qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: Anthony Liguori <aliguori@amazon.com>
Cc: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 06/17] hw/net/stellaris_enet: Correctly implement the TR and THR registers
Date: Tue, 13 May 2014 16:31:28 +0100	[thread overview]
Message-ID: <1399995099-26635-7-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1399995099-26635-1-git-send-email-peter.maydell@linaro.org>

Packet transmission for the stellaris ethernet controller can be triggered
in one of two ways:
 * by setting a threshold value in the THR register; when the FIFO
   fill level reaches the threshold, the h/w starts transmitting.
   Software has to finish filling the FIFO before the transmit
   process completes to avoid a (silent) underrun
 * by software writing to the TR register to explicitly trigger
   transmission

Since QEMU transmits packets instantaneously (from the guest's
point of view), implement "transmit based on threshold" with
our existing mechanism of "transmit as soon as we have the whole
packet", with the additional wrinkle that we don't transmit if
the packet size is below the specified threshold, and implement
"transmit by specific request" properly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 hw/net/stellaris_enet.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/hw/net/stellaris_enet.c b/hw/net/stellaris_enet.c
index b99f93e..2079fc6 100644
--- a/hw/net/stellaris_enet.c
+++ b/hw/net/stellaris_enet.c
@@ -109,6 +109,15 @@ static inline bool stellaris_txpacket_complete(stellaris_enet_state *s)
     return s->tx_fifo_len >= framelen;
 }
 
+/* Return true if the TX FIFO threshold is enabled and the FIFO
+ * has filled enough to reach it.
+ */
+static inline bool stellaris_tx_thr_reached(stellaris_enet_state *s)
+{
+    return (s->thr < 0x3f &&
+            (s->tx_fifo_len >= 4 * (s->thr * 8 + 1)));
+}
+
 /* Send the packet currently in the TX FIFO */
 static void stellaris_enet_send(stellaris_enet_state *s)
 {
@@ -309,7 +318,7 @@ static void stellaris_enet_write(void *opaque, hwaddr offset,
             s->tx_fifo[s->tx_fifo_len++] = value >> 24;
         }
 
-        if (stellaris_txpacket_complete(s)) {
+        if (stellaris_tx_thr_reached(s) && stellaris_txpacket_complete(s)) {
             stellaris_enet_send(s);
         }
         break;
@@ -338,9 +347,13 @@ static void stellaris_enet_write(void *opaque, hwaddr offset,
     case 0x2c: /* MTXD */
         s->mtxd = value & 0xff;
         break;
+    case 0x38: /* TR */
+        if (value & 1) {
+            stellaris_enet_send(s);
+        }
+        break;
     case 0x30: /* MRXD */
     case 0x34: /* NP */
-    case 0x38: /* TR */
         /* Ignored.  */
     case 0x3c: /* Undocuented: Timestamp? */
         /* Ignored.  */
-- 
1.9.2

  parent reply	other threads:[~2014-05-13 15:31 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-13 15:31 [Qemu-devel] [PULL 00/17] target-arm queue Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 01/17] disas/libvixl: Update to libvixl 1.4 Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 02/17] savevm: Remove all the unneeded version_minimum_id_old (arm) Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 03/17] hw/net/stellaris_enet: Restructure tx_fifo code to avoid buffer overrun Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 04/17] hw/net/stellaris_enet: Correct handling of packet padding Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 05/17] hw/net/stellaris_enet: Rewrite tx fifo handling code Peter Maydell
2014-05-13 15:31 ` Peter Maydell [this message]
2014-05-13 15:31 ` [Qemu-devel] [PULL 07/17] hw/net/stellaris_enet: Fix debug format strings Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 08/17] hw/net/stellaris_enet: Get rid of rx_fifo pointer Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 09/17] hw/net/stellaris_enet: Convert to vmstate Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 10/17] target-arm/helper.c: Don't flush the TLB if SCTLR is rewritten unchanged Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 11/17] hw/intc/allwinner-a10-pic: Add missing 'break' Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 12/17] hw/net/cadence_gem: Remove dead code Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 13/17] hw/arm/omap1: Avoid unintended sign extension writing omap_rtc YEARS_REG Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 14/17] hw/dma/omap_dma: Add (uint32_t) casts when shifting uint16_t by 16 Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 15/17] hw/timer/exynos4210_mct: Avoid overflow in exynos4210_ltick_recalc_count Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 16/17] hw/arm/stellaris: Correct handling of GPTM TAR register Peter Maydell
2014-05-13 15:31 ` [Qemu-devel] [PULL 17/17] hw/arm/omap_gpmc: Avoid buffer overrun filling prefetch FIFO Peter Maydell
2014-05-15 16:07 ` [Qemu-devel] [PULL 00/17] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1399995099-26635-7-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=aliguori@amazon.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).