From: Michael Roth <mdroth@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: lersek@redhat.com, qemu-stable@nongnu.org, Petar.Jovanovic@imgtec.com
Subject: [Qemu-devel] Patch Round-up for stable 1.7.1, freeze on 2013-02-27
Date: Fri, 21 Feb 2014 02:16:36 -0600 [thread overview]
Message-ID: <1392970647-21528-1-git-send-email-mdroth@linux.vnet.ibm.com> (raw)
Hi everyone,
The following new patches are queued for QEMU stable v1.7.1:
https://github.com/mdroth/qemu/commits/stable-1.7-staging
The release is planned for 2014-03-03:
http://wiki.qemu.org/Planning/1.7
Please respond here or CC qemu-stable@nongnu.org on any patches you
think should be included in the release. The cut-off date has
been extended to 2013-02-27 due to the round-up email going
out late.
Testing/feedback is greatly appreciated.
Thanks!
Alex Williamson (1):
vfio-pci: Release all MSI-X vectors when disabled
Alexander Graf (1):
x86: only allow real mode to access 32bit without LMA
Aurelien Jarno (1):
tcg/optimize: fix known-zero bits for right shift ops
Brad (1):
Fix QEMU build on OpenBSD on x86 archs
Corey Bryant (1):
seccomp: exit if seccomp_init() fails
Cornelia Huck (1):
s390x/kvm: Fix diagnose handling.
Eric Farman (2):
virtio-scsi: Cleanup of I/Os that never started
virtio-scsi: Prevent assertion on missed events
Gerd Hoffmann (2):
intel-hda: fix position buffer
piix: fix 32bit pci hole
Huw Davies (1):
tcg-arm: The shift count of op_rotl_i32 is in args[2] not args[1].
Laszlo Ersek (1):
qemu_opts_parse(): always check return value
Luiz Capitulino (1):
migration: qmp_migrate(): keep working after syntax error
Marcel Apfelbaum (2):
memory.c: bugfix - ref counting mismatch in memory_region_find
exec: separate sections and nodes per address space
Mark Cave-Ayland (1):
Update OpenBIOS images
Markus Armbruster (1):
qdev-monitor: Avoid device_add crashing on non-device driver name
Matthew Garrett (1):
migration: Fix rate limit
Michael S. Tsirkin (4):
exec: replace leaf with skip
exec: pass hw address to phys_page_find
pc: map PCI address space as catchall region for not mapped addresses
hpet: fix build with CONFIG_HPET off
Paolo Bonzini (19):
virtio-ccw: move virtio_ccw_stop_ioeventfd to virtio_ccw_busdev_unplug
virtio-bus: remove vdev field
virtio-ccw: remove vdev field
virtio-pci: remove vdev field
virtio-bus: cleanup plug/unplug interface
virtio-blk: switch exit callback to VirtioDeviceClass
virtio-serial: switch exit callback to VirtioDeviceClass
virtio-net: switch exit callback to VirtioDeviceClass
virtio-scsi: switch exit callback to VirtioDeviceClass
virtio-balloon: switch exit callback to VirtioDeviceClass
virtio-rng: switch exit callback to VirtioDeviceClass
virtio-pci: add device_unplugged callback
scsi-bus: fix transfer length and direction for VERIFY command
scsi-disk: fix VERIFY emulation
vl: add missing transition debug->finish_migrate
split definitions for exec.c and translate-all.c radix trees
scsi: Support TEST UNIT READY in the dummy LUN0
scsi: Assign cancel_io vector for scsi_disk_emulate_ops
memory: fix limiting of translation at a page boundary
Petar Jovanovic (3):
target-mips: fix 64-bit FPU config for user-mode emulation
linux-user: pass correct parameter to do_shmctl()
linux-user: create target_structs header to place ipc_perm and shmid_ds
Peter Crosthwaite (1):
qom: Split out object and class caches
Peter Lieven (1):
block/iscsi: use a bh to schedule co reentrance
Peter Maydell (1):
block/curl: Implement the libcurl timer callback interface
Stefan Weil (3):
mainstone: Fix duplicate array values for key 'space'
i386: Add missing include file for QEMU_PACKED
linux-user: Fix trampoline code for CRIS
thomas knych (1):
KVM: Retry KVM_CREATE_VM on EINTR
block/curl.c | 81 +++++++++--
block/iscsi.c | 11 +-
configure | 7 +
exec.c | 230 ++++++++++++++++----------------
hw/arm/mainstone.c | 13 +-
hw/audio/intel-hda.c | 1 +
hw/block/virtio-blk.c | 10 +-
hw/char/virtio-serial-bus.c | 10 +-
hw/i386/bios-linker-loader.c | 3 +-
hw/i386/pc.c | 20 +--
hw/i386/pc_piix.c | 1 -
hw/misc/vfio.c | 12 ++
hw/net/virtio-net.c | 11 +-
hw/pci-host/piix.c | 37 +----
hw/pci-host/q35.c | 27 +---
hw/s390x/virtio-ccw.c | 83 +++++++-----
hw/s390x/virtio-ccw.h | 1 -
hw/scsi/scsi-bus.c | 16 ++-
hw/scsi/scsi-disk.c | 27 +++-
hw/scsi/vhost-scsi.c | 11 +-
hw/scsi/virtio-scsi.c | 21 +--
hw/timer/hpet.c | 6 -
hw/virtio/virtio-balloon.c | 10 +-
hw/virtio/virtio-bus.c | 80 ++++++-----
hw/virtio/virtio-mmio.c | 9 +-
