[Qemu-devel] [PATCH v2 0/3] migration: add more traces

[Qemu-devel] [PATCH v2 0/3] migration: add more traces

[Alexey Kardashevskiy]

This reworks/adds traces for migration.
v2 is rework of an original single patch with the same subject.

Alexey Kardashevskiy (3):
  vl: add system_wakeup_request tracepoint
  migration: extend section_start/end traces
  migration: add more traces

 migration.c  | 30 ++++++------------------------
 qemu-file.c  |  2 ++
 savevm.c     | 20 ++++++++++++++------
 trace-events | 21 +++++++++++++++++++--
 vl.c         |  2 ++
 vmstate.c    |  2 ++
 6 files changed, 45 insertions(+), 32 deletions(-)

-- 
1.8.4.rc4

[Qemu-devel] [PATCH v2 1/3] vl: add system_wakeup_request tracepoint

[Alexey Kardashevskiy]

It might be useful for tracing migration.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 trace-events | 1 +
 vl.c         | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/trace-events b/trace-events
index 3713063..dbbaa04 100644
--- a/trace-events
+++ b/trace-events
@@ -486,6 +486,7 @@ runstate_set(int new_state) "new state %d"
 g_malloc(size_t size, void *ptr) "size %zu ptr %p"
 g_realloc(void *ptr, size_t size, void *newptr) "ptr %p size %zu newptr %p"
 g_free(void *ptr) "ptr %p"
+system_wakeup_request(int reason) "reason=%d"
 
 # block/qcow2.c
 qcow2_writev_start_req(void *co, int64_t sector, int nb_sectors) "co %p sector %" PRIx64 " nb_sectors %d"
diff --git a/vl.c b/vl.c
index 1d27b34..179f14e 100644
--- a/vl.c
+++ b/vl.c
@@ -1837,6 +1837,8 @@ void qemu_register_suspend_notifier(Notifier *notifier)
 
 void qemu_system_wakeup_request(WakeupReason reason)
 {
+    trace_system_wakeup_request(reason);
+
     if (!runstate_check(RUN_STATE_SUSPENDED)) {
         return;
     }
-- 
1.8.4.rc4

[Qemu-devel] [PATCH v2 2/3] migration: extend section_start/end traces

[Alexey Kardashevskiy]

This adds @idstr to savevm_section_start and savevm_section_end
tracepoints.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 savevm.c     | 12 ++++++------
 trace-events |  4 ++--
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/savevm.c b/savevm.c
index 7329fc5..d094fbb 100644
--- a/savevm.c
+++ b/savevm.c
@@ -527,13 +527,13 @@ int qemu_savevm_state_iterate(QEMUFile *f)
         if (qemu_file_rate_limit(f)) {
             return 0;
         }
-        trace_savevm_section_start();
+        trace_savevm_section_start(se->idstr, se->section_id);
         /* Section type */
         qemu_put_byte(f, QEMU_VM_SECTION_PART);
         qemu_put_be32(f, se->section_id);
 
         ret = se->ops->save_live_iterate(f, se->opaque);
-        trace_savevm_section_end(se->section_id);
+        trace_savevm_section_end(se->idstr, se->section_id);
 
         if (ret < 0) {
             qemu_file_set_error(f, ret);
@@ -565,13 +565,13 @@ void qemu_savevm_state_complete(QEMUFile *f)
                 continue;
             }
         }
-        trace_savevm_section_start();
+        trace_savevm_section_start(se->idstr, se->section_id);
         /* Section type */
         qemu_put_byte(f, QEMU_VM_SECTION_END);
         qemu_put_be32(f, se->section_id);
 
         ret = se->ops->save_live_complete(f, se->opaque);
-        trace_savevm_section_end(se->section_id);
+        trace_savevm_section_end(se->idstr, se->section_id);
         if (ret < 0) {
             qemu_file_set_error(f, ret);
             return;
@@ -584,7 +584,7 @@ void qemu_savevm_state_complete(QEMUFile *f)
         if ((!se->ops || !se->ops->save_state) && !se->vmsd) {
             continue;
         }
-        trace_savevm_section_start();
+        trace_savevm_section_start(se->idstr, se->section_id);
         /* Section type */
         qemu_put_byte(f, QEMU_VM_SECTION_FULL);
         qemu_put_be32(f, se->section_id);
@@ -598,7 +598,7 @@ void qemu_savevm_state_complete(QEMUFile *f)
         qemu_put_be32(f, se->version_id);
 
