From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: qemu-devel@nongnu.org
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>,
qemu-ppc@nongnu.org, Alexander Graf <agraf@suse.de>
Subject: [Qemu-devel] [PATCH 3/9] spapr_pci: Introduce a finish_realize() callback
Date: Thu, 22 May 2014 00:21:14 +1000 [thread overview]
Message-ID: <1400682080-30724-4-git-send-email-aik@ozlabs.ru> (raw)
In-Reply-To: <1400682080-30724-1-git-send-email-aik@ozlabs.ru>
The spapr-pci PHB initializes IOMMU for emulated devices only.
The upcoming VFIO support will do it different. However both emulated
and VFIO PHB types share most of the initialization code.
For the type specific things a new finish_realize() callback is
introduced.
This introduces sPAPRPHBClass derived from PCIHostBridgeClass and
adds the callback pointer.
This implements finish_realize() for emulated devices.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
The difference to VFIO is that for VFIO we have to ask the kernel
about DMA window size before calling spapr_tce_new_table() and
then we have to tell VFIO KVM device about LIOBN <-> IOMMU link.
---
hw/ppc/spapr_pci.c | 38 ++++++++++++++++++++++++++------------
include/hw/pci-host/spapr.h | 14 ++++++++++++++
2 files changed, 40 insertions(+), 12 deletions(-)
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 1db73f2..b141e83 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -528,6 +528,7 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
SysBusDevice *s = SYS_BUS_DEVICE(dev);
sPAPRPHBState *sphb = SPAPR_PCI_HOST_BRIDGE(s);
PCIHostState *phb = PCI_HOST_BRIDGE(s);
+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(s);
char *namebuf;
int i;
PCIBus *bus;
@@ -609,18 +610,6 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
PCI_DEVFN(0, 0), PCI_NUM_PINS, TYPE_PCI_BUS);
phb->bus = bus;
- sphb->dma_window_start = 0;
- sphb->dma_window_size = 0x40000000;
- sphb->tcet = spapr_tce_new_table(dev, sphb->dma_liobn,
- sphb->dma_window_size);
- if (!sphb->tcet) {
- error_setg(errp, "Unable to create TCE table for %s",
- sphb->dtbusname);
- return;
- }
- address_space_init(&sphb->iommu_as, spapr_tce_get_iommu(sphb->tcet),
- sphb->dtbusname);
-
pci_setup_iommu(bus, spapr_pci_dma_iommu, sphb);
pci_bus_set_route_irq_fn(bus, spapr_route_intx_pin_to_irq);
@@ -639,6 +628,28 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
sphb->lsi_table[i].irq = irq;
}
+
+ if (!info->finish_realize) {
+ error_setg(errp, "finish_realize not defined");
+ return;
+ }
+
+ info->finish_realize(sphb, errp);
+}
+
+static void spapr_phb_finish_realize(sPAPRPHBState *sphb, Error **errp)
+{
+ sphb->dma_window_start = 0;
+ sphb->dma_window_size = 0x40000000;
+ sphb->tcet = spapr_tce_new_table(DEVICE(sphb), sphb->dma_liobn,
+ sphb->dma_window_size);
+ if (!sphb->tcet) {
+ error_setg(errp, "Unable to create TCE table for %s",
+ sphb->dtbusname);
+ return ;
+ }
+ address_space_init(&sphb->iommu_as, spapr_tce_get_iommu(sphb->tcet),
+ sphb->dtbusname);
}
static void spapr_phb_reset(DeviceState *qdev)
@@ -722,6 +733,7 @@ static void spapr_phb_class_init(ObjectClass *klass, void *data)
{
PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
+ sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_CLASS(klass);
hc->root_bus_path = spapr_phb_root_bus_path;
dc->realize = spapr_phb_realize;
@@ -730,6 +742,7 @@ static void spapr_phb_class_init(ObjectClass *klass, void *data)
dc->vmsd = &vmstate_spapr_pci;