hw/virtio/virtio-pci.c | 122 ++++++++++-------
hw/virtio/virtio-pci.h | 1 -
hw/virtio/virtio-rng.c | 10 +-
hw/virtio/virtio.c | 7 +-
include/hw/i386/pc.h | 15 +--
include/hw/pci-host/q35.h | 2 -
include/hw/timer/hpet.h | 10 +-
include/hw/virtio/virtio-bus.h | 22 ++-
include/hw/virtio/virtio-scsi.h | 2 +-
include/hw/virtio/virtio.h | 1 +
include/qom/object.h | 3 +-
kvm-all.c | 12 +-
linux-user/aarch64/target_structs.h | 58 ++++++++
linux-user/alpha/target_structs.h | 48 +++++++
linux-user/arm/target_structs.h | 52 ++++++++
linux-user/cris/target_structs.h | 58 ++++++++
linux-user/i386/target_structs.h | 58 ++++++++
linux-user/m68k/target_structs.h | 58 ++++++++
linux-user/microblaze/target_structs.h | 58 ++++++++
linux-user/mips/target_structs.h | 48 +++++++
linux-user/mips64/target_cpu.h | 18 +++
linux-user/mips64/target_structs.h | 2 +
linux-user/openrisc/target_structs.h | 58 ++++++++
linux-user/ppc/target_structs.h | 60 +++++++++
linux-user/qemu.h | 1 +
linux-user/s390x/target_structs.h | 63 +++++++++
linux-user/sh4/target_structs.h | 58 ++++++++
linux-user/signal.c | 8 +-
linux-user/sparc/target_structs.h | 63 +++++++++
linux-user/sparc64/target_structs.h | 58 ++++++++
linux-user/syscall.c | 78 ++++-------
linux-user/unicore32/target_structs.h | 58 ++++++++
linux-user/x86_64/target_structs.h | 58 ++++++++
memory.c | 1 +
migration.c | 3 +-
pc-bios/QEMU,tcx.bin | Bin 1242 -> 1410 bytes
pc-bios/README | 2 +-
pc-bios/openbios-ppc | Bin 729880 -> 729912 bytes
pc-bios/openbios-sparc32 | Bin 381488 -> 381512 bytes
pc-bios/openbios-sparc64 | Bin 1598328 -> 1598376 bytes
pc-bios/optionrom/Makefile | 3 +-
qdev-monitor.c | 2 +-
qemu-seccomp.c | 1 +
qom/object.c | 13 +-
roms/openbios | 2 +-
target-i386/helper.c | 6 +
target-mips/translate.c | 7 +-
target-s390x/cpu.h | 3 +
target-s390x/kvm.c | 19 ++-
tcg/arm/tcg-target.c | 2 +-
tcg/optimize.c | 19 ++-
translate-all.c | 32 +++--
translate-all.h | 7 -
vl.c | 8 +-
79 files changed, 1583 insertions(+), 513 deletions(-)
create mode 100644 linux-user/aarch64/target_structs.h
create mode 100644 linux-user/alpha/target_structs.h
create mode 100644 linux-user/arm/target_structs.h
create mode 100644 linux-user/cris/target_structs.h
create mode 100644 linux-user/i386/target_structs.h
create mode 100644 linux-user/m68k/target_structs.h
create mode 100644 linux-user/microblaze/target_structs.h
create mode 100644 linux-user/mips/target_structs.h
create mode 100644 linux-user/mips64/target_structs.h
create mode 100644 linux-user/openrisc/target_structs.h
create mode 100644 linux-user/ppc/target_structs.h
create mode 100644 linux-user/s390x/target_structs.h
create mode 100644 linux-user/sh4/target_structs.h
create mode 100644 linux-user/sparc/target_structs.h
create mode 100644 linux-user/sparc64/target_structs.h
create mode 100644 linux-user/unicore32/target_structs.h
create mode 100644 linux-user/x86_64/target_structs.h
next reply other threads:[~2014-02-21 8:18 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-21 8:16 Michael Roth [this message]
2014-02-21 8:16 ` [Qemu-devel] [PATCH 01/51] virtio-ccw: move virtio_ccw_stop_ioeventfd to virtio_ccw_busdev_unplug Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 02/51] virtio-bus: remove vdev field Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 03/51] virtio-ccw: " Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 04/51] virtio-pci: " Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 05/51] virtio-bus: cleanup plug/unplug interface Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 06/51] virtio-blk: switch exit callback to VirtioDeviceClass Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 07/51] virtio-serial: " Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 08/51] virtio-net: " Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 09/51] virtio-scsi: " Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 10/51] virtio-balloon: " Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 11/51] virtio-rng: " Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 12/51] virtio-pci: add device_unplugged callback Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 13/51] scsi-bus: fix transfer length and direction for VERIFY command Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 14/51] scsi-disk: fix VERIFY emulation Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 15/51] intel-hda: fix position buffer Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 