         vmstate_save(f, se);
-        trace_savevm_section_end(se->section_id);
+        trace_savevm_section_end(se->idstr, se->section_id);
     }
 
     qemu_put_byte(f, QEMU_VM_EOF);
diff --git a/trace-events b/trace-events
index dbbaa04..6225235 100644
--- a/trace-events
+++ b/trace-events
@@ -1031,8 +1031,8 @@ vmware_scratch_write(uint32_t index, uint32_t value) "index %d, value 0x%x"
 vmware_setmode(uint32_t w, uint32_t h, uint32_t bpp) "%dx%d @ %d bpp"
 
 # savevm.c
-savevm_section_start(void) ""
-savevm_section_end(unsigned int section_id) "section_id %u"
+savevm_section_start(const char *id, unsigned int section_id) "%s, section_id %u"
+savevm_section_end(const char *id, unsigned int section_id) "%s, section_id %u"
 
 # arch_init.c
 migration_bitmap_sync_start(void) ""
-- 
1.8.4.rc4

[Qemu-devel] [PATCH v2 3/3] migration: add more traces

[Alexey Kardashevskiy]

This replaces DPRINTF macro with tracepoints.

This moves some messages from migration.c to savevm.c.

This adds tracepoint to signal about fileds failed to migrate.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 migration.c  | 30 ++++++------------------------
 qemu-file.c  |  2 ++
 savevm.c     |  8 ++++++++
 trace-events | 16 ++++++++++++++++
 vmstate.c    |  2 ++
 5 files changed, 34 insertions(+), 24 deletions(-)

diff --git a/migration.c b/migration.c
index 14235b2..2497c5d 100644
--- a/migration.c
+++ b/migration.c
@@ -26,16 +26,6 @@
 #include "qmp-commands.h"
 #include "trace.h"
 
-//#define DEBUG_MIGRATION
-
-#ifdef DEBUG_MIGRATION
-#define DPRINTF(fmt, ...) \
-    do { printf("migration: " fmt, ## __VA_ARGS__); } while (0)
-#else
-#define DPRINTF(fmt, ...) \
-    do { } while (0)
-#endif
-
 enum {
     MIG_STATE_ERROR = -1,
     MIG_STATE_NONE,
@@ -111,7 +101,6 @@ static void process_incoming_migration_co(void *opaque)
         exit(EXIT_FAILURE);
     }
     qemu_announce_self();
-    DPRINTF("successfully loaded vm state\n");
 
     bdrv_clear_incoming_migration_all();
     /* Make sure all file formats flush their mutable metadata */
@@ -300,7 +289,7 @@ static void migrate_fd_cleanup(void *opaque)
     s->cleanup_bh = NULL;
 
     if (s->file) {
-        DPRINTF("closing file\n");
+        trace_migrate_fd_cleanup();
         qemu_mutex_unlock_iothread();
         qemu_thread_join(&s->thread);
         qemu_mutex_lock_iothread();
@@ -323,7 +312,7 @@ static void migrate_fd_cleanup(void *opaque)
 
 void migrate_fd_error(MigrationState *s)
 {
-    DPRINTF("setting error state\n");
+    trace_migrate_fd_error();
     assert(s->file == NULL);
     s->state = MIG_STATE_ERROR;
     trace_migrate_set_state(MIG_STATE_ERROR);
@@ -333,7 +322,7 @@ void migrate_fd_error(MigrationState *s)
 static void migrate_fd_cancel(MigrationState *s)
 {
     int old_state ;
-    DPRINTF("cancelling migration\n");
+    trace_migrate_fd_cancel();
 
     do {
         old_state = s->state;
@@ -583,29 +572,23 @@ static void *migration_thread(void *opaque)
     int64_t start_time = initial_time;
     bool old_vm_running = false;
 
