qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Luiz Capitulino <lcapitulino@redhat.com>
To: peter.maydell@linaro.org
Cc: qemu-devel@nongnu.org, anthony@codemonkey.ws
Subject: [Qemu-devel] [PULL 15/38] pci-assign: propagate errors from get_real_device()
Date: Thu,  8 May 2014 14:52:39 -0400	[thread overview]
Message-ID: <1399575182-9768-16-git-send-email-lcapitulino@redhat.com> (raw)
In-Reply-To: <1399575182-9768-1-git-send-email-lcapitulino@redhat.com>

From: Laszlo Ersek <lersek@redhat.com>

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
 hw/i386/kvm/pci-assign.c | 40 ++++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/hw/i386/kvm/pci-assign.c b/hw/i386/kvm/pci-assign.c
index e89bb6a..c6d1094 100644
--- a/hw/i386/kvm/pci-assign.c
+++ b/hw/i386/kvm/pci-assign.c
@@ -532,7 +532,7 @@ static void get_real_device_id(const char *devpath, uint16_t *val,
     get_real_id(devpath, "device", val, errp);
 }
 
-static int get_real_device(AssignedDevice *pci_dev)
+static void get_real_device(AssignedDevice *pci_dev, Error **errp)
 {
     char dir[128], name[128];
     int fd, r = 0;
@@ -556,16 +556,15 @@ static int get_real_device(AssignedDevice *pci_dev)
                                                   pci_dev->configfd_name,
                                                   &local_err);
         if (local_err) {
-            qerror_report_err(local_err);
-            error_free(local_err);
-            return 1;
+            error_propagate(errp, local_err);
+            return;
         }
     } else {
         dev->config_fd = open(name, O_RDWR);
 
         if (dev->config_fd == -1) {
-            error_report("%s: %s: %m", __func__, name);
-            return 1;
+            error_setg_file_open(errp, errno, name);
+            return;
         }
     }
 again:
@@ -575,8 +574,10 @@ again:
         if (errno == EINTR || errno == EAGAIN) {
             goto again;
         }
-        error_report("%s: read failed, errno = %d", __func__, errno);
-        return 1;
+        error_setg_errno(errp, errno, "read(\"%s\")",
+                         (pci_dev->configfd_name && *pci_dev->configfd_name) ?
+                         pci_dev->configfd_name : name);
+        return;
     }
 
     /* Restore or clear multifunction, this is always controlled by qemu */
@@ -596,8 +597,8 @@ again:
 
     f = fopen(name, "r");
     if (f == NULL) {
-        error_report("%s: %s: %m", __func__, name);
-        return 1;
+        error_setg_file_open(errp, errno, name);
+        return;
     }
 
     for (r = 0; r < PCI_ROM_SLOT; r++) {
@@ -642,9 +643,8 @@ again:
     /* read and fill vendor ID */
     get_real_vendor_id(dir, &id, &local_err);
     if (local_err) {
-        error_report("%s", error_get_pretty(local_err));
-        error_free(local_err);
-        return 1;
+        error_propagate(errp, local_err);
+        return;
     }
     pci_dev->dev.config[0] = id & 0xff;
     pci_dev->dev.config[1] = (id & 0xff00) >> 8;
@@ -652,9 +652,8 @@ again:
     /* read and fill device ID */
     get_real_device_id(dir, &id, &local_err);
     if (local_err) {
-        error_report("%s", error_get_pretty(local_err));
-        error_free(local_err);
-        return 1;
+        error_propagate(errp, local_err);
+        return;
     }
     pci_dev->dev.config[2] = id & 0xff;
     pci_dev->dev.config[3] = (id & 0xff00) >> 8;
@@ -663,7 +662,6 @@ again:
                                  PCI_COMMAND_MASTER | PCI_COMMAND_INTX_DISABLE);
 
     dev->region_number = r;
-    return 0;
 }
 
 static void free_msi_virqs(AssignedDevice *dev)
@@ -1751,6 +1749,7 @@ static int assigned_initfn(struct PCIDevice *pci_dev)
     AssignedDevice *dev = DO_UPCAST(AssignedDevice, dev, pci_dev);
     uint8_t e_intx;
     int r;
+    Error *local_err = NULL;
 
     if (!kvm_enabled()) {
         error_report("pci-assign: error: requires KVM support");
@@ -1783,9 +1782,10 @@ static int assigned_initfn(struct PCIDevice *pci_dev)
     memcpy(dev->emulate_config_write, dev->emulate_config_read,
            sizeof(dev->emulate_config_read));
 
