From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Peter Maydell <peter.maydell@linaro.org>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL for-2.0 12/51] bochs: Unify header structs and make them QEMU_PACKED
Date: Tue, 1 Apr 2014 19:18:50 +0200 [thread overview]
Message-ID: <1396372769-11688-13-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1396372769-11688-1-git-send-email-stefanha@redhat.com>
From: Kevin Wolf <kwolf@redhat.com>
This is an on-disk structure, so offsets must be accurate.
Before this patch, sizeof(bochs) != sizeof(header_v1), which makes the
memcpy() between both invalid. We're lucky enough that the destination
buffer happened to be the larger one, and the memcpy size to be taken
from the smaller one, so we didn't get a buffer overflow in practice.
This patch unifies the both structures, eliminating the need to do a
memcpy in the first place. The common fields are extracted to the top
level of the struct and the actually differing part gets a union of the
two versions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
block/bochs.c | 67 ++++++++++++++++++++++-------------------------------------
1 file changed, 25 insertions(+), 42 deletions(-)
diff --git a/block/bochs.c b/block/bochs.c
index 4d6403f..ef8e381 100644
--- a/block/bochs.c
+++ b/block/bochs.c
@@ -39,45 +39,30 @@
// not allocated: 0xffffffff
// always little-endian
-struct bochs_header_v1 {
- char magic[32]; // "Bochs Virtual HD Image"
- char type[16]; // "Redolog"
- char subtype[16]; // "Undoable" / "Volatile" / "Growing"
- uint32_t version;
- uint32_t header; // size of header
-
- union {
- struct {
- uint32_t catalog; // num of entries
- uint32_t bitmap; // bitmap size
- uint32_t extent; // extent size
- uint64_t disk; // disk size
- char padding[HEADER_SIZE - 64 - 8 - 20];
- } redolog;
- char padding[HEADER_SIZE - 64 - 8];
- } extra;
-};
-
-// always little-endian
struct bochs_header {
- char magic[32]; // "Bochs Virtual HD Image"
- char type[16]; // "Redolog"
- char subtype[16]; // "Undoable" / "Volatile" / "Growing"
+ char magic[32]; /* "Bochs Virtual HD Image" */
+ char type[16]; /* "Redolog" */
+ char subtype[16]; /* "Undoable" / "Volatile" / "Growing" */
uint32_t version;
- uint32_t header; // size of header
+ uint32_t header; /* size of header */
+
+ uint32_t catalog; /* num of entries */
+ uint32_t bitmap; /* bitmap size */
+ uint32_t extent; /* extent size */
union {
- struct {
- uint32_t catalog; // num of entries
- uint32_t bitmap; // bitmap size
- uint32_t extent; // extent size
- uint32_t reserved; // for ???
- uint64_t disk; // disk size
- char padding[HEADER_SIZE - 64 - 8 - 24];
- } redolog;
- char padding[HEADER_SIZE - 64 - 8];
+ struct {
+ uint32_t reserved; /* for ??? */
+ uint64_t disk; /* disk size */
+ char padding[HEADER_SIZE - 64 - 20 - 12];
+ } QEMU_PACKED redolog;
+ struct {
+ uint64_t disk; /* disk size */
+ char padding[HEADER_SIZE - 64 - 20 - 8];
+ } QEMU_PACKED redolog_v1;
+ char padding[HEADER_SIZE - 64 - 20];
} extra;
-};
+} QEMU_PACKED;
typedef struct BDRVBochsState {
CoMutex lock;
@@ -114,7 +99,6 @@ static int bochs_open(BlockDriverState *bs, QDict *options, int flags,
BDRVBochsState *s = bs->opaque;
int i;
struct bochs_header bochs;
- struct bochs_header_v1 header_v1;
int ret;
bs->read_only = 1; // no write support yet
@@ -134,13 +118,12 @@ static int bochs_open(BlockDriverState *bs, QDict *options, int flags,
}
if (le32_to_cpu(bochs.version) == HEADER_V1) {
- memcpy(&header_v1, &bochs, sizeof(bochs));
- bs->total_sectors = le64_to_cpu(header_v1.extra.redolog.disk) / 512;
+ bs->total_sectors = le64_to_cpu(bochs.extra.redolog_v1.disk) / 512;
} else {
- bs->total_sectors = le64_to_cpu(bochs.extra.redolog.disk) / 512;
+ bs->total_sectors = le64_to_cpu(bochs.extra.redolog.disk) / 512;
}
- s->catalog_size = le32_to_cpu(bochs.extra.redolog.catalog);
+ s->catalog_size = le32_to_cpu(bochs.catalog);
s->catalog_bitmap = g_malloc(s->catalog_size * 4);
ret = bdrv_pread(bs->file, le32_to_cpu(bochs.header), s->catalog_bitmap,
@@ -154,10 +137,10 @@ static int bochs_open(BlockDriverState *bs, QDict *options, int flags,
s->data_offset = le32_to_cpu(bochs.header) + (s->catalog_size * 4);
- s->bitmap_blocks = 1 + (le32_to_cpu(bochs.extra.redolog.bitmap) - 1) / 512;
- s->extent_blocks = 1 + (le32_to_cpu(bochs.extra.redolog.extent) - 1) / 512;
+ s->bitmap_blocks = 1 + (le32_to_cpu(bochs.bitmap) - 1) / 512;
+ s->extent_blocks = 1 + (le32_to_cpu(bochs.extent) - 1) / 512;
- s->extent_size = le32_to_cpu(bochs.extra.redolog.extent);
+ s->extent_size = le32_to_cpu(bochs.extent);
qemu_co_mutex_init(&s->lock);
return 0;
--
1.9.0
next prev parent reply other threads:[~2014-04-01 17:20 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-01 17:18 [Qemu-devel] [PULL for-2.0 00/51] Block patches Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 01/51] qemu-img: Release reference to BlockDriverState Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 02/51] vvfat: Fix :floppy: option to suppress partition table Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 03/51] qcow2: fix two memory leaks in qcow2_open error code path Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 04/51] qemu-iotests: add ./check -cloop support Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 05/51] qemu-iotests: add cloop input validation tests Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 06/51] block/cloop: validate block_size header field (CVE-2014-0144) Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 07/51] block/cloop: prevent offsets_size integer overflow (CVE-2014-0143) Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 08/51] block/cloop: refuse images with huge offsets arrays (CVE-2014-0144) Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 09/51] block/cloop: refuse images with bogus offsets (CVE-2014-0144) Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 10/51] block/cloop: fix offsets[] size off-by-one Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 11/51] qemu-iotests: Support for bochs format Stefan Hajnoczi