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
dc->cannot_instantiate_with_device_add_yet = false;
+ spc->finish_realize = spapr_phb_finish_realize;
}
static const TypeInfo spapr_phb_info = {
@@ -737,6 +750,7 @@ static const TypeInfo spapr_phb_info = {
.parent = TYPE_PCI_HOST_BRIDGE,
.instance_size = sizeof(sPAPRPHBState),
.class_init = spapr_phb_class_init,
+ .class_size = sizeof(sPAPRPHBClass),
};
PCIHostState *spapr_create_phb(sPAPREnvironment *spapr, int index)
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index 970b4a9..ab29281 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -34,6 +34,20 @@
#define SPAPR_PCI_HOST_BRIDGE(obj) \
OBJECT_CHECK(sPAPRPHBState, (obj), TYPE_SPAPR_PCI_HOST_BRIDGE)
+#define SPAPR_PCI_HOST_BRIDGE_CLASS(klass) \
+ OBJECT_CLASS_CHECK(sPAPRPHBClass, (klass), TYPE_SPAPR_PCI_HOST_BRIDGE)
+#define SPAPR_PCI_HOST_BRIDGE_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(sPAPRPHBClass, (obj), TYPE_SPAPR_PCI_HOST_BRIDGE)
+
+typedef struct sPAPRPHBClass sPAPRPHBClass;
+typedef struct sPAPRPHBState sPAPRPHBState;
+
+struct sPAPRPHBClass {
+ PCIHostBridgeClass parent_class;
+
+ void (*finish_realize)(sPAPRPHBState *sphb, Error **errp);
+};
+
typedef struct sPAPRPHBState {
PCIHostState parent_obj;
--
1.9.rc0
next prev parent reply other threads:[~2014-05-21 14:21 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-21 14:21 [Qemu-devel] [PATCH 0/9] spapr_pci: Prepare for VFIO Alexey Kardashevskiy
2014-05-21 14:21 ` [Qemu-devel] [PATCH 1/9] spapr: Enable dynamic change of the supported hypercalls list Alexey Kardashevskiy
2014-05-21 14:26 ` Alexander Graf
2014-05-21 15:21 ` [Qemu-devel] [PATCH v2] " Alexey Kardashevskiy
2014-05-22 10:47 ` Alexander Graf
2014-05-22 11:01 ` Alexey Kardashevskiy
2014-05-22 11:02 ` Alexander Graf
2014-05-21 14:21 ` [Qemu-devel] [PATCH 2/9] spapr_iommu: Enable multiple TCE requests Alexey Kardashevskiy
2014-05-21 14:37 ` Alexander Graf
2014-05-21 15:23 ` [Qemu-devel] [PATCH v2] " Alexey Kardashevskiy
2014-05-21 16:03 ` Alexey Kardashevskiy
2014-05-21 21:54 ` Alexander Graf
2014-05-21 14:21 ` Alexey Kardashevskiy [this message]
2014-05-21 14:21 ` [Qemu-devel] [PATCH 4/9] spapr_pci: spapr_iommu: Make DMA window a subregion Alexey Kardashevskiy
2014-05-21 14:21 ` [Qemu-devel] [PATCH 5/9] spapr_pci: Allow multiple TCE tables per PHB Alexey Kardashevskiy
2014-05-21 14:21 ` [Qemu-devel] [PATCH 6/9] spapr_iommu: Convert old qdev_init_nofail() to object_property_set_bool Alexey Kardashevskiy
2014-05-21 14:21 ` [Qemu-devel] [PATCH 7/9] spapr_iommu: Get rid of window_size in sPAPRTCETable Alexey Kardashevskiy
2014-05-21 22:05 ` Alexander Graf
2014-05-21 14:21 ` [Qemu-devel] [PATCH 8/9] spapr_iommu: Introduce page_shift " Alexey Kardashevskiy
2014-05-21 22:11 ` Alexander Graf
2014-05-21 23:45 ` Alexey Kardashevskiy
2014-05-22 10:09 ` Alexander Graf
2014-05-22 10:24 ` Alexey Kardashevskiy
2014-05-22 10:45 ` Alexander Graf
2014-05-22 10:46 ` Alexey Kardashevskiy
2014-05-22 10:48 ` Alexander Graf
2014-05-22 10:55 ` Alexey Kardashevskiy
2014-05-22 4:25 ` Alexey Kardashevskiy
2014-05-22 7:11 ` Alexander Graf
2014-05-21 14:21 ` [Qemu-devel] [PATCH 9/9] spapr_iommu: Introduce bus_offset " Alexey Kardashevskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400682080-30724-4-git-send-email-aik@ozlabs.ru \
--to=aik@ozlabs.ru \
--cc=agraf@suse.de \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).