qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Fam Zheng <famz@redhat.com>, qemu-stable@nongnu.org
Subject: [Qemu-devel] [PULL 1/7] scsi: Change scsi sense buf size to 252
Date: Thu, 27 Feb 2014 17:55:20 +0100	[thread overview]
Message-ID: <1393520126-13703-2-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1393520126-13703-1-git-send-email-pbonzini@redhat.com>

From: Fam Zheng <famz@redhat.com>

Current buffer size fails the assersion check in like

    hw/scsi/scsi-bus.c:1655:    assert(req->sense_len <= sizeof(req->sense));

when backend (block/iscsi.c) returns more data then 96.

Exercise the core dump path by booting an Gentoo ISO with scsi-generic
device backed with iscsi (built with libiscsi 1.7.0):

    x86_64-softmmu/qemu-system-x86_64 \
    -drive file=iscsi://localhost:3260/iqn.foobar/0,if=none,id=drive-disk \
    -device virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x6 \
    -device scsi-generic,drive=drive-disk,bus=scsi1.0,id=iscsi-disk \
    -boot d \
    -cdrom gentoo.iso

    qemu-system-x86_64: hw/scsi/scsi-bus.c:1655: scsi_req_complete:
    Assertion `req->sense_len <= sizeof(req->sense)' failed.

According to SPC-4, section 4.5.2.1, 252 is the limit of sense data. So
increase the value to fix it.

Also remove duplicated define for the macro.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi/scsi-generic.c | 2 --
 hw/scsi/spapr_vscsi.c  | 1 -
 include/hw/scsi/scsi.h | 2 +-
 3 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/hw/scsi/scsi-generic.c b/hw/scsi/scsi-generic.c
index f08b64e..8d92e0d 100644
--- a/hw/scsi/scsi-generic.c
+++ b/hw/scsi/scsi-generic.c
@@ -37,8 +37,6 @@ do { fprintf(stderr, "scsi-generic: " fmt , ## __VA_ARGS__); } while (0)
 #include <scsi/sg.h>
 #include "block/scsi.h"
 
-#define SCSI_SENSE_BUF_SIZE 96
-
 #define SG_ERR_DRIVER_TIMEOUT  0x06
 #define SG_ERR_DRIVER_SENSE    0x08
 
diff --git a/hw/scsi/spapr_vscsi.c b/hw/scsi/spapr_vscsi.c
index c0c46d7..e8bca39 100644
--- a/hw/scsi/spapr_vscsi.c
+++ b/hw/scsi/spapr_vscsi.c
@@ -60,7 +60,6 @@
 #define VSCSI_MAX_SECTORS       4096
 #define VSCSI_REQ_LIMIT         24
 
-#define SCSI_SENSE_BUF_SIZE     96
 #define SRP_RSP_SENSE_DATA_LEN  18
 
 typedef union vscsi_crq {
diff --git a/include/hw/scsi/scsi.h b/include/hw/scsi/scsi.h
index bf6da3d..ca66454 100644
--- a/include/hw/scsi/scsi.h
+++ b/include/hw/scsi/scsi.h
@@ -31,7 +31,7 @@ typedef struct SCSISense {
     uint8_t ascq;
 } SCSISense;
 
-#define SCSI_SENSE_BUF_SIZE 96
+#define SCSI_SENSE_BUF_SIZE 252
 
 struct SCSICommand {
     uint8_t buf[SCSI_CMD_BUF_SIZE];
-- 
1.8.5.3

  reply	other threads:[~2014-02-27 16:55 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-27 16:55 [Qemu-devel] [PULL 0/7] SCSI patches for 2014-02-28 Paolo Bonzini
2014-02-27 16:55 ` Paolo Bonzini [this message]
2014-02-27 16:55 ` [Qemu-devel] [PULL 2/7] scsi: report thin provisioning errors with werror=report Paolo Bonzini
2014-02-27 16:55 ` [Qemu-devel] [PULL 3/7] scsi-bus: Fix transfer length for VERIFY with BYTCHK=11b Paolo Bonzini
2014-02-27 16:55 ` [Qemu-devel] [PULL 4/7] block/iscsi: fix deadlock on scsi check condition Paolo Bonzini
2014-02-27 16:55 ` [Qemu-devel] [PULL 5/7] block/iscsi: query for supported VPD pages Paolo Bonzini
2014-02-27 16:55 ` [Qemu-devel] [PULL 6/7] scsi-disk: Add support for port WWN and index descriptors in VPD page 83h Paolo Bonzini
2014-02-27 16:55 ` [Qemu-devel] [PULL 7/7] block/iscsi: fix segfault if writesame fails Paolo Bonzini
2014-03-04 14:50 ` [Qemu-devel] [PULL 0/7] SCSI patches for 2014-02-28 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393520126-13703-2-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=famz@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-stable@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).