From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org
Subject: [Qemu-devel] [PULL 04/24] tcg-mips: Fill the exit_tb delay slot
Date: Sat, 24 May 2014 08:53:41 -0700 [thread overview]
Message-ID: <1400946841-21079-5-git-send-email-rth@twiddle.net> (raw)
In-Reply-To: <1400946841-21079-1-git-send-email-rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
tcg/mips/tcg-target.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
diff --git a/tcg/mips/tcg-target.c b/tcg/mips/tcg-target.c
index d4236c0..2d2073f 100644
--- a/tcg/mips/tcg-target.c
+++ b/tcg/mips/tcg-target.c
@@ -392,8 +392,10 @@ static inline void tcg_out_movi(TCGContext *s, TCGType type,
} else if (arg == (uint16_t)arg) {
tcg_out_opc_imm(s, OPC_ORI, reg, TCG_REG_ZERO, arg);
} else {
- tcg_out_opc_imm(s, OPC_LUI, reg, 0, arg >> 16);
- tcg_out_opc_imm(s, OPC_ORI, reg, reg, arg & 0xffff);
+ tcg_out_opc_imm(s, OPC_LUI, reg, TCG_REG_ZERO, arg >> 16);
+ if (arg & 0xffff) {
+ tcg_out_opc_imm(s, OPC_ORI, reg, reg, arg & 0xffff);
+ }
}
}
@@ -1291,12 +1293,21 @@ static inline void tcg_out_op(TCGContext *s, TCGOpcode opc,
{
switch(opc) {
case INDEX_op_exit_tb:
- tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_V0, args[0]);
- if (!tcg_out_opc_jmp(s, OPC_J, tb_ret_addr)) {
- tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_AT, (uintptr_t)tb_ret_addr);
- tcg_out_opc_reg(s, OPC_JR, 0, TCG_REG_AT, 0);
+ {
+ uintptr_t a0 = args[0];
+ TCGReg b0 = TCG_REG_ZERO;
+
+ if (a0 & ~0xffff) {
+ tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_V0, a0 & ~0xffff);
+ b0 = TCG_REG_V0;
+ }
+ if (!tcg_out_opc_jmp(s, OPC_J, tb_ret_addr)) {
+ tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_AT,
+ (uintptr_t)tb_ret_addr);
+ tcg_out_opc_reg(s, OPC_JR, 0, TCG_REG_AT, 0);
+ }
+ tcg_out_opc_imm(s, OPC_ORI, TCG_REG_V0, b0, a0 & 0xffff);
}
- tcg_out_nop(s);
break;
case INDEX_op_goto_tb:
if (s->tb_jmp_offset) {
--
1.9.0
next prev parent reply other threads:[~2014-05-24 15:54 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-24 15:53 [Qemu-devel] [PULL 00/24] tcg mips updates Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 01/24] tcg-mips: Layout executable and code_gen_buffer Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 02/24] tcg-mips: Constrain the code_gen_buffer to be within one 256mb segment Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 03/24] tcg-mips: Use J and JAL opcodes Richard Henderson
2014-05-24 15:53 ` Richard Henderson [this message]
2014-05-24 15:53 ` [Qemu-devel] [PULL 05/24] tcg-mips: Split large ldst offsets Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 06/24] tcg-mips: Move softmmu slow path out of line Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 07/24] tcg-mips: Convert to new qemu_l/st helpers Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 08/24] tcg-mips: Convert to new_ldst Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 09/24] tcg-mips: Rearrange register allocation Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 10/24] tcg-mips: Introduce TCG_TMP0, TCG_TMP1 Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 11/24] tcg-mips: Use T9 for TCG_TMP1 Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 12/24] tcg-mips: Use EXT for AND on mips32r2 Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 13/24] tcg-mips: Name the opcode enumeration Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 14/24] tcg-mips: Fix subtract immediate range Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 15/24] tcg-mips: Hoist args loads Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 16/24] tcg-mips: Improve add2/sub2 Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 17/24] tcg-mips: Commonize opcode implementations Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 18/24] tcg-mips: Simplify setcond Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 19/24] tcg-mips: Simplify brcond Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 20/24] tcg-mips: Simplify setcond2 Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 21/24] tcg-mips: Improve setcond eq/ne vs zeros Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 22/24] tcg-mips: Simplify brcond2 Richard Henderson
2014-05-24 15:54 ` [Qemu-devel] [PULL 23/24] tcg-mips: Simplify movcond Richard Henderson
2014-05-24 15:54 ` [Qemu-devel] [PULL 24/24] tcg-mips: Enable direct chaining of TBs Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400946841-21079-5-git-send-email-rth@twiddle.net \
--to=rth@twiddle.net \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).