[Qemu-devel] [PATCH v3 1/7] iotests: Allow out-of-tree run

[Max Reitz <mreitz@redhat.com>]

As out-of-tree builds are preferred for qemu, running the qemu-iotests
in that out-of-tree build should be supported as well. To do so, a
symbolic link has to be created pointing to the check script in the
source directory. That script will check whether it has been run through
a symlink, and if so, will assume it is run in the build tree. All
output and temporary operations performed by iotests are then redirected
here and, unless specified otherwise by the user, QEMU_PROG etc. will be
set to paths appropriate for the build tree.

Also, drop making every test case executable if it is not yet, as this
would modify the source tree which is not desired for out-of-tree runs
and should be fixed in the repository anyway.

Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 tests/qemu-iotests/check         | 98 ++++++++++++++++++++++++++++++++++------
 tests/qemu-iotests/common        |  8 ++--
 tests/qemu-iotests/common.config |  2 +-
 tests/qemu-iotests/common.rc     |  8 ++--
 tests/qemu-iotests/iotests.py    |  3 +-
 5 files changed, 94 insertions(+), 25 deletions(-)

diff --git a/tests/qemu-iotests/check b/tests/qemu-iotests/check
index e2ed5a9..bd917a1 100755
--- a/tests/qemu-iotests/check
+++ b/tests/qemu-iotests/check
@@ -34,22 +34,89 @@ timestamp=${TIMESTAMP:=false}
 # generic initialization
 iam=check
 
+_init_error()
+{
+    echo "$iam: $1" >&2
+    exit 1
+}
+
+if [ -L "$0" ]
+then
+    # called from the build tree
+    source_iotests=$(dirname "$(readlink "$0")")
+    if [ -z "$source_iotests" ]
+    then
+        _init_error "failed to obtain source tree name from check symlink"
+    fi
+    source_iotests=$(cd "$source_iotests"; pwd) || _init_error "failed to enter source tree"
+    build_iotests=$PWD
+else
+    # called from the source tree
+    source_iotests=$PWD
+    # this may be an in-tree build (note that in the following code we may not
+    # assume that it truly as and always have to test whether the build results
+    # actually exist)
+    build_iotests=$PWD
+fi
+
+build_root="$build_iotests/../.."
+
+if [ -x "$build_iotests/socket_scm_helper" ]
+then
+    export SOCKET_SCM_HELPER="$build_iotests/socket_scm_helper"
+fi
+
+# if ./qemu exists, it should be prioritized and will be chosen by common.config
+if [[ -z "$QEMU_PROG" && ! -x './qemu' ]]
+then
+    arch=$(uname -m 2> /dev/null)
+
+    if [[ -n $arch && -x "$build_root/$arch-softmmu/qemu-system-$arch" ]]
+    then
+        export QEMU_PROG="$build_root/$arch-softmmu/qemu-system-$arch"
+    else
+        pushd -q "$build_root"
+        for binary in *-softmmu/qemu-system-*
+        do
+            if [ -x "$binary" ]
+            then
+                export QEMU_PROG="$build_root/$binary"
+                break
+            fi
+        done
+        popd -q
+    fi
+fi
+
+if [[ -z $QEMU_IMG_PROG && -x "$build_root/qemu-img" && ! -x './qemu-img' ]]
+then
+    export QEMU_IMG_PROG="$build_root/qemu-img"
+fi
+
+if [[ -z $QEMU_IO_PROG && -x "$build_root/qemu-io" && ! -x './qemu-io' ]]
+then
+    export QEMU_IO_PROG="$build_root/qemu-io"
+fi
+
+if [[ -z $QEMU_NBD_PROG && -x "$build_root/qemu-nbd" && ! -x './qemu-nbd' ]]
+then
+    export QEMU_NBD_PROG="$build_root/qemu-nbd"
+fi
+
 # we need common.config
-if ! . ./common.config
+if ! . "$source_iotests/common.config"
 then
-    echo "$iam: failed to source common.config"
-    exit 1
+    _init_error "failed to source common.config"
 fi
 
