                    break;
+                default:
+                    g_assert_not_reached();
+                }
+            } else {
+                /* Use helpers for 8 and 16 bit elements */
+                switch (opcode) {
+                case 0x8: /* CMGT, CMGE */
+                case 0x9: /* CMEQ, CMLE */
+                case 0xa: /* CMLT */
+                {
+                    static NeonGenTwoOpFn * const fns[3][2] = {
+                        { gen_helper_neon_cgt_s8, gen_helper_neon_cgt_s16 },
+                        { gen_helper_neon_cge_s8, gen_helper_neon_cge_s16 },
+                        { gen_helper_neon_ceq_u8, gen_helper_neon_ceq_u16 },
+                    };
+                    NeonGenTwoOpFn *genfn;
+                    int comp;
+                    bool reverse;
+                    TCGv_i32 tcg_zero = tcg_const_i32(0);
+
+                    /* comp = index into [CMGT, CMGE, CMEQ, CMLE, CMLT] */
+                    comp = (opcode - 0x8) * 2 + u;
+                    /* ...but LE, LT are implemented as reverse GE, GT */
+                    reverse = (comp > 2);
+                    if (reverse) {
+                        comp = 4 - comp;
+                    }
+                    genfn = fns[comp][size];
+                    if (reverse) {
+                        genfn(tcg_res, tcg_zero, tcg_op);
+                    } else {
+                        genfn(tcg_res, tcg_op, tcg_zero);
+                    }
+                    tcg_temp_free_i32(tcg_zero);
+                    break;
+                }
+                case 0xb: /* ABS, NEG */
+                    if (u) {
+                        TCGv_i32 tcg_zero = tcg_const_i32(0);
+                        if (size) {
+                            gen_helper_neon_sub_u16(tcg_res, tcg_zero, tcg_op);
+                        } else {
+                            gen_helper_neon_sub_u8(tcg_res, tcg_zero, tcg_op);
+                        }
+                        tcg_temp_free_i32(tcg_zero);
+                    } else {
+                        if (size) {
+                            gen_helper_neon_abs_s16(tcg_res, tcg_op);
+                        } else {
+                            gen_helper_neon_abs_s8(tcg_res, tcg_op);
+                        }
+                    }
+                    break;
+                default:
+                    g_assert_not_reached();
+                }
+            }
+
+            write_vec_element_i32(s, tcg_res, rd, pass, MO_32);
+
+            tcg_temp_free_i32(tcg_res);
+            tcg_temp_free_i32(tcg_op);
+        }
+    }
+    if (!is_q) {
+        clear_vec_high(s, rd);
+    }
 }
 
 /* C3.6.18 AdvSIMD vector x indexed element
-- 
1.8.5

  parent reply	other threads:[~2014-02-08 15:58 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-08 15:57 [Qemu-devel] [PULL 00/29] target-arm queue Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 01/29] target-arm: A64: Implement SIMD 3-reg-same shift and saturate insns Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 02/29] target-arm: A64: Implement remaining non-pairwise int SIMD 3-reg-same insns Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 03/29] target-arm: A64: Implement pairwise integer ops from 3-reg-same SIMD Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 04/29] tcg: Add TCGV_UNUSED_PTR, TCGV_IS_UNUSED_PTR, TCGV_EQUAL_PTR Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 05/29] target-arm: A64: Implement scalar pairwise ops Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 06/29] target-arm: A64: Implement remaining integer scalar-3-same insns Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 07/29] target-arm: A64: Add SIMD simple 64 bit insns from scalar 2-reg misc Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 08/29] target-arm: A64: Add skeleton decode for SIMD 2-reg misc group Peter Maydell
2014-02-08 15:57 ` Peter Maydell [this message]
2014-02-08 15:57 ` [Qemu-devel] [PULL 10/29] target-arm: A64: Implement 2-reg-misc CNT, NOT and RBIT Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 11/29] target-arm: A64: Add narrowing 2-reg-misc instructions Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 12/29] target-arm: A64: Add 2-reg-misc REV* instructions Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 13/29] target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc group Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 14/29] target-arm: Add support for AArch32 64bit VCVTB and VCVTT Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 15/29] arm_gic: Fix GIC pending behavior Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 16/29] arm_gic: Keep track of SGI sources Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 17/29] arm_gic: Support setting/getting binary point reg Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 18/29] vmstate: Add uint32 2D-array support Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 19/29] arm_gic: Add GICC_APRn state to the GICState Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 20/29] rules.mak: Support .cc as a C++ source file suffix Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 21/29] rules.mak: Link with C++ if we have a C++ compiler Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 22/29] disas: Add subset of libvixl sources for A64 disassembler Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 23/29] disas/libvixl: Fix upstream libvixl compilation issues Peter Maydell
2014-02-08 15:57 ` [Qemu-devel] [PULL 24/29] disas: Implement disassembly output for A64 Peter Maydell
2014-02-08 15:58 ` [Qemu-devel] [PULL 25/29] util/fifo8: implement push/pop of multiple bytes Peter Maydell
2014-02-08 15:58 ` [Qemu-devel] [PULL 26/29] util/fifo8: clear fifo head upon reset Peter Maydell
2014-02-08 15:58 ` [Qemu-devel] [PULL 27/29] hw/net: add support for Allwinner EMAC Fast Ethernet controller Peter Maydell
2014-02-08 15:58 ` [Qemu-devel] [PULL 28/29] hw/arm/allwinner-a10: initialize EMAC Peter Maydell
2014-02-08 15:58 ` [Qemu-devel] [PULL 29/29] arm/zynq: Add software system reset via SCLR Peter Maydell
2014-02-11 11:59 ` [Qemu-devel] [PULL 00/29] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1391875084-12772-10-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=aliguori@amazon.com \
    --cc=aurelien@aurel32.net \
    --cc=blauwirbel@gmail.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).