-    DPRINTF("beginning savevm\n");
     qemu_savevm_state_begin(s->file, &s->params);
 
     s->setup_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) - setup_start;
     migrate_set_state(s, MIG_STATE_SETUP, MIG_STATE_ACTIVE);
 
-    DPRINTF("setup complete\n");
-
     while (s->state == MIG_STATE_ACTIVE) {
         int64_t current_time;
         uint64_t pending_size;
 
         if (!qemu_file_rate_limit(s->file)) {
-            DPRINTF("iterate\n");
             pending_size = qemu_savevm_state_pending(s->file, max_size);
-            DPRINTF("pending size %" PRIu64 " max %" PRIu64 "\n",
-                    pending_size, max_size);
+            trace_migrate_pending(pending_size, max_size);
             if (pending_size && pending_size >= max_size) {
                 qemu_savevm_state_iterate(s->file);
             } else {
                 int ret;
 
-                DPRINTF("done iterating\n");
                 qemu_mutex_lock_iothread();
                 start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
                 qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
@@ -644,9 +627,8 @@ static void *migration_thread(void *opaque)
             s->mbps = time_spent ? (((double) transferred_bytes * 8.0) /
                     ((double) time_spent / 1000.0)) / 1000.0 / 1000.0 : -1;
 
-            DPRINTF("transferred %" PRIu64 " time_spent %" PRIu64
-                    " bandwidth %g max_size %" PRId64 "\n",
-                    transferred_bytes, time_spent, bandwidth, max_size);
+            trace_migrate_transferred(transferred_bytes, time_spent,
+                                      bandwidth, max_size);
             /* if we haven't sent anything, we don't want to recalculate
                10000 is a small enough number for our purposes */
             if (s->dirty_bytes_rate && transferred_bytes > 10000) {
diff --git a/qemu-file.c b/qemu-file.c
index f074af1..1bf4b62 100644
--- a/qemu-file.c
+++ b/qemu-file.c
@@ -4,6 +4,7 @@
 #include "block/coroutine.h"
 #include "migration/migration.h"
 #include "migration/qemu-file.h"
+#include "trace.h"
 
 #define IO_BUF_SIZE 32768
 #define MAX_IOV_SIZE MIN(IOV_MAX, 64)
@@ -595,6 +596,7 @@ int qemu_fclose(QEMUFile *f)
         ret = f->last_error;
     }
     g_free(f);
+    trace_qemu_file_fclose();
     return ret;
 }
 
diff --git a/savevm.c b/savevm.c
index d094fbb..efe604a 100644
--- a/savevm.c
+++ b/savevm.c
@@ -81,6 +81,7 @@ static void qemu_announce_self_iter(NICState *nic, void *opaque)
     uint8_t buf[60];
     int len;
 
+    trace_qemu_announce_self_iter();
     len = announce_self_create(buf, nic->conf->macaddr.a);
 
     qemu_send_packet_raw(qemu_get_queue(nic), buf, len);
@@ -429,6 +430,7 @@ void vmstate_unregister(DeviceState *dev, const VMStateDescription *vmsd,
 
 static int vmstate_load(QEMUFile *f, SaveStateEntry *se, int version_id)
 {
+    trace_vmstate_load(se->idstr, se->vmsd ? se->vmsd->name : "(old)");
     if (!se->vmsd) {         /* Old style */
         return se->ops->load_state(f, se->opaque, version_id);
     }
@@ -437,6 +439,7 @@ static int vmstate_load(QEMUFile *f, SaveStateEntry *se, int version_id)
 
 static void vmstate_save(QEMUFile *f, SaveStateEntry *se)
 {
+    trace_vmstate_save(se->idstr, se->vmsd ? se->vmsd->name : "(old)");
     if (!se->vmsd) {         /* Old style */
         se->ops->save_state(f, se->opaque);
         return;
@@ -463,6 +466,7 @@ void qemu_savevm_state_begin(QEMUFile *f,
     SaveStateEntry *se;
     int ret;
 
+    trace_savevm_state_begin();
     QTAILQ_FOREACH(se, &savevm_handlers, entry) {
         if (!se->ops || !se->ops->set_params) {
             continue;
@@ -515,6 +519,7 @@ int qemu_savevm_state_iterate(QEMUFile *f)
     SaveStateEntry *se;
     int ret = 1;
 
