qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Cornelia Huck <cornelia.huck@de.ibm.com>
To: qemu-devel@nongnu.org
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Cornelia Huck <cornelia.huck@de.ibm.com>,
	qemu-ppc@nongnu.org, Alexander Graf <agraf@suse.de>
Subject: [Qemu-devel] [PATCH] kvm: make one_reg helpers available for everyone
Date: Fri,  9 May 2014 10:06:46 +0200	[thread overview]
Message-ID: <1399622806-61662-1-git-send-email-cornelia.huck@de.ibm.com> (raw)
In-Reply-To: <536C30DF.7080007@ozlabs.ru>

s390x introduced helper functions for getting/setting one_regs with
commit 860643bc. However, nothing about these is s390-specific.

Alexey Kardashevskiy had already posted a general version, so let's
merge the two patches and massage the code a bit.

CC: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
---
 include/sysemu/kvm.h | 20 ++++++++++++++++++++
 kvm-all.c            | 28 ++++++++++++++++++++++++++++
 target-s390x/kvm.c   | 29 -----------------------------
 trace-events         |  6 ++----
 4 files changed, 50 insertions(+), 33 deletions(-)

diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index 5ad4e0e..a6c2823 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -383,4 +383,24 @@ void kvm_init_irq_routing(KVMState *s);
  *          > 0: irq chip was created
  */
 int kvm_arch_irqchip_create(KVMState *s);
+
+/**
+ * kvm_set_one_reg - set a register value in KVM via KVM_SET_ONE_REG ioctl
+ * @id: The register ID
+ * @source: The pointer to the value to be set. It must point to a variable
+ *          of the correct type/size for the register being accessed.
+ *
+ * Returns: 0 on success, or a negative errno on failure.
+ */
+int kvm_set_one_reg(CPUState *cs, uint64_t id, void *source);
+
+/**
+ * kvm_get_one_reg - get a register value from KVM via KVM_GET_ONE_REG ioctl
+ * @id: The register ID
+ * @target: The pointer where the value is to be stored. It must point to a
+ *          variable of the correct type/size for the register being accessed.
+ *
+ * Returns: 0 on success, or a negative errno on failure.
+ */
+int kvm_get_one_reg(CPUState *cs, uint64_t id, void *target);
 #endif
diff --git a/kvm-all.c b/kvm-all.c
index 5cb7f26..94520e5 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -2114,3 +2114,31 @@ int kvm_create_device(KVMState *s, uint64_t type, bool test)
 
     return test ? 0 : create_dev.fd;
 }
+
+int kvm_set_one_reg(CPUState *cs, uint64_t id, void *source)
+{
+    struct kvm_one_reg reg;
+    int r;
+
+    reg.id = id;
+    reg.addr = (uintptr_t) source;
+    r = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
+    if (r) {
+        trace_kvm_failed_reg_set(id, strerror(r));
+    }
+    return r;
+}
+
+int kvm_get_one_reg(CPUState *cs, uint64_t id, void *target)
+{
+    struct kvm_one_reg reg;
+    int r;
+
+    reg.id = id;
+    reg.addr = (uintptr_t) target;
+    r = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg);
+    if (r) {
+        trace_kvm_failed_reg_get(id, strerror(r));
+    }
+    return r;
+}
diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c
index b7b0edc..ba2dffe 100644
--- a/target-s390x/kvm.c
+++ b/target-s390x/kvm.c
@@ -129,35 +129,6 @@ void kvm_arch_reset_vcpu(CPUState *cpu)
     }
 }
 
-static int kvm_set_one_reg(CPUState *cs, uint64_t id, void *source)
-{
-    struct kvm_one_reg reg;
-    int r;
-
-    reg.id = id;
-    reg.addr = (uint64_t) source;
-    r = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
-    if (r) {
-        trace_kvm_failed_reg_set(id, strerror(errno));
-    }
-    return r;
-}
-
-static int kvm_get_one_reg(CPUState *cs, uint64_t id, void *target)
-{
-    struct kvm_one_reg reg;
-    int r;
-
-    reg.id = id;
-    reg.addr = (uint64_t) target;
-    r = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg);
-    if (r) {
-        trace_kvm_failed_reg_get(id, strerror(errno));
-    }
-    return r;
-}
-
-
 int kvm_arch_put_registers(CPUState *cs, int level)
 {
     S390CPU *cpu = S390_CPU(cs);
diff --git a/trace-events b/trace-events
index af4449d..2c5b307 100644
--- a/trace-events
+++ b/trace-events
@@ -1230,6 +1230,8 @@ kvm_run_exit(int cpu_index, uint32_t reason) "cpu_index %d, reason %d"
 kvm_device_ioctl(int fd, int type, void *arg) "dev fd %d, type 0x%x, arg %p"
 kvm_failed_spr_set(int str, const char *msg) "Warning: Unable to set SPR %d to KVM: %s"
 kvm_failed_spr_get(int str, const char *msg) "Warning: Unable to retrieve SPR %d from KVM: %s"
+kvm_failed_reg_get(uint64_t id, const char *msg) "Warning: Unable to retrieve ONEREG %" PRIu64 " from KVM: %s"
+kvm_failed_reg_set(uint64_t id, const char *msg) "Warning: Unable to set ONEREG %" PRIu64 " to KVM: %s"
 
