From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Anthony Liguori <aliguori@amazon.com>
Subject: [Qemu-devel] [PULL 01/11] opencores_eth: flush queue whenever can_receive can go from false to true
Date: Tue, 25 Feb 2014 14:33:39 +0100 [thread overview]
Message-ID: <1393335229-607-2-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1393335229-607-1-git-send-email-stefanha@redhat.com>
From: Max Filippov <jcmvbkbc@gmail.com>
The following registers control whether MAC can receive frames:
- MODER.RXEN bit that enables/disables receiver;
- TX_BD_NUM register that specifies number of RX descriptors.
Notify QEMU networking core when the MAC is ready to receive frames.
Discard frame and raise BUSY interrupt when the frame arrives but the
current RX descriptor is not empty.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
hw/net/opencores_eth.c | 33 +++++++++++++++++++++++++++++++--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/hw/net/opencores_eth.c b/hw/net/opencores_eth.c
index 4118d54..4a44304 100644
--- a/hw/net/opencores_eth.c
+++ b/hw/net/opencores_eth.c
@@ -169,6 +169,7 @@ enum {
};
enum {
+ INT_SOURCE_BUSY = 0x10,
INT_SOURCE_RXB = 0x4,
INT_SOURCE_TXB = 0x1,
};
@@ -351,8 +352,7 @@ static int open_eth_can_receive(NetClientState *nc)
OpenEthState *s = qemu_get_nic_opaque(nc);
return GET_REGBIT(s, MODER, RXEN) &&
- (s->regs[TX_BD_NUM] < 0x80) &&
- (rx_desc(s)->len_flags & RXD_E);
+ (s->regs[TX_BD_NUM] < 0x80);
}
static ssize_t open_eth_receive(NetClientState *nc,
@@ -402,6 +402,12 @@ static ssize_t open_eth_receive(NetClientState *nc,
desc *desc = rx_desc(s);
size_t copy_size = GET_REGBIT(s, MODER, HUGEN) ? 65536 : maxfl;
+ if (!(desc->len_flags & RXD_E)) {
+ open_eth_int_source_write(s,
+ s->regs[INT_SOURCE] | INT_SOURCE_BUSY);
+ return size;
+ }
+
desc->len_flags &= ~(RXD_CF | RXD_M | RXD_OR |
RXD_IS | RXD_DN | RXD_TL | RXD_SF | RXD_CRC | RXD_LC);
@@ -551,6 +557,15 @@ static uint64_t open_eth_reg_read(void *opaque,
return v;
}
+static void open_eth_notify_can_receive(OpenEthState *s)
+{
+ NetClientState *nc = qemu_get_queue(s->nic);
+
+ if (open_eth_can_receive(nc)) {
+ qemu_flush_queued_packets(nc);
+ }
+}
+
static void open_eth_ro(OpenEthState *s, uint32_t val)
{
}
@@ -567,6 +582,7 @@ static void open_eth_moder_host_write(OpenEthState *s, uint32_t val)
if (set & MODER_RXEN) {
s->rx_desc = s->regs[TX_BD_NUM];
+ open_eth_notify_can_receive(s);
}
if (set & MODER_TXEN) {
s->tx_desc = 0;
@@ -592,6 +608,18 @@ static void open_eth_int_mask_host_write(OpenEthState *s, uint32_t val)
s->regs[INT_SOURCE] & s->regs[INT_MASK]);
}
+static void open_eth_tx_bd_num_host_write(OpenEthState *s, uint32_t val)
+{
+ if (val < 0x80) {
+ bool enable = s->regs[TX_BD_NUM] == 0x80;
+
+ s->regs[TX_BD_NUM] = val;
+ if (enable) {
+ open_eth_notify_can_receive(s);
+ }
+ }
+}
+
static void open_eth_mii_command_host_write(OpenEthState *s, uint32_t val)
{
unsigned fiad = GET_REGFIELD(s, MIIADDRESS, FIAD);
@@ -630,6 +658,7 @@ static void open_eth_reg_write(void *opaque,
[MODER] = open_eth_moder_host_write,
[INT_SOURCE] = open_eth_int_source_host_write,
[INT_MASK] = open_eth_int_mask_host_write,
+ [TX_BD_NUM] = open_eth_tx_bd_num_host_write,
[MIICOMMAND] = open_eth_mii_command_host_write,
[MIITX_DATA] = open_eth_mii_tx_host_write,
[MIISTATUS] = open_eth_ro,
--
1.8.5.3
next prev parent reply other threads:[~2014-02-25 13:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-25 13:33 [Qemu-devel] [PULL 00/11] Net patches Stefan Hajnoczi
2014-02-25 13:33 ` Stefan Hajnoczi [this message]
2014-02-25 13:33 ` [Qemu-devel] [PULL 02/11] net: change vnet-hdr TAP prototypes Stefan Hajnoczi
2014-02-25 13:33 ` [Qemu-devel] [PULL 03/11] net: extend NetClientInfo for offloading Stefan Hajnoczi
2014-02-25 13:33 ` [Qemu-devel] [PULL 04/11] net: TAP uses NetClientInfo offloading callbacks Stefan Hajnoczi
2014-02-25 13:33 ` [Qemu-devel] [PULL 05/11] net: virtio-net and vmxnet3 use offloading API Stefan Hajnoczi
2014-02-25 13:33 ` [Qemu-devel] [PULL 06/11] net: make tap offloading callbacks static Stefan Hajnoczi
2014-02-25 13:33 ` [Qemu-devel] [PULL 07/11] net: add offloading support to netmap backend Stefan Hajnoczi
2014-02-25 13:33 ` [Qemu-devel] [PULL 08/11] net: Disable netmap backend when not supported Stefan Hajnoczi
2014-02-25 13:33 ` [Qemu-devel] [PULL 09/11] net: remove implicit peer from offload API Stefan Hajnoczi
2014-02-25 13:33 ` [Qemu-devel] [PULL 10/11] vhost_net: use offload API instead of bypassing it Stefan Hajnoczi
2014-02-25 13:33 ` [Qemu-devel] [PULL 11/11] virtio-net: use qemu_get_queue() where possible Stefan Hajnoczi
2014-02-26 20:52 ` [Qemu-devel] [PULL 00/11] Net patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393335229-607-2-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=aliguori@amazon.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).