+    trace_savevm_state_iterate();
     QTAILQ_FOREACH(se, &savevm_handlers, entry) {
         if (!se->ops || !se->ops->save_live_iterate) {
             continue;
@@ -554,6 +559,8 @@ void qemu_savevm_state_complete(QEMUFile *f)
     SaveStateEntry *se;
     int ret;
 
+    trace_savevm_state_complete();
+
     cpu_synchronize_all_states();
 
     QTAILQ_FOREACH(se, &savevm_handlers, entry) {
@@ -628,6 +635,7 @@ void qemu_savevm_state_cancel(void)
 {
     SaveStateEntry *se;
 
+    trace_savevm_state_cancel();
     QTAILQ_FOREACH(se, &savevm_handlers, entry) {
         if (se->ops && se->ops->cancel) {
             se->ops->cancel(se->opaque);
diff --git a/trace-events b/trace-events
index 6225235..f7c0465 100644
--- a/trace-events
+++ b/trace-events
@@ -1033,6 +1033,17 @@ vmware_setmode(uint32_t w, uint32_t h, uint32_t bpp) "%dx%d @ %d bpp"
 # savevm.c
 savevm_section_start(const char *id, unsigned int section_id) "%s, section_id %u"
 savevm_section_end(const char *id, unsigned int section_id) "%s, section_id %u"
+savevm_state_begin(void) ""
+savevm_state_iterate(void) ""
+savevm_state_complete(void) ""
+savevm_state_cancel(void) ""
+vmstate_save(const char *idstr, const char *vmsd_name) "%s, %s"
+vmstate_load(const char *idstr, const char *vmsd_name) "%s, %s"
+vmstate_load_field_error(const char *field, int ret) "field \"%s\" load failed, ret = %d"
+qemu_announce_self_iter(void) ""
+
+# qemu-file.c
+qemu_file_fclose(void) ""
 
 # arch_init.c
 migration_bitmap_sync_start(void) ""
@@ -1165,6 +1176,11 @@ virtio_ccw_new_device(int cssid, int ssid, int schid, int devno, const char *dev
 
 # migration.c
 migrate_set_state(int new_state) "new state %d"
+migrate_fd_cleanup(void) ""
+migrate_fd_error(void) ""
+migrate_fd_cancel(void) ""
+migrate_pending(uint64_t size, uint64_t max) "pending size %" PRIu64 " max %" PRIu64
+migrate_transferred(uint64_t tranferred, uint64_t time_spent, double bandwidth, uint64_t size) "transferred %" PRIu64 " time_spent %" PRIu64 " bandwidth %g max_size %" PRId64
 
 # kvm-all.c
 kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
diff --git a/vmstate.c b/vmstate.c
index d1f5eb0..b689f2f 100644
--- a/vmstate.c
+++ b/vmstate.c
@@ -3,6 +3,7 @@
 #include "migration/qemu-file.h"
 #include "migration/vmstate.h"
 #include "qemu/bitops.h"
+#include "trace.h"
 
 static void vmstate_subsection_save(QEMUFile *f, const VMStateDescription *vmsd,
                                     void *opaque);
@@ -73,6 +74,7 @@ int vmstate_load_state(QEMUFile *f, const VMStateDescription *vmsd,
 
                 }
                 if (ret < 0) {
+                    trace_vmstate_load_field_error(field->name, ret);
                     return ret;
                 }
             }
-- 
1.8.4.rc4

Re: [Qemu-devel] [PATCH v2 3/3] migration: add more traces

[Paolo Bonzini]

Il 04/03/2014 05:10, Alexey Kardashevskiy ha scritto:
> @@ -81,6 +81,7 @@ static void qemu_announce_self_iter(NICState *nic, void *opaque)
>      uint8_t buf[60];
>      int len;
>
> +    trace_qemu_announce_self_iter();

Should include the nic or, even better, the six bytes of the MAC address.

Otherwise fine.

Paolo

[Qemu-devel] [PATCH v3] migration: add more traces

[Alexey Kardashevskiy]

This replaces DPRINTF macro with tracepoints.

This moves some messages from migration.c to savevm.c.