 # memory.c
 memory_region_ops_read(void *mr, uint64_t addr, uint64_t value, unsigned size) "mr %p addr %#"PRIx64" value %#"PRIx64" size %u"
@@ -1246,7 +1248,3 @@ xen_pv_mmio_write(uint64_t addr) "WARNING: write to Xen PV Device MMIO space (ad
 # hw/pci/pci_host.c
 pci_cfg_read(const char *dev, unsigned devid, unsigned fnid, unsigned offs, unsigned val) "%s %02u:%u @0x%x -> 0x%x"
 pci_cfg_write(const char *dev, unsigned devid, unsigned fnid, unsigned offs, unsigned val) "%s %02u:%u @0x%x <- 0x%x"
-
-# target-s390/kvm.c
-kvm_failed_reg_get(uint64_t id, const char *msg) "Warning: Unable to retrieve ONEREG %" PRIu64 " from KVM: %s"
-kvm_failed_reg_set(uint64_t id, const char *msg) "Warning: Unable to set ONEREG %" PRIu64 " to KVM: %s"
-- 
1.8.5.5

  reply	other threads:[~2014-05-09  8:07 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-03 13:14 [Qemu-devel] [PATCH 0/4] power7/8 migration patches Alexey Kardashevskiy
2014-04-03 13:14 ` [Qemu-devel] [PATCH 1/4] kvm: Add set_one_reg/get_one_reg helpers Alexey Kardashevskiy
2014-05-08 12:27   ` Alexander Graf
2014-05-09  1:35     ` Alexey Kardashevskiy
2014-05-09  8:06       ` Cornelia Huck [this message]
2014-05-13 10:01         ` [Qemu-devel] [PATCH] kvm: make one_reg helpers available for everyone Alexander Graf
2014-04-03 13:14 ` [Qemu-devel] [PATCH 2/4] spapr: Enable DABRX special register Alexey Kardashevskiy
2014-04-03 13:19   ` Alexander Graf
2014-04-04  6:13     ` Alexey Kardashevskiy
2014-04-04 12:21       ` Alexander Graf
2014-04-03 18:42   ` Tom Musta
2014-04-04  0:51     ` Alexey Kardashevskiy
2014-04-04 12:40       ` Tom Musta
2014-04-03 13:14 ` [Qemu-devel] [PATCH 3/4] KVM: PPC: Support POWER8 registers Alexey Kardashevskiy
2014-04-03 13:33   ` Alexander Graf
2014-04-03 19:12     ` Tom Musta
2014-04-04  6:58       ` Alexey Kardashevskiy
2014-04-04 12:23         ` Alexander Graf
2014-04-03 13:14 ` [Qemu-devel] [PATCH 4/4] spapr: Add support for time base offset migration Alexey Kardashevskiy
2014-04-10 12:34   ` Alexander Graf
2014-04-10 14:31     ` Alexey Kardashevskiy
2014-04-11  9:40       ` Alexander Graf
2014-04-11 21:55         ` Benjamin Herrenschmidt
2014-04-11 22:59           ` Alexander Graf
2014-04-11 23:03             ` [Qemu-devel] [Qemu-ppc] " Alexander Graf
2014-04-12  3:44           ` [Qemu-devel] " Alexey Kardashevskiy
2014-04-12  7:25             ` Alexander Graf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1399622806-61662-1-git-send-email-cornelia.huck@de.ibm.com \
    --to=cornelia.huck@de.ibm.com \
    --cc=agraf@suse.de \
    --cc=aik@ozlabs.ru \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).