From: Tiejun Chen <tiejun.chen@intel.com>
To: anthony.perard@citrix.com, stefano.stabellini@eu.citrix.com,
mst@redhat.com, Kelly.Zytaruk@amd.com
Cc: peter.maydell@linaro.org, xen-devel@lists.xensource.com,
weidong.han@intel.com, allen.m.kay@intel.com,
qemu-devel@nongnu.org, jean.guyader@eu.citrix.com,
anthony@codemonkey.ws, yang.z.zhang@Intel.com
Subject: [Qemu-devel] [v2][PATCH 0/8] xen: add Intel IGD passthrough support
Date: Fri, 16 May 2014 18:53:36 +0800 [thread overview]
Message-ID: <1400237624-8505-1-git-send-email-tiejun.chen@intel.com> (raw)
v2:
* rebase on current qemu tree.
* retrieve VGA bios from sysfs properly.
* redefine some function name.
* introduce bitmap to manage registe/runregister pci dev, and provide
a common way to reserve some specific devfn.
* introduce is_igd_passthrough() to make sure we touch physical host
bridge only in IGD case.
* We should return zero as an invalid address value while calling
igd_read_opregion().
Additionally, now its also not necessary to recompile seabios with some
extra steps like v1.
The following patches are ported partially from Xen Qemu-traditional
branch which are adding Intel IGD passthrough supporting to Qemu upstream.
To pass through IGD to guest, user need to add following lines in Xen config
file:
gfx_passthru=1
pci=['00:02.0 <at> 2']
Now successfully boot Ubuntu 14.04 guests with IGD assigned in Haswell
desktop with Latest Xen + Qemu upstream.
----------------------------------------------------------------
Tiejun Chen (5):
pci: use bitmap to manage registe/runregister pci device
pci: provide a way to reserve some specific devfn
xen, gfx passthrough: reserve 00:02.0 for INTEL IGD
xen, gfx passthrough: create intel isa bridge
xen, gfx passthrough: create host bridge to passthrough
Yang Zhang (3):
xen, gfx passthrough: basic graphics passthrough support
xen, gfx passthrough: support Intel IGD passthrough with VT-D
xen, gfx passthrough: add opregion mapping
hw/pci-host/piix.c | 64 ++++++++++++++++++++-
hw/pci/pci.c | 23 +++++++-
hw/xen/Makefile.objs | 2 +-
hw/xen/xen-host-pci-device.c | 5 ++
hw/xen/xen-host-pci-device.h | 1 +
hw/xen/xen_pt.c | 10 ++++
hw/xen/xen_pt.h | 12 +++-
hw/xen/xen_pt_config_init.c | 45 ++++++++++++++-
hw/xen/xen_pt_graphics.c | 435 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/hw/pci/pci.h | 1 +
include/hw/pci/pci_bus.h | 1 +
qemu-options.hx | 9 +++
vl.c | 11 +++-
13 files changed, 612 insertions(+), 7 deletions(-)
create mode 100644 hw/xen/xen_pt_graphics.c
Thanks
Tiejun
next reply other threads:[~2014-05-16 10:55 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-16 10:53 Tiejun Chen [this message]
2014-05-16 10:53 ` [Qemu-devel] [v2][PATCH 1/8] pci: use bitmap to manage registe/runregister pci device Tiejun Chen
2014-05-16 10:53 ` [Qemu-devel] [v2][PATCH 2/8] pci: provide a way to reserve some specific devfn Tiejun Chen
2014-05-16 14:07 ` [Qemu-devel] [Xen-devel] " Konrad Rzeszutek Wilk
2014-05-19 9:43 ` Chen, Tiejun
2014-05-16 10:53 ` [Qemu-devel] [v2][PATCH 3/8] xen, gfx passthrough: basic graphics passthrough support Tiejun Chen
2014-05-16 14:06 ` [Qemu-devel] [Xen-devel] " Konrad Rzeszutek Wilk
2014-05-19 9:42 ` Chen, Tiejun
2014-05-19 13:35 ` Konrad Rzeszutek Wilk
2014-05-20 9:32 ` Chen, Tiejun
