qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org
Subject: [Qemu-devel] [PULL 05/24] tcg-mips: Split large ldst offsets
Date: Sat, 24 May 2014 08:53:42 -0700	[thread overview]
Message-ID: <1400946841-21079-6-git-send-email-rth@twiddle.net> (raw)
In-Reply-To: <1400946841-21079-1-git-send-email-rth@twiddle.net>

Use this to reduce goto_tb by one insn.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
 tcg/mips/tcg-target.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/tcg/mips/tcg-target.c b/tcg/mips/tcg-target.c
index 2d2073f..5ccfb1d 100644
--- a/tcg/mips/tcg-target.c
+++ b/tcg/mips/tcg-target.c
@@ -480,16 +480,18 @@ static inline void tcg_out_ext16s(TCGContext *s, TCGReg ret, TCGReg arg)
     }
 }
 
-static inline void tcg_out_ldst(TCGContext *s, int opc, TCGArg arg,
-                                TCGReg arg1, TCGArg arg2)
+static void tcg_out_ldst(TCGContext *s, int opc, TCGReg data,
+                         TCGReg addr, intptr_t ofs)
 {
-    if (arg2 == (int16_t) arg2) {
-        tcg_out_opc_imm(s, opc, arg, arg1, arg2);
-    } else {
-        tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_AT, arg2);
-        tcg_out_opc_reg(s, OPC_ADDU, TCG_REG_AT, TCG_REG_AT, arg1);
-        tcg_out_opc_imm(s, opc, arg, TCG_REG_AT, 0);
+    int16_t lo = ofs;
+    if (ofs != lo) {
+        tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_AT, ofs - lo);
+        if (addr != TCG_REG_ZERO) {
+            tcg_out_opc_reg(s, OPC_ADDU, TCG_REG_AT, TCG_REG_AT, addr);
+        }
+        addr = TCG_REG_AT;
     }
+    tcg_out_opc_imm(s, opc, data, addr, lo);
 }
 
 static inline void tcg_out_ld(TCGContext *s, TCGType type, TCGReg arg,
@@ -1315,9 +1317,8 @@ static inline void tcg_out_op(TCGContext *s, TCGOpcode opc,
             tcg_abort();
         } else {
             /* indirect jump method */
-            tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_AT,
-                         (uintptr_t)(s->tb_next + args[0]));
-            tcg_out_ld(s, TCG_TYPE_PTR, TCG_REG_AT, TCG_REG_AT, 0);
+            tcg_out_ld(s, TCG_TYPE_PTR, TCG_REG_AT, TCG_REG_ZERO,
+                       (uintptr_t)(s->tb_next + args[0]));
             tcg_out_opc_reg(s, OPC_JR, 0, TCG_REG_AT, 0);
         }
         tcg_out_nop(s);
-- 
1.9.0

  parent reply	other threads:[~2014-05-24 15:54 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-24 15:53 [Qemu-devel] [PULL 00/24] tcg mips updates Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 01/24] tcg-mips: Layout executable and code_gen_buffer Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 02/24] tcg-mips: Constrain the code_gen_buffer to be within one 256mb segment Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 03/24] tcg-mips: Use J and JAL opcodes Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 04/24] tcg-mips: Fill the exit_tb delay slot Richard Henderson
2014-05-24 15:53 ` Richard Henderson [this message]
2014-05-24 15:53 ` [Qemu-devel] [PULL 06/24] tcg-mips: Move softmmu slow path out of line Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 07/24] tcg-mips: Convert to new qemu_l/st helpers Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 08/24] tcg-mips: Convert to new_ldst Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 09/24] tcg-mips: Rearrange register allocation Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 10/24] tcg-mips: Introduce TCG_TMP0, TCG_TMP1 Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 11/24] tcg-mips: Use T9 for TCG_TMP1 Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 12/24] tcg-mips: Use EXT for AND on mips32r2 Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 13/24] tcg-mips: Name the opcode enumeration Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 14/24] tcg-mips: Fix subtract immediate range Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 15/24] tcg-mips: Hoist args loads Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 16/24] tcg-mips: Improve add2/sub2 Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 17/24] tcg-mips: Commonize opcode implementations Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 18/24] tcg-mips: Simplify setcond Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 19/24] tcg-mips: Simplify brcond Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 20/24] tcg-mips: Simplify setcond2 Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 21/24] tcg-mips: Improve setcond eq/ne vs zeros Richard Henderson
2014-05-24 15:53 ` [Qemu-devel] [PULL 22/24] tcg-mips: Simplify brcond2 Richard Henderson
2014-05-24 15:54 ` [Qemu-devel] [PULL 23/24] tcg-mips: Simplify movcond Richard Henderson
2014-05-24 15:54 ` [Qemu-devel] [PULL 24/24] tcg-mips: Enable direct chaining of TBs Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1400946841-21079-6-git-send-email-rth@twiddle.net \
    --to=rth@twiddle.net \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).