[Qemu-devel] [PULL for-2.0 0/2] target-arm queue

[Qemu-devel] [PULL for-2.0 0/2] target-arm queue

[Peter Maydell]

A small pull request with two safe bugfixes for 2.0...

thanks
-- PMM

The following changes since commit 3a87f8b6859e6221b827ab4737779dddb37553ec:

  Merge remote-tracking branch 'remotes/afaerber/tags/ppc-for-2.0' into staging (2014-03-20 11:45:38 +0000)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20140324

for you to fetch changes up to da0af40dd70c8f8f821d79c367aecb08618af28e:

  target-arm: Load ELF images with the correct machine type for CPU (2014-03-24 16:41:10 +0000)

----------------------------------------------------------------
target-arm queue for 2.0:
 * Fix wrong-results bug in A64 Neon MLS instruction
 * Fix loading of ELF images for 32 bit boards in qemu-system-aarch64

----------------------------------------------------------------
Peter Maydell (2):
      target-arm: Fix A64 Neon MLS
      target-arm: Load ELF images with the correct machine type for CPU

 hw/arm/boot.c              | 5 ++++-
 target-arm/translate-a64.c | 2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)

[Qemu-devel] [PULL 1/2] target-arm: Fix A64 Neon MLS

[Peter Maydell]

The order of operands for the accumulate step in disas_simd_3same_int()
was reversed. This only affected the MLS instruction, since all the
other accumulating instructions in this category perform an addition
rather than a subtraction.

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/translate-a64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target-arm/translate-a64.c b/target-arm/translate-a64.c
index 9f06450..9175e48 100644
--- a/target-arm/translate-a64.c
+++ b/target-arm/translate-a64.c
@@ -8925,7 +8925,7 @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn)
 
                 genfn = fns[size][is_sub];
                 read_vec_element_i32(s, tcg_op1, rd, pass, MO_32);
-                genfn(tcg_res, tcg_res, tcg_op1);
+                genfn(tcg_res, tcg_op1, tcg_res);
             }
 
             write_vec_element_i32(s, tcg_res, rd, pass, MO_32);
-- 
1.9.0

[Qemu-devel] [PULL 2/2] target-arm: Load ELF images with the correct machine type for CPU

[Peter Maydell]

When trying to load an ELF file specified via -kernel, we need to
pass load_elf() the ELF machine type corresponding to the CPU we're
booting with, not the one corresponding to the softmmu binary
we happen to be running. (The two are different in the case of
loading a 32-bit ARM ELF file into a 32 bit CPU being emulated
by qemu-system aarch64.) This was causing us to incorrectly fail
to load ELF images in this situation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1395427476-25546-1-git-send-email-peter.maydell@linaro.org
---
 hw/arm/boot.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index dc62918..3d1f4a2 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -448,6 +448,7 @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info)
     int initrd_size;
     int is_linux = 0;
     uint64_t elf_entry;
+    int elf_machine;
     hwaddr entry, kernel_load_offset;
     int big_endian;
     static const ARMInsnFixup *primary_loader;
@@ -463,9 +464,11 @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info)
     if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
         primary_loader = bootloader_aarch64;
         kernel_load_offset = KERNEL64_LOAD_ADDR;
+        elf_machine = EM_AARCH64;
     } else {
         primary_loader = bootloader;
         kernel_load_offset = KERNEL_LOAD_ADDR;
+        elf_machine = EM_ARM;
     }
 
     info->dtb_filename = qemu_opt_get(qemu_get_machine_opts(), "dtb");
@@ -501,7 +504,7 @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info)
 
     /* Assume that raw images are linux kernels, and ELF images are not.  */
     kernel_size = load_elf(info->kernel_filename, NULL, NULL, &elf_entry,
-                           NULL, NULL, big_endian, ELF_MACHINE, 1);
+                           NULL, NULL, big_endian, elf_machine, 1);
     entry = elf_entry;
     if (kernel_size < 0) {
         kernel_size = load_uimage(info->kernel_filename, &entry, NULL,
-- 
1.9.0

Re: [Qemu-devel] [PULL for-2.0 0/2] target-arm queue

[Peter Maydell]

On 24 March 2014 17:18, Peter Maydell <peter.maydell@linaro.org> wrote:
> A small pull request with two safe bugfixes for 2.0...
>
> thanks
> -- PMM
>
> The following changes since commit 3a87f8b6859e6221b827ab4737779dddb37553ec:
>
>   Merge remote-tracking branch 'remotes/afaerber/tags/ppc-for-2.0' into staging (2014-03-20 11:45:38 +0000)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20140324
>
> for you to fetch changes up to da0af40dd70c8f8f821d79c367aecb08618af28e:
>
>   target-arm: Load ELF images with the correct machine type for CPU (2014-03-24 16:41:10 +0000)
>
> ----------------------------------------------------------------
> target-arm queue for 2.0:
>  * Fix wrong-results bug in A64 Neon MLS instruction
>  * Fix loading of ELF images for 32 bit boards in qemu-system-aarch64

Applied, thanks.

-- PMM

[Qemu-devel] [PULL for-2.0 0/2] target-arm queue

[Peter Maydell]

This pull request just has the patches which make integratorcp
no longer the default board for qemu-system-arm and qemu-system-aarch64.

thanks
-- PMM

The following changes since commit bea4acda3bff00e98cb00d5354f23de9e74a928f:

  Merge remote-tracking branch 'remotes/mcayland/qemu-sparc' into staging (2014-03-27 10:54:17 +0000)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20140327

for you to fetch changes up to a7a5544a3a59600f30f29985397f56ee40929850:

  vl.c: Improve message when no default machine is found (2014-03-27 14:01:13 +0000)

----------------------------------------------------------------
target-arm queue:
 * Don't default to integratorcp board if no machine specified

----------------------------------------------------------------
Peter Maydell (2):
      hw/arm: Stop specifying integratorcp as the default board
      vl.c: Improve message when no default machine is found

 hw/arm/integratorcp.c | 1 -
 vl.c                  | 3 ++-
 2 files changed, 2 insertions(+), 2 deletions(-)

Re: [Qemu-devel] [PULL for-2.0 0/2] target-arm queue

[Peter Maydell]

On 27 March 2014 14:13, Peter Maydell <peter.maydell@linaro.org> wrote:
> This pull request just has the patches which make integratorcp
> no longer the default board for qemu-system-arm and qemu-system-aarch64.
>
> thanks
> -- PMM
>
> The following changes since commit bea4acda3bff00e98cb00d5354f23de9e74a928f:
>
>   Merge remote-tracking branch 'remotes/mcayland/qemu-sparc' into staging (2014-03-27 10:54:17 +0000)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20140327
>
> for you to fetch changes up to a7a5544a3a59600f30f29985397f56ee40929850:
>
>   vl.c: Improve message when no default machine is found (2014-03-27 14:01:13 +0000)

Applied, thanks.

-- PMM