 # we need common.rc
-if ! . ./common.rc
+if ! . "$source_iotests/common.rc"
 then
-    echo "check: failed to source common.rc"
-    exit 1
+    _init_error "failed to source common.rc"
 fi
 
 # we need common
-. ./common
+. "$source_iotests/common"
 
 #if [ `id -u` -ne 0 ]
 #then
@@ -194,7 +261,7 @@ do
         echo " - expunged"
         rm -f $seq.out.bad
         echo "/^$seq\$/d" >>$tmp.expunged
-    elif [ ! -f $seq ]
+    elif [ ! -f "$source_iotests/$seq" ]
     then
         echo " - no such test?"
         echo "/^$seq\$/d" >>$tmp.expunged
@@ -215,9 +282,10 @@ do
 
         start=`_wallclock`
         $timestamp && echo -n "        ["`date "+%T"`"]"
-        [ ! -x $seq ] && chmod u+x $seq # ensure we can run it
+        export OUTPUT_DIR=$PWD
+        (cd "$source_iotests";
         MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(($RANDOM % 255 + 1))} \
-                ./$seq >$tmp.out 2>&1
+                ./$seq >$tmp.out 2>&1)
         sts=$?
         $timestamp && _timestamp
         stop=`_wallclock`
@@ -242,17 +310,17 @@ do
                 err=true
             fi
 
-            reference=$seq.out
+            reference="$source_iotests/$seq.out"
             if [ "$CACHEMODE" = "none" ]; then
-                [ -f $seq.out.nocache ] && reference=$seq.out.nocache
+                [ -f "$source_iotests/$seq.out.nocache" ] && reference="$source_iotests/$seq.out.nocache"
             fi
 
-            if [ ! -f $reference ]
+            if [ ! -f "$reference" ]
             then
                 echo " - no qualified output"
                 err=true
             else
-                if diff -w $reference $tmp.out >/dev/null 2>&1
+                if diff -w "$reference" $tmp.out >/dev/null 2>&1
                 then
                     echo ""
                     if $err
@@ -264,7 +332,7 @@ do
                 else
                     echo " - output mismatch (see $seq.out.bad)"
                     mv $tmp.out $seq.out.bad
-                    $diff -w $reference $seq.out.bad
+                    $diff -w "$reference" $seq.out.bad
                     err=true
                 fi
             fi
diff --git a/tests/qemu-iotests/common b/tests/qemu-iotests/common
index 0aaf84d..3c53c4f 100644
--- a/tests/qemu-iotests/common
+++ b/tests/qemu-iotests/common
@@ -59,7 +59,7 @@ do
     if $group
     then
         # arg after -g
-        group_list=`sed -n <group -e 's/$/ /' -e "/^[0-9][0-9][0-9].* $r /"'{
+        group_list=`sed -n <"$source_iotests/group" -e 's/$/ /' -e "/^[0-9][0-9][0-9].* $r /"'{
 s/ .*//p
 }'`
         if [ -z "$group_list" ]
@@ -84,7 +84,7 @@ s/ .*//p
     then
         # arg after -x
         [ ! -s $tmp.list ] && ls [0-9][0-9][0-9] [0-9][0-9][0-9][0-9] >$tmp.list 2>/dev/null
-        group_list=`sed -n <group -e 's/$/ /' -e "/^[0-9][0-9][0-9].* $r /"'{
+        group_list=`sed -n <"$source_iotests/group" -e 's/$/ /' -e "/^[0-9][0-9][0-9].* $r /"'{
 s/ .*//p
 }'`
         if [ -z "$group_list" ]
@@ -366,7 +366,7 @@ testlist options
 BEGIN        { for (t='$start'; t<='$end'; t++) printf "%03d\n",t }' \
         | while read id
         do
-            if grep -s "^$id " group >/dev/null
+            if grep -s "^$id " "$source_iotests/group" >/dev/null
             then
                 # in group file ... OK
                 echo $id >>$tmp.list
@@ -402,7 +402,7 @@ else
         touch $tmp.list
     else
         # no test numbers, do everything from group file
-        sed -n -e '/^[0-9][0-9][0-9]*/s/[         ].*//p' <group >$tmp.list
+        sed -n -e '/^[0-9][0-9][0-9]*/s/[         ].*//p' <"$source_iotests/group" >$tmp.list
     fi
 fi
 