16/51] memory.c: bugfix - ref counting mismatch in memory_region_find Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 17/51] qom: Split out object and class caches Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 18/51] migration: Fix rate limit Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 19/51] vl: add missing transition debug->finish_migrate Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 20/51] x86: only allow real mode to access 32bit without LMA Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 21/51] qdev-monitor: Avoid device_add crashing on non-device driver name Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 22/51] split definitions for exec.c and translate-all.c radix trees Michael Roth
2014-02-21 8:16 ` [Qemu-devel] [PATCH 23/51] exec: replace leaf with skip Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 24/51] exec: pass hw address to phys_page_find Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 25/51] exec: separate sections and nodes per address space Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 26/51] pc: map PCI address space as catchall region for not mapped addresses Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 27/51] piix: fix 32bit pci hole Michael Roth
2014-02-21 14:15 ` Laszlo Ersek
2014-02-21 8:17 ` [Qemu-devel] [PATCH 28/51] target-mips: fix 64-bit FPU config for user-mode emulation Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 29/51] linux-user: pass correct parameter to do_shmctl() Michael Roth
2014-02-21 9:58 ` Laurent Vivier
2014-02-21 20:14 ` Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 30/51] linux-user: create target_structs header to place ipc_perm and shmid_ds Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 31/51] Fix QEMU build on OpenBSD on x86 archs Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 32/51] tcg/optimize: fix known-zero bits for right shift ops Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 33/51] hpet: fix build with CONFIG_HPET off Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 34/51] block/iscsi: use a bh to schedule co reentrance Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 35/51] qemu_opts_parse(): always check return value Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 36/51] s390x/kvm: Fix diagnose handling Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 37/51] seccomp: exit if seccomp_init() fails Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 38/51] mainstone: Fix duplicate array values for key 'space' Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 39/51] migration: qmp_migrate(): keep working after syntax error Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 40/51] vfio-pci: Release all MSI-X vectors when disabled Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 41/51] block/curl: Implement the libcurl timer callback interface Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 42/51] scsi: Support TEST UNIT READY in the dummy LUN0 Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 43/51] scsi: Assign cancel_io vector for scsi_disk_emulate_ops Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 44/51] virtio-scsi: Cleanup of I/Os that never started Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 45/51] virtio-scsi: Prevent assertion on missed events Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 46/51] KVM: Retry KVM_CREATE_VM on EINTR Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 47/51] i386: Add missing include file for QEMU_PACKED Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 48/51] linux-user: Fix trampoline code for CRIS Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 50/51] memory: fix limiting of translation at a page boundary Michael Roth
2014-02-21 8:17 ` [Qemu-devel] [PATCH 51/51] tcg-arm: The shift count of op_rotl_i32 is in args[2] not args[1] Michael Roth
2014-02-21 10:23 ` [Qemu-devel] Patch Round-up for stable 1.7.1, freeze on 2013-02-27 Paolo Bonzini
2014-03-04 17:04 ` Laszlo Ersek
2014-03-04 17:46 ` Petar Jovanovic
2014-03-04 17:54 ` Michael Roth
2014-03-12 10:53 ` [Qemu-devel] [Qemu-stable] " Michael Tokarev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392970647-21528-1-git-send-email-mdroth@linux.vnet.ibm.com \
--to=mdroth@linux.vnet.ibm.com \
--cc=Petar.Jovanovic@imgtec.com \
--cc=lersek@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-stable@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).