2014-04-01 17:18 ` Stefan Hajnoczi [this message]
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 13/51] bochs: Use unsigned variables for offsets and sizes (CVE-2014-0147) Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 14/51] bochs: Check catalog_size header field (CVE-2014-0143) Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 15/51] bochs: Check extent_size header field (CVE-2014-0142) Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 16/51] bochs: Fix bitmap offset calculation Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 17/51] vpc/vhd: add bounds check for max_table_entries and block_size (CVE-2014-0144) Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 18/51] vpc: Validate block size (CVE-2014-0142) Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 19/51] vdi: add bounds checks for blocks_in_image and disk_size header fields (CVE-2014-0144) Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 20/51] vhdx: Bounds checking for block_size and logical_sector_size (CVE-2014-0148) Stefan Hajnoczi
2014-04-01 17:18 ` [Qemu-devel] [PULL for-2.0 21/51] curl: check data size before memcpy to local buffer. (CVE-2014-0144) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 22/51] qcow2: Check header_length (CVE-2014-0144) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 23/51] qcow2: Check backing_file_offset (CVE-2014-0144) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 24/51] qcow2: Check refcount table size (CVE-2014-0144) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 25/51] qcow2: Validate refcount table offset Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 26/51] qcow2: Validate snapshot table offset/size (CVE-2014-0144) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 27/51] qcow2: Validate active L1 table offset and size (CVE-2014-0144) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 28/51] qcow2: Fix backing file name length check Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 29/51] qcow2: Don't rely on free_cluster_index in alloc_refcount_block() (CVE-2014-0147) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 30/51] qcow2: Avoid integer overflow in get_refcount (CVE-2014-0143) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 31/51] qcow2: Check new refcount table size on growth Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 32/51] qcow2: Fix types in qcow2_alloc_clusters and alloc_clusters_noref Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 33/51] qcow2: Protect against some integer overflows in bdrv_check Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 34/51] qcow2: Fix new L1 table size check (CVE-2014-0143) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 35/51] dmg: coding style and indentation cleanup Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 36/51] dmg: prevent out-of-bounds array access on terminator Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 37/51] dmg: drop broken bdrv_pread() loop Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 38/51] dmg: use appropriate types when reading chunks Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 39/51] dmg: sanitize chunk length and sectorcount (CVE-2014-0145) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 40/51] dmg: use uint64_t consistently for sectors and lengths Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 41/51] dmg: prevent chunk buffer overflow (CVE-2014-0145) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 42/51] block: vdi bounds check qemu-io tests Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 43/51] block: Limit request size (CVE-2014-0143) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 44/51] qcow2: Fix copy_sectors() with VM state Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 45/51] qcow2: Fix NULL dereference in qcow2_open() error path (CVE-2014-0146) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 46/51] qcow2: Fix L1 allocation size in qcow2_snapshot_load_tmp() (CVE-2014-0145) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 47/51] qcow2: Check maximum L1 size in qcow2_snapshot_load_tmp() (CVE-2014-0143) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 48/51] qcow2: Limit snapshot table size Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 49/51] parallels: Fix catalog size integer overflow (CVE-2014-0143) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 50/51] parallels: Sanity check for s->tracks (CVE-2014-0142) Stefan Hajnoczi
2014-04-01 17:19 ` [Qemu-devel] [PULL for-2.0 51/51] qcow2: link all L2 meta updates in preallocate() Stefan Hajnoczi
2014-04-01 17:39 ` [Qemu-devel] [PULL for-2.0 00/51] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396372769-11688-13-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).