diff --git a/tests/qemu-iotests/common.config b/tests/qemu-iotests/common.config
index d90a8bc..bd6790b 100644
--- a/tests/qemu-iotests/common.config
+++ b/tests/qemu-iotests/common.config
@@ -126,7 +126,7 @@ fi
 export TEST_DIR
 
 if [ -z "$SAMPLE_IMG_DIR" ]; then
-        SAMPLE_IMG_DIR=`pwd`/sample_images
+        SAMPLE_IMG_DIR="$source_iotests/sample_images"
 fi
 
 if [ ! -d "$SAMPLE_IMG_DIR" ]; then
diff --git a/tests/qemu-iotests/common.rc b/tests/qemu-iotests/common.rc
index 195c564..e0ea7e3 100644
--- a/tests/qemu-iotests/common.rc
+++ b/tests/qemu-iotests/common.rc
@@ -318,9 +318,9 @@ _do()
         status=1; exit
     fi
 
-    (eval "echo '---' \"$_cmd\"") >>$here/$seq.full
+    (eval "echo '---' \"$_cmd\"") >>"$OUTPUT_DIR/$seq.full"
     (eval "$_cmd") >$tmp._out 2>&1; ret=$?
-    cat $tmp._out >>$here/$seq.full
+    cat $tmp._out >>"$OUTPUT_DIR/$seq.full"
     if [ $# -eq 2 ]; then
         if [ $ret -eq 0 ]; then
             echo "done"
@@ -344,7 +344,7 @@ _do()
 #
 _notrun()
 {
-    echo "$*" >$seq.notrun
+    echo "$*" >"$OUTPUT_DIR/$seq.notrun"
     echo "$seq not run: $*"
     status=0
     exit
@@ -354,7 +354,7 @@ _notrun()
 #
 _fail()
 {
-    echo "$*" | tee -a $here/$seq.full
+    echo "$*" | tee -a "$OUTPUT_DIR/$seq.full"
     echo "(see $seq.full for details)"
     status=1
     exit 1
diff --git a/tests/qemu-iotests/iotests.py b/tests/qemu-iotests/iotests.py
index f6c437c..39a4cfc 100644
--- a/tests/qemu-iotests/iotests.py
+++ b/tests/qemu-iotests/iotests.py
@@ -37,6 +37,7 @@ qemu_args = os.environ.get('QEMU', 'qemu').strip().split(' ')
 imgfmt = os.environ.get('IMGFMT', 'raw')
 imgproto = os.environ.get('IMGPROTO', 'file')
 test_dir = os.environ.get('TEST_DIR', '/var/tmp')
+output_dir = os.environ.get('OUTPUT_DIR', '.')
 cachemode = os.environ.get('CACHEMODE')
 
 socket_scm_helper = os.environ.get('SOCKET_SCM_HELPER', 'socket_scm_helper')
@@ -278,7 +279,7 @@ def notrun(reason):
     # Each test in qemu-iotests has a number ("seq")
     seq = os.path.basename(sys.argv[0])
 
-    open('%s.notrun' % seq, 'wb').write(reason + '\n')
+    open('%s/%s.notrun' % (output_dir, seq), 'wb').write(reason + '\n')
     print '%s not run: %s' % (seq, reason)
     sys.exit(0)
 
-- 
1.9.3