From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, afaerber@suse.de
Subject: [Qemu-devel] [PATCH for-2.0 3/7] pm_smbus: correctly report unclaimed cycles
Date: Mon, 31 Mar 2014 18:26:31 +0200 [thread overview]
Message-ID: <1396283195-6819-4-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1396283195-6819-1-git-send-email-pbonzini@redhat.com>
Without this patch, i2cdetect will report all addresses as present.
With it, only 0x50..0x57 are present.
Before:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
10: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
20: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
30: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
40: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
50: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
60: 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
70: 70 71 72 73 74 75 76 77
After:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: 50 51 52 53 54 55 56 57 -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/i2c/pm_smbus.c | 63 ++++++++++++++++++++++++++++++++++++-------------------
1 file changed, 41 insertions(+), 22 deletions(-)
diff --git a/hw/i2c/pm_smbus.c b/hw/i2c/pm_smbus.c
index 9f50067..7730100 100644
--- a/hw/i2c/pm_smbus.c
+++ b/hw/i2c/pm_smbus.c
@@ -60,59 +60,78 @@ static void smb_transaction(PMSMBus *s)
uint8_t cmd = s->smb_cmd;
uint8_t addr = s->smb_addr >> 1;
I2CBus *bus = s->smbus;
+ int ret;
SMBUS_DPRINTF("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot);
/* Transaction isn't exec if STS_DEV_ERR bit set */
if ((s->smb_stat & STS_DEV_ERR) != 0) {
- goto error;
- }
+ goto error;
+ }
switch(prot) {
case 0x0:
- smbus_quick_command(bus, addr, read);
- s->smb_stat |= STS_BYTE_DONE | STS_INTR;
- break;
+ ret = smbus_quick_command(bus, addr, read);
+ goto done;
case 0x1:
if (read) {
- s->smb_data0 = smbus_receive_byte(bus, addr);
+ ret = smbus_receive_byte(bus, addr);
+ goto data8;
} else {
- smbus_send_byte(bus, addr, cmd);
+ ret = smbus_send_byte(bus, addr, cmd);
+ goto done;
}
- s->smb_stat |= STS_BYTE_DONE | STS_INTR;
- break;
case 0x2:
if (read) {
- s->smb_data0 = smbus_read_byte(bus, addr, cmd);
+ ret = smbus_read_byte(bus, addr, cmd);
+ goto data8;
} else {
- smbus_write_byte(bus, addr, cmd, s->smb_data0);
+ ret = smbus_write_byte(bus, addr, cmd, s->smb_data0);
+ goto done;
}
- s->smb_stat |= STS_BYTE_DONE | STS_INTR;
break;
case 0x3:
if (read) {
- uint16_t val;
- val = smbus_read_word(bus, addr, cmd);
- s->smb_data0 = val;
- s->smb_data1 = val >> 8;
+ ret = smbus_read_word(bus, addr, cmd);
+ goto data16;
} else {
- smbus_write_word(bus, addr, cmd, (s->smb_data1 << 8) | s->smb_data0);
+ ret = smbus_write_word(bus, addr, cmd, (s->smb_data1 << 8) | s->smb_data0);
+ goto done;
}
- s->smb_stat |= STS_BYTE_DONE | STS_INTR;
break;
case 0x5:
if (read) {
- s->smb_data0 = smbus_read_block(bus, addr, cmd, s->smb_data);
+ ret = smbus_read_block(bus, addr, cmd, s->smb_data);
+ goto data8;
} else {
- smbus_write_block(bus, addr, cmd, s->smb_data, s->smb_data0);
+ ret = smbus_write_block(bus, addr, cmd, s->smb_data, s->smb_data0);
+ goto done;
}
- s->smb_stat |= STS_BYTE_DONE | STS_INTR;
break;
default:
goto error;
}
+ abort();
+
+data16:
+ if (ret < 0) {
+ goto error;
+ }
+ s->smb_data1 = ret >> 8;
+data8:
+ if (ret < 0) {
+ goto error;
+ }
+ s->smb_data0 = ret;
+done:
+ if (ret < 0) {
+ goto error;
+ }
+ s->smb_stat |= STS_BYTE_DONE | STS_INTR;
return;
- error:
+error:
s->smb_stat |= STS_DEV_ERR;
+ return;
+
}
static void smb_ioport_writeb(void *opaque, hwaddr addr, uint64_t val,
--
1.9.0
next prev parent reply other threads:[~2014-03-31 16:27 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-31 16:26 [Qemu-devel] [PATCH for-2.0 0/7] SMBus and tmp105 fixes Paolo Bonzini
2014-03-31 16:26 ` [Qemu-devel] [PATCH for-2.0 1/7] smbus: allow returning an error from reads Paolo Bonzini
2014-03-31 21:20 ` Andreas Färber
2014-03-31 16:26 ` [Qemu-devel] [PATCH for-2.0 2/7] smbus: return -1 if nothing found at the given address Paolo Bonzini
2014-03-31 21:29 ` Andreas Färber
2014-03-31 16:26 ` Paolo Bonzini [this message]
2014-03-31 21:38 ` [Qemu-devel] [PATCH for-2.0 3/7] pm_smbus: correctly report unclaimed cycles Andreas Färber
2014-03-31 16:26 ` [Qemu-devel] [PATCH for-2.0 4/7] tmp105: read temperature in milli-celsius Paolo Bonzini
2014-03-31 16:26 ` [Qemu-devel] [PATCH for-2.0 5/7] tmp105-test: wrap simple building blocks for testing Paolo Bonzini
2014-03-31 16:26 ` [Qemu-devel] [PATCH for-2.0 6/7] tmp105-test: add a second sensor and test that one Paolo Bonzini
2014-03-31 21:01 ` Andreas Färber
2014-03-31 16:26 ` [Qemu-devel] [PATCH for-2.0 7/7] tmp105-test: test QOM property and precision Paolo Bonzini
2014-03-31 21:58 ` [Qemu-devel] [PATCH for-2.0 0/7] SMBus and tmp105 fixes Andreas Färber
2014-04-02 15:55 ` Michael S. Tsirkin
2014-04-02 15:58 ` Paolo Bonzini
2014-05-07 8:03 ` Paolo Bonzini
2014-05-07 9:02 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396283195-6819-4-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=afaerber@suse.de \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).