[Qemu-devel] [PULL v2 07/11] smbus: allow returning an error from reads

["Michael S. Tsirkin" <mst@redhat.com>]

From: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/i2c/smbus.h | 6 +++---
 hw/i2c/smbus.c         | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/hw/i2c/smbus.h b/include/hw/i2c/smbus.h
index 63f0cc4..285d3b5 100644
--- a/include/hw/i2c/smbus.h
+++ b/include/hw/i2c/smbus.h
@@ -67,11 +67,11 @@ struct SMBusDevice {
 
 /* Master device commands.  */
 void smbus_quick_command(I2CBus *bus, uint8_t addr, int read);
-uint8_t smbus_receive_byte(I2CBus *bus, uint8_t addr);
+int smbus_receive_byte(I2CBus *bus, uint8_t addr);
 void smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data);
-uint8_t smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command);
+int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command);
 void smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data);
-uint16_t smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command);
+int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command);
 void smbus_write_word(I2CBus *bus, uint8_t addr, uint8_t command, uint16_t data);
 int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data);
 void smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
diff --git a/hw/i2c/smbus.c b/hw/i2c/smbus.c
index 3febf3c..190f08e 100644
--- a/hw/i2c/smbus.c
+++ b/hw/i2c/smbus.c
@@ -214,7 +214,7 @@ void smbus_quick_command(I2CBus *bus, uint8_t addr, int read)
     i2c_end_transfer(bus);
 }
 
-uint8_t smbus_receive_byte(I2CBus *bus, uint8_t addr)
+int smbus_receive_byte(I2CBus *bus, uint8_t addr)
 {
     uint8_t data;
 
@@ -232,7 +232,7 @@ void smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data)
     i2c_end_transfer(bus);
 }
 
-uint8_t smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command)
+int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command)
 {
     uint8_t data;
     i2c_start_transfer(bus, addr, 0);
@@ -252,7 +252,7 @@ void smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data)
     i2c_end_transfer(bus);
 }
 
-uint16_t smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command)
+int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command)
 {
     uint16_t data;
     i2c_start_transfer(bus, addr, 0);
-- 
MST