This adds tracepoint to signal about fileds failed to migrate.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---

This is v3. Should I repost the whole thing or just "3/3 v3" is ok? Thanks!


---
Changes:
v3:
* added MAC address to trace_qemu_announce_self_iter


---
 migration.c  | 30 ++++++------------------------
 qemu-file.c  |  2 ++
 savevm.c     | 10 ++++++++++
 trace-events | 16 ++++++++++++++++
 vmstate.c    |  2 ++
 5 files changed, 36 insertions(+), 24 deletions(-)

diff --git a/migration.c b/migration.c
index 14235b2..2497c5d 100644
--- a/migration.c
+++ b/migration.c
@@ -26,16 +26,6 @@
 #include "qmp-commands.h"
 #include "trace.h"
 
-//#define DEBUG_MIGRATION
-
-#ifdef DEBUG_MIGRATION
-#define DPRINTF(fmt, ...) \
-    do { printf("migration: " fmt, ## __VA_ARGS__); } while (0)
-#else
-#define DPRINTF(fmt, ...) \
-    do { } while (0)
-#endif
-
 enum {
     MIG_STATE_ERROR = -1,
     MIG_STATE_NONE,
@@ -111,7 +101,6 @@ static void process_incoming_migration_co(void *opaque)
         exit(EXIT_FAILURE);
     }
     qemu_announce_self();
-    DPRINTF("successfully loaded vm state\n");
 
     bdrv_clear_incoming_migration_all();
     /* Make sure all file formats flush their mutable metadata */
@@ -300,7 +289,7 @@ static void migrate_fd_cleanup(void *opaque)
     s->cleanup_bh = NULL;
 
     if (s->file) {
-        DPRINTF("closing file\n");
+        trace_migrate_fd_cleanup();
         qemu_mutex_unlock_iothread();
         qemu_thread_join(&s->thread);
         qemu_mutex_lock_iothread();
@@ -323,7 +312,7 @@ static void migrate_fd_cleanup(void *opaque)
 
 void migrate_fd_error(MigrationState *s)
 {
-    DPRINTF("setting error state\n");
+    trace_migrate_fd_error();
     assert(s->file == NULL);
     s->state = MIG_STATE_ERROR;
     trace_migrate_set_state(MIG_STATE_ERROR);
@@ -333,7 +322,7 @@ void migrate_fd_error(MigrationState *s)
 static void migrate_fd_cancel(MigrationState *s)
 {
     int old_state ;
-    DPRINTF("cancelling migration\n");
+    trace_migrate_fd_cancel();
 
     do {
         old_state = s->state;
@@ -583,29 +572,23 @@ static void *migration_thread(void *opaque)
     int64_t start_time = initial_time;
     bool old_vm_running = false;
 
-    DPRINTF("beginning savevm\n");
     qemu_savevm_state_begin(s->file, &s->params);
 
     s->setup_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) - setup_start;
     migrate_set_state(s, MIG_STATE_SETUP, MIG_STATE_ACTIVE);
 
-    DPRINTF("setup complete\n");
-
     while (s->state == MIG_STATE_ACTIVE) {
         int64_t current_time;
         uint64_t pending_size;
 
         if (!qemu_file_rate_limit(s->file)) {
-            DPRINTF("iterate\n");
             pending_size = qemu_savevm_state_pending(s->file, max_size);
-            DPRINTF("pending size %" PRIu64 " max %" PRIu64 "\n",
-                    pending_size, max_size);
+            trace_migrate_pending(pending_size, max_size);
             if (pending_size && pending_size >= max_size) {
                 qemu_savevm_state_iterate(s->file);
             } else {
                 int ret;
 
-                DPRINTF("done iterating\n");
                 qemu_mutex_lock_iothread();
                 start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
                 qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
@@ -644,9 +627,8 @@ static void *migration_thread(void *opaque)
             s->mbps = time_spent ? (((double) transferred_bytes * 8.0) /
                     ((double) time_spent / 1000.0)) / 1000.0 / 1000.0 : -1;
 
