qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: qemu-devel@nongnu.org
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>,
	qemu-ppc@nongnu.org, Alexander Graf <agraf@suse.de>
Subject: [Qemu-devel] [PATCH 1/6] xics: add flags for interrupts
Date: Wed,  7 May 2014 16:01:53 +1000	[thread overview]
Message-ID: <1399442518-26303-2-git-send-email-aik@ozlabs.ru> (raw)
In-Reply-To: <1399442518-26303-1-git-send-email-aik@ozlabs.ru>

The existing interrupt allocation scheme in SPAPR assumes that
interrupts are allocated at the start time, continously and the config
will not change. However, there are cases when this is not going to work
such as:

1. migration - we will have to have an ability to choose interrupt
numbers for devices in the command line and this will create gaps in
interrupt space.

2. PCI hotplug - interrupts from unplugged device need to be returned
back to interrupt pool, otherwise we will quickly run out of interrupts.

This replaces a separate lslsi[] array with a byte in the ICSIRQState
struct and defines "LSI" and "MSI" flags. Neither of these flags set
signals that the descriptor is not allocated and not in use.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 hw/intc/xics.c        | 21 ++++++++++++++-------
 hw/intc/xics_kvm.c    |  5 ++---
 include/hw/ppc/xics.h |  5 ++++-
 3 files changed, 20 insertions(+), 11 deletions(-)

diff --git a/hw/intc/xics.c b/hw/intc/xics.c
index 64aabe7..1f89a00 100644
--- a/hw/intc/xics.c
+++ b/hw/intc/xics.c
@@ -438,7 +438,7 @@ static void ics_set_irq(void *opaque, int srcno, int val)
 {
     ICSState *ics = (ICSState *)opaque;
 
-    if (ics->islsi[srcno]) {
+    if (ics->irqs[srcno].flags & XICS_FLAGS_LSI) {
         set_irq_lsi(ics, srcno, val);
     } else {
         set_irq_msi(ics, srcno, val);
@@ -475,7 +475,7 @@ static void ics_write_xive(ICSState *ics, int nr, int server,
 
     trace_xics_ics_write_xive(nr, srcno, server, priority);
 
-    if (ics->islsi[srcno]) {
+    if (ics->irqs[srcno].flags & XICS_FLAGS_LSI) {
         write_xive_lsi(ics, srcno);
     } else {
         write_xive_msi(ics, srcno);
@@ -497,7 +497,7 @@ static void ics_resend(ICSState *ics)
 
     for (i = 0; i < ics->nr_irqs; i++) {
         /* FIXME: filter by server#? */
-        if (ics->islsi[i]) {
+        if (ics->irqs[i].flags & XICS_FLAGS_LSI) {
             resend_lsi(ics, i);
         } else {
             resend_msi(ics, i);
@@ -512,7 +512,7 @@ static void ics_eoi(ICSState *ics, int nr)
 
     trace_xics_ics_eoi(nr);
 
-    if (ics->islsi[srcno]) {
+    if (ics->irqs[srcno].flags & XICS_FLAGS_LSI) {
         irq->status &= ~XICS_STATUS_SENT;
     }
 }
@@ -609,7 +609,6 @@ static void ics_realize(DeviceState *dev, Error **errp)
         return;
     }
     ics->irqs = g_malloc0(ics->nr_irqs * sizeof(ICSIRQState));
-    ics->islsi = g_malloc0(ics->nr_irqs * sizeof(bool));
     ics->qirqs = qemu_allocate_irqs(ics_set_irq, ics, ics->nr_irqs);
 }
 
@@ -646,11 +645,19 @@ qemu_irq xics_get_qirq(XICSState *icp, int irq)
     return icp->ics->qirqs[irq - icp->ics->offset];
 }
 
+static void ics_set_irq_type(ICSState *ics, int srcno, bool lsi)
+{
+    ics->irqs[srcno].flags |=
+        lsi ? XICS_FLAGS_LSI : XICS_FLAGS_MSI;
+}
+
 void xics_set_irq_type(XICSState *icp, int irq, bool lsi)
 {
-    assert(ics_valid_irq(icp->ics, irq));
+    ICSState *ics = icp->ics;
 
-    icp->ics->islsi[irq - icp->ics->offset] = lsi;
+    assert(ics_valid_irq(ics, irq));
+
+    ics_set_irq_type(ics, irq - ics->offset, lsi);
 }
 