2014-05-19 12:10 ` Stefano Stabellini
2014-05-20 5:09 ` Chen, Tiejun
2014-05-16 10:53 ` [Qemu-devel] [v2][PATCH 4/8] xen, gfx passthrough: reserve 00:02.0 for INTEL IGD Tiejun Chen
2014-05-16 14:08 ` [Qemu-devel] [Xen-devel] " Konrad Rzeszutek Wilk
2014-05-19 9:54 ` Chen, Tiejun
2014-05-19 6:44 ` [Qemu-devel] " Gerd Hoffmann
2014-05-19 7:48 ` [Qemu-devel] [Xen-devel] " Fabio Fantoni
2014-05-19 8:15 ` Zhang, Yang Z
2014-05-19 9:34 ` Chen, Tiejun
2014-05-19 9:25 ` [Qemu-devel] " Chen, Tiejun
2014-05-19 10:13 ` Michael S. Tsirkin
2014-05-20 9:34 ` Chen, Tiejun
2014-05-20 11:36 ` Michael S. Tsirkin
2014-05-19 11:22 ` Gerd Hoffmann
2014-05-19 12:04 ` Chen, Tiejun
2014-05-19 13:50 ` Gerd Hoffmann
2014-05-19 14:00 ` Daniel P. Berrange
2014-05-21 7:07 ` Chen, Tiejun
2014-05-22 0:31 ` Chen, Tiejun
2014-05-22 5:39 ` Gerd Hoffmann
2014-05-22 6:18 ` Chen, Tiejun
2014-05-22 6:44 ` Gerd Hoffmann
2014-05-22 6:49 ` Michael S. Tsirkin
2014-05-22 7:11 ` Chen, Tiejun
2014-05-22 10:50 ` Chen, Tiejun
2014-05-22 11:03 ` Gonglei (Arei)
2014-05-22 11:22 ` Gerd Hoffmann
2014-05-23 1:07 ` Chen, Tiejun
2014-05-22 11:25 ` Michael S. Tsirkin
2014-05-22 14:20 ` [Qemu-devel] [Xen-devel] " Igor Mammedov
2014-05-23 1:18 ` Chen, Tiejun
2014-05-23 7:38 ` Igor Mammedov
2014-05-23 10:52 ` Anthony PERARD
2014-05-23 11:40 ` Stefano Stabellini
2014-05-23 11:53 ` Gerd Hoffmann
2014-05-23 12:06 ` Igor Mammedov
2014-05-23 12:16 ` Igor Mammedov
2014-05-22 9:58 ` Konrad Rzeszutek Wilk
2014-05-20 14:45 ` [Qemu-devel] " Anthony PERARD
2014-05-21 1:25 ` Chen, Tiejun
2014-06-25 2:49 ` Chen, Tiejun
2014-06-25 23:04 ` Slutz, Donald Christopher
2014-06-26 2:00 ` Chen, Tiejun
2014-06-26 8:23 ` Chen, Tiejun
2014-06-26 16:58 ` Don Slutz
2014-06-30 9:29 ` Gerd Hoffmann
2014-06-30 10:23 ` Chen, Tiejun
2014-05-16 10:53 ` [Qemu-devel] [v2][PATCH 5/8] xen, gfx passthrough: create intel isa bridge Tiejun Chen
2014-05-16 14:11 ` [Qemu-devel] [Xen-devel] " Konrad Rzeszutek Wilk
2014-05-19 9:59 ` Chen, Tiejun
2014-05-16 10:53 ` [Qemu-devel] [v2][PATCH 6/8] xen, gfx passthrough: support Intel IGD passthrough with VT-D Tiejun Chen
2014-05-16 14:35 ` [Qemu-devel] [Xen-devel] " Konrad Rzeszutek Wilk
2014-05-19 0:58 ` Zhang, Yang Z
2014-05-19 13:34 ` Konrad Rzeszutek Wilk
2014-05-20 5:13 ` Chen, Tiejun
2014-05-20 13:39 ` Konrad Rzeszutek Wilk
2014-05-19 10:02 ` Chen, Tiejun
2014-05-16 10:53 ` [Qemu-devel] [v2][PATCH 7/8] xen, gfx passthrough: create host bridge to passthrough Tiejun Chen
2014-05-16 14:37 ` [Qemu-devel] [Xen-devel] " Konrad Rzeszutek Wilk
2014-05-19 10:03 ` Chen, Tiejun
2014-05-16 10:53 ` [Qemu-devel] [v2][PATCH 8/8] xen, gfx passthrough: add opregion mapping Tiejun Chen
2014-05-19 11:53 ` Stefano Stabellini
2014-05-20 9:24 ` Chen, Tiejun
2014-05-20 10:50 ` Stefano Stabellini
2014-05-21 0:57 ` Chen, Tiejun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400237624-8505-1-git-send-email-tiejun.chen@intel.com \
--to=tiejun.chen@intel.com \
--cc=Kelly.Zytaruk@amd.com \
--cc=allen.m.kay@intel.com \
--cc=anthony.perard@citrix.com \
--cc=anthony@codemonkey.ws \
--cc=jean.guyader@eu.citrix.com \
--cc=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=weidong.han@intel.com \
--cc=xen-devel@lists.xensource.com \
--cc=yang.z.zhang@Intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).