-    if (get_real_device(dev)) {
-        error_report("pci-assign: Error: Couldn't get real device (%s)!",
-                     dev->dev.qdev.id);
+    get_real_device(dev, &local_err);
+    if (local_err) {
+        qerror_report_err(local_err);
+        error_free(local_err);
         goto out;
     }
 
-- 
1.9.0

  parent reply	other threads:[~2014-05-08 18:53 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-08 18:52 [Qemu-devel] [PULL 00/38] QMP queue Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 01/38] qapi: [trivial] Break long command lines Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 02/38] qapi: [trivial] Do not catch unknown exceptions in "test-qapi.py" Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 03/38] qapi: Use an explicit input file Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 04/38] qapi: Add a primitive to include other files from a QAPI schema file Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 05/38] qapi: treat all negative return of strtosz_suffix() as error Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 06/38] cutils: tighten qemu_parse_fd() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 07/38] monitor: add Error-propagating monitor_handle_fd_param2() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 08/38] pci-assign: accept Error from monitor_handle_fd_param2() Luiz Capitulino
2014-05-09 22:48   ` Eric Blake
2014-05-12 12:58     ` Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 09/38] pci-assign: make assign_failed_examine() just format the cause Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 10/38] pci-assign: propagate errors from get_real_id() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 11/38] pci-assign: propagate Error from check_irqchip_in_kernel() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 12/38] pci: add Error-propagating pci_add_capability2() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 13/38] pci-assign: accept Error from pci_add_capability2() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 14/38] pci-assign: assignment should fail if we can't read config space Luiz Capitulino
2014-05-08 18:52 ` Luiz Capitulino [this message]
2014-05-08 18:52 ` [Qemu-devel] [PULL 16/38] pci-assign: propagate errors from assigned_device_pci_cap_init() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 17/38] pci-assign: propagate errors from assigned_dev_register_msix_mmio() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 18/38] pci-assign: propagate errors from assigned_dev_register_regions() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 19/38] pci-assign: propagate errors from assign_device() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 20/38] pci-assign: propagate errors from assign_intx() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 21/38] pci-assign: assigned_initfn(): set monitor error in common error handler Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 22/38] qmp hmp: Consistently name Error * objects err, and not errp Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 23/38] qga: Consistently name Error ** objects errp, and not err Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 24/38] qmp: " Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 25/38] error: " Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 26/38] qga: Use return values instead of error_is_set(errp) Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 27/38] hmp: Guard against misuse of hmp_handle_error() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 28/38] qapi: Drop redundant, unclean error_is_set() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 29/38] tests/qapi-schema: Drop superfluous error_is_set() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 30/38] qapi: Clean up fragile use of error_is_set() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 31/38] qga: " Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 32/38] qga: Drop superfluous error_is_set() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 33/38] qemu-option: Clean up fragile use of error_is_set() Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 34/38] dump: Drop pointless error_is_set(), DumpState member errp Luiz Capitulino
2014-05-08 18:52 ` [Qemu-devel] [PULL 35/38] qmp: Don't use error_is_set() to suppress additional errors Luiz Capitulino
2014-05-08 18:53 ` [Qemu-devel] [PULL 36/38] qmp: use valid JSON in transaction example Luiz Capitulino
2014-05-08 18:53 ` [Qemu-devel] [PULL 37/38] qapi: Document optional arguments' backwards compatibility Luiz Capitulino
2014-05-08 18:53 ` [Qemu-devel] [PULL 38/38] Revert "qapi: Clean up superfluous null check in qapi_dealloc_type_str()" Luiz Capitulino
2014-05-09 11:57 ` [Qemu-devel] [PULL 00/38] QMP queue Peter Maydell
2014-05-09 12:54   ` Markus Armbruster
2014-05-09 12:58     ` Luiz Capitulino
2014-05-09 13:50   ` Luiz Capitulino
2014-05-09 15:47     ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1399575182-9768-16-git-send-email-lcapitulino@redhat.com \
    --to=lcapitulino@redhat.com \
    --cc=anthony@codemonkey.ws \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).