 /*
diff --git a/hw/intc/xics_kvm.c b/hw/intc/xics_kvm.c
index 09476ae..456fc2c 100644
--- a/hw/intc/xics_kvm.c
+++ b/hw/intc/xics_kvm.c
@@ -224,7 +224,7 @@ static int ics_set_kvm_state(ICSState *ics, int version_id)
             state |= KVM_XICS_MASKED;
         }
 
-        if (ics->islsi[i]) {
+        if (ics->irqs[i].flags & XICS_FLAGS_LSI) {
             state |= KVM_XICS_LEVEL_SENSITIVE;
             if (irq->status & XICS_STATUS_ASSERTED) {
                 state |= KVM_XICS_PENDING;
@@ -253,7 +253,7 @@ static void ics_kvm_set_irq(void *opaque, int srcno, int val)
     int rc;
 
     args.irq = srcno + ics->offset;
-    if (!ics->islsi[srcno]) {
+    if (ics->irqs[srcno].flags & XICS_FLAGS_MSI) {
         if (!val) {
             return;
         }
@@ -290,7 +290,6 @@ static void ics_kvm_realize(DeviceState *dev, Error **errp)
         return;
     }
     ics->irqs = g_malloc0(ics->nr_irqs * sizeof(ICSIRQState));
-    ics->islsi = g_malloc0(ics->nr_irqs * sizeof(bool));
     ics->qirqs = qemu_allocate_irqs(ics_kvm_set_irq, ics, ics->nr_irqs);
 }
 
diff --git a/include/hw/ppc/xics.h b/include/hw/ppc/xics.h
index 0d7673d..aad48cf 100644
--- a/include/hw/ppc/xics.h
+++ b/include/hw/ppc/xics.h
@@ -136,7 +136,6 @@ struct ICSState {
     uint32_t nr_irqs;
     uint32_t offset;
     qemu_irq *qirqs;
-    bool *islsi;
     ICSIRQState *irqs;
     XICSState *icp;
 };
@@ -150,6 +149,10 @@ struct ICSIRQState {
 #define XICS_STATUS_REJECTED           0x4
 #define XICS_STATUS_MASKED_PENDING     0x8
     uint8_t status;
+/* @flags == 0 measn the interrupt is not allocated */
+#define XICS_FLAGS_LSI                 0x1
+#define XICS_FLAGS_MSI                 0x2
+    uint8_t flags;
 };
 
 qemu_irq xics_get_qirq(XICSState *icp, int irq);
-- 
1.8.4.rc4

  reply	other threads:[~2014-05-07  6:02 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-07  6:01 [Qemu-devel] [PATCH 0/6] move interrupts from spapr to xics Alexey Kardashevskiy
2014-05-07  6:01 ` Alexey Kardashevskiy [this message]
2014-05-07 13:09   ` [Qemu-devel] [PATCH 1/6] xics: add flags for interrupts Mike Day
2014-05-09  3:12     ` Alexey Kardashevskiy
2014-05-09 12:20       ` Mike Day
2014-05-08 11:52   ` Alexander Graf
2014-05-08 12:08     ` [Qemu-devel] [Qemu-ppc] " Alexander Graf
2014-05-07  6:01 ` [Qemu-devel] [PATCH 2/6] xics: add find_server Alexey Kardashevskiy
2014-05-07 13:14   ` Mike Day
2014-05-07  6:01 ` [Qemu-devel] [PATCH 3/6] xics: disable flags reset on xics reset Alexey Kardashevskiy
2014-05-08 11:57   ` Alexander Graf
2014-05-07  6:01 ` [Qemu-devel] [PATCH 4/6] spapr: move interrupt allocator to xics Alexey Kardashevskiy
2014-05-07  6:01 ` [Qemu-devel] [PATCH 5/6] spapr: remove @next_irq Alexey Kardashevskiy
2014-05-07  6:01 ` [Qemu-devel] [PATCH 6/6] xics: implement xics_ics_free() Alexey Kardashevskiy
2014-05-08 12:07   ` Alexander Graf
2014-05-09  2:13     ` Alexey Kardashevskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1399442518-26303-2-git-send-email-aik@ozlabs.ru \
    --to=aik@ozlabs.ru \
    --cc=agraf@suse.de \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).