-            DPRINTF("transferred %" PRIu64 " time_spent %" PRIu64
-                    " bandwidth %g max_size %" PRId64 "\n",
-                    transferred_bytes, time_spent, bandwidth, max_size);
+            trace_migrate_transferred(transferred_bytes, time_spent,
+                                      bandwidth, max_size);
             /* if we haven't sent anything, we don't want to recalculate
                10000 is a small enough number for our purposes */
             if (s->dirty_bytes_rate && transferred_bytes > 10000) {
diff --git a/qemu-file.c b/qemu-file.c
index f074af1..1bf4b62 100644
--- a/qemu-file.c
+++ b/qemu-file.c
@@ -4,6 +4,7 @@
 #include "block/coroutine.h"
 #include "migration/migration.h"
 #include "migration/qemu-file.h"
+#include "trace.h"
 
 #define IO_BUF_SIZE 32768
 #define MAX_IOV_SIZE MIN(IOV_MAX, 64)
@@ -595,6 +596,7 @@ int qemu_fclose(QEMUFile *f)
         ret = f->last_error;
     }
     g_free(f);
+    trace_qemu_file_fclose();
     return ret;
 }
 
diff --git a/savevm.c b/savevm.c
index d094fbb..ef7d9ce 100644
--- a/savevm.c
+++ b/savevm.c
@@ -41,6 +41,7 @@
 #include "qemu/iov.h"
 #include "block/snapshot.h"
 #include "block/qapi.h"
+#include <netinet/ether.h>
 
 #define SELF_ANNOUNCE_ROUNDS 5
 
@@ -81,6 +82,8 @@ static void qemu_announce_self_iter(NICState *nic, void *opaque)
     uint8_t buf[60];
     int len;
 
+    trace_qemu_announce_self_iter(ether_ntoa((struct ether_addr *)
+                                             &nic->conf->macaddr));
     len = announce_self_create(buf, nic->conf->macaddr.a);
 
     qemu_send_packet_raw(qemu_get_queue(nic), buf, len);
@@ -429,6 +432,7 @@ void vmstate_unregister(DeviceState *dev, const VMStateDescription *vmsd,
 
 static int vmstate_load(QEMUFile *f, SaveStateEntry *se, int version_id)
 {
+    trace_vmstate_load(se->idstr, se->vmsd ? se->vmsd->name : "(old)");
     if (!se->vmsd) {         /* Old style */
         return se->ops->load_state(f, se->opaque, version_id);
     }
@@ -437,6 +441,7 @@ static int vmstate_load(QEMUFile *f, SaveStateEntry *se, int version_id)
 
 static void vmstate_save(QEMUFile *f, SaveStateEntry *se)
 {
+    trace_vmstate_save(se->idstr, se->vmsd ? se->vmsd->name : "(old)");
     if (!se->vmsd) {         /* Old style */
         se->ops->save_state(f, se->opaque);
         return;
@@ -463,6 +468,7 @@ void qemu_savevm_state_begin(QEMUFile *f,
     SaveStateEntry *se;
     int ret;
 
+    trace_savevm_state_begin();
     QTAILQ_FOREACH(se, &savevm_handlers, entry) {
         if (!se->ops || !se->ops->set_params) {
             continue;
@@ -515,6 +521,7 @@ int qemu_savevm_state_iterate(QEMUFile *f)
     SaveStateEntry *se;
     int ret = 1;
 
+    trace_savevm_state_iterate();
     QTAILQ_FOREACH(se, &savevm_handlers, entry) {
         if (!se->ops || !se->ops->save_live_iterate) {
             continue;
@@ -554,6 +561,8 @@ void qemu_savevm_state_complete(QEMUFile *f)
     SaveStateEntry *se;
     int ret;
 
+    trace_savevm_state_complete();
+
     cpu_synchronize_all_states();
 
     QTAILQ_FOREACH(se, &savevm_handlers, entry) {
@@ -628,6 +637,7 @@ void qemu_savevm_state_cancel(void)
 {
     SaveStateEntry *se;
 
