From: Peter Maydell <peter.maydell@linaro.org>
To: Anthony Liguori <aliguori@amazon.com>
Cc: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 06/10] target-arm: A64: Fix a typo when declaring TLBI ops
Date: Thu, 1 May 2014 15:55:03 +0100 [thread overview]
Message-ID: <1398956107-7411-7-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1398956107-7411-1-git-send-email-peter.maydell@linaro.org>
From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
Harmless typo as opc1 defaults to zero and opc2 gets
re-declared to its correct value.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1398926097-28097-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target-arm/helper.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 7823e8c..3be917c 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1908,51 +1908,51 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.access = PL1_W, .type = ARM_CP_NOP },
/* TLBI operations */
{ .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 0,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbiall_write },
{ .name = "TLBI_VAE1IS", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 1,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbi_aa64_va_write },
{ .name = "TLBI_ASIDE1IS", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 2,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbi_aa64_asid_write },
{ .name = "TLBI_VAAE1IS", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 3,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbi_aa64_vaa_write },
{ .name = "TLBI_VALE1IS", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 5,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbi_aa64_va_write },
{ .name = "TLBI_VAALE1IS", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 7,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbi_aa64_vaa_write },
{ .name = "TLBI_VMALLE1", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 0,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbiall_write },
{ .name = "TLBI_VAE1", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 1,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbi_aa64_va_write },
{ .name = "TLBI_ASIDE1", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 2,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbi_aa64_asid_write },
{ .name = "TLBI_VAAE1", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 3,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbi_aa64_vaa_write },
{ .name = "TLBI_VALE1", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 5,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbi_aa64_va_write },
{ .name = "TLBI_VAALE1", .state = ARM_CP_STATE_AA64,
- .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 7,
+ .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7,
.access = PL1_W, .type = ARM_CP_NO_MIGRATE,
.writefn = tlbi_aa64_vaa_write },
#ifndef CONFIG_USER_ONLY
--
1.9.2
next prev parent reply other threads:[~2014-05-01 15:09 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-01 14:54 [Qemu-devel] [PULL 00/10] target-arm queue Peter Maydell
2014-05-01 14:54 ` [Qemu-devel] [PULL 01/10] target-arm: Implement XScale cache lockdown operations as NOPs Peter Maydell
2014-05-01 14:54 ` [Qemu-devel] [PULL 02/10] armv7m_nvic: fix CPUID Base Register Peter Maydell
2014-05-01 14:55 ` [Qemu-devel] [PULL 03/10] target-arm: implement WFE/YIELD as a yield for AArch64 Peter Maydell
2014-05-01 14:55 ` [Qemu-devel] [PULL 04/10] target-arm: Make vbar_write 64bit friendly on 32bit hosts Peter Maydell
2014-05-01 14:55 ` [Qemu-devel] [PULL 05/10] target-arm: A64: Handle blr lr Peter Maydell
2014-05-01 14:55 ` Peter Maydell [this message]
2014-05-01 14:55 ` [Qemu-devel] [PULL 07/10] target-arm: Correct a comment refering to EL0 Peter Maydell
2014-05-01 14:55 ` [Qemu-devel] [PULL 08/10] hw/arm/virt: Create the GIC ourselves rather than (ab)using a15mpcore_priv Peter Maydell
2014-05-01 14:55 ` [Qemu-devel] [PULL 09/10] hw/arm/virt: Put GIC register banks on 64K boundaries Peter Maydell
2014-05-01 14:55 ` [Qemu-devel] [PULL 10/10] hw/arm/virt: Add support for Cortex-A57 Peter Maydell
2014-05-02 11:11 ` [Qemu-devel] [PULL 00/10] target-arm queue Peter Maydell
2014-05-04 18:30 ` Richard W.M. Jones
2014-05-04 18:48 ` Peter Maydell
2014-05-04 18:58 ` Richard W.M. Jones
2014-05-04 19:36 ` Peter Maydell
2014-05-04 19:45 ` Richard W.M. Jones
2014-05-04 19:55 ` Peter Maydell
2014-05-04 19:29 ` Richard W.M. Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398956107-7411-7-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=aliguori@amazon.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).