+    trace_savevm_state_cancel();
     QTAILQ_FOREACH(se, &savevm_handlers, entry) {
         if (se->ops && se->ops->cancel) {
             se->ops->cancel(se->opaque);
diff --git a/trace-events b/trace-events
index 828a3e9..395da76 100644
--- a/trace-events
+++ b/trace-events
@@ -1033,6 +1033,17 @@ vmware_setmode(uint32_t w, uint32_t h, uint32_t bpp) "%dx%d @ %d bpp"
 # savevm.c
 savevm_section_start(const char *id, unsigned int section_id) "%s, section_id %u"
 savevm_section_end(const char *id, unsigned int section_id) "%s, section_id %u"
+savevm_state_begin(void) ""
+savevm_state_iterate(void) ""
+savevm_state_complete(void) ""
+savevm_state_cancel(void) ""
+vmstate_save(const char *idstr, const char *vmsd_name) "%s, %s"
+vmstate_load(const char *idstr, const char *vmsd_name) "%s, %s"
+vmstate_load_field_error(const char *field, int ret) "field \"%s\" load failed, ret = %d"
+qemu_announce_self_iter(const char *mac) "%s"
+
+# qemu-file.c
+qemu_file_fclose(void) ""
 
 # arch_init.c
 migration_bitmap_sync_start(void) ""
@@ -1165,6 +1176,11 @@ virtio_ccw_new_device(int cssid, int ssid, int schid, int devno, const char *dev
 
 # migration.c
 migrate_set_state(int new_state) "new state %d"
+migrate_fd_cleanup(void) ""
+migrate_fd_error(void) ""
+migrate_fd_cancel(void) ""
+migrate_pending(uint64_t size, uint64_t max) "pending size %" PRIu64 " max %" PRIu64
+migrate_transferred(uint64_t tranferred, uint64_t time_spent, double bandwidth, uint64_t size) "transferred %" PRIu64 " time_spent %" PRIu64 " bandwidth %g max_size %" PRId64
 
 # kvm-all.c
 kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
diff --git a/vmstate.c b/vmstate.c
index d1f5eb0..b689f2f 100644
--- a/vmstate.c
+++ b/vmstate.c
@@ -3,6 +3,7 @@
 #include "migration/qemu-file.h"
 #include "migration/vmstate.h"
 #include "qemu/bitops.h"
+#include "trace.h"
 
 static void vmstate_subsection_save(QEMUFile *f, const VMStateDescription *vmsd,
                                     void *opaque);
@@ -73,6 +74,7 @@ int vmstate_load_state(QEMUFile *f, const VMStateDescription *vmsd,
 
                 }
                 if (ret < 0) {
+                    trace_vmstate_load_field_error(field->name, ret);
                     return ret;
                 }
             }
-- 
1.8.4.rc4

Re: [Qemu-devel] [PATCH v3] migration: add more traces

[Amit Shah]

On (Wed) 05 Mar 2014 [02:14:56], Alexey Kardashevskiy wrote:
> This replaces DPRINTF macro with tracepoints.
> 
> This moves some messages from migration.c to savevm.c.
> 
> This adds tracepoint to signal about fileds failed to migrate.
> 
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
> 
> This is v3. Should I repost the whole thing or just "3/3 v3" is ok? Thanks!

Sending the series again is preferred.  (You can see 3/3 was missed in
the subject line.  There are other small quirks that can happen and
cause more pain for maintainers.)

I've corrected the 's/fileds/fields' typo in the commit msg and picked
up this series and applied to my migration branch, which I'll send to
Juan.


		Amit

Re: [Qemu-devel] [PATCH v3] migration: add more traces

[Amit Shah]

On (Wed) 05 Mar 2014 [02:14:56], Alexey Kardashevskiy wrote:
> This replaces DPRINTF macro with tracepoints.
> 
> This moves some messages from migration.c to savevm.c.
> 
> This adds tracepoint to signal about fileds failed to migrate.
> 
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
> 
> This is v3. Should I repost the whole thing or just "3/3 v3" is ok? Thanks!

This broke the build on windows:

http://news.gmane.org/find-root.php?message_id=CAFEAcA%5fEa72JTVLJ3Z%2dzUtoe8vg%2bjh8R96mNW2c2x2Mx%5fj%2bFwg%40mail.gmail.com

Please fix.

		Amit

Re: [Qemu-devel] [PATCH v3] migration: add more traces

[Alexey Kardashevskiy]

On 03/11/2014 04:17 AM, Amit Shah wrote:
> On (Wed) 05 Mar 2014 [02:14:56], Alexey Kardashevskiy wrote:
>> This replaces DPRINTF macro with tracepoints.
>>
>> This moves some messages from migration.c to savevm.c.
>>
>> This adds tracepoint to signal about fileds failed to migrate.
>>
>> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
>> ---
>>
>> This is v3. Should I repost the whole thing or just "3/3 v3" is ok? Thanks!
> 
> This broke the build on windows:
> 
> http://news.gmane.org/find-root.php?message_id=CAFEAcA%5fEa72JTVLJ3Z%2dzUtoe8vg%2bjh8R96mNW2c2x2Mx%5fj%2bFwg%40mail.gmail.com
> 
> Please fix.

I am sorry but how? Is it msvc? Is it mingw? Or replace with
%02x:%02x:%02x:%02x:%02x:%02x?


-- 
Alexey

Re: [Qemu-devel] [PATCH v3] migration: add more traces

[Juan Quintela]

Alexey Kardashevskiy <aik@ozlabs.ru> wrote:
> On 03/11/2014 04:17 AM, Amit Shah wrote:
>> On (Wed) 05 Mar 2014 [02:14:56], Alexey Kardashevskiy wrote:
>>> This replaces DPRINTF macro with tracepoints.
>>>
>>> This moves some messages from migration.c to savevm.c.
>>>
>>> This adds tracepoint to signal about fileds failed to migrate.
>>>
>>> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
>>> ---
>>>
>>> This is v3. Should I repost the whole thing or just "3/3 v3" is ok? Thanks!
>> 
>> This broke the build on windows:
>> 
>> http://news.gmane.org/find-root.php?message_id=CAFEAcA%5fEa72JTVLJ3Z%2dzUtoe8vg%2bjh8R96mNW2c2x2Mx%5fj%2bFwg%40mail.gmail.com
>> 
>> Please fix.
>
> I am sorry but how? Is it msvc? Is it mingw? Or replace with
> %02x:%02x:%02x:%02x:%02x:%02x?

mingw32.

Replace with %02x:02x or create a

qmeu_ether_ntoa()  function with exactly that code in

utils/cutils.c


Later, Juan.

Re: [Qemu-devel] [PATCH v2 0/3] migration: add more traces

[Paolo Bonzini]

Il 04/03/2014 05:10, Alexey Kardashevskiy ha scritto:
> This reworks/adds traces for migration.
> v2 is rework of an original single patch with the same subject.
>
> Alexey Kardashevskiy (3):
>   vl: add system_wakeup_request tracepoint
>   migration: extend section_start/end traces
>   migration: add more traces
>
>  migration.c  | 30 ++++++------------------------
>  qemu-file.c  |  2 ++
>  savevm.c     | 20 ++++++++++++++------
>  trace-events | 21 +++++++++++++++++++--
>  vl.c         |  2 ++
>  vmstate.c    |  2 ++
>  6 files changed, 45 insertions(+), 32 deletions(-)
>

Looks good, CCing Juan and Stefan.  It would be nice to have this in 
2.0.  I had a remark on patch 3.

Paolo

Re: [Qemu-devel] [PATCH v2 0/3] migration: add more traces

[Stefan Hajnoczi]

On Tue, Mar 04, 2014 at 01:32:54PM +0100, Paolo Bonzini wrote:
> Il 04/03/2014 05:10, Alexey Kardashevskiy ha scritto:
> >This reworks/adds traces for migration.
> >v2 is rework of an original single patch with the same subject.
> >
> >Alexey Kardashevskiy (3):
> >  vl: add system_wakeup_request tracepoint
> >  migration: extend section_start/end traces
> >  migration: add more traces
> >
> > migration.c  | 30 ++++++------------------------
> > qemu-file.c  |  2 ++
> > savevm.c     | 20 ++++++++++++++------
> > trace-events | 21 +++++++++++++++++++--
> > vl.c         |  2 ++
> > vmstate.c    |  2 ++
> > 6 files changed, 45 insertions(+), 32 deletions(-)
> >
> 
> Looks good, CCing Juan and Stefan.  It would be nice to have this in
> 2.0.  I had a remark on patch 3.

Juan: please take this series through the migration tree

Stefan