From: Igor Mammedov <imammedo@redhat.com>
To: qemu-devel@nongnu.org
Cc: lcapitulino@redhat.com, aliguori@amazon.com, mst@redhat.com
Subject: [Qemu-devel] [PATCH v4 09/33] pc: implement pc-dimm device abstraction
Date: Mon, 2 Jun 2014 15:25:05 +0200 [thread overview]
Message-ID: <1401715529-636-10-git-send-email-imammedo@redhat.com> (raw)
In-Reply-To: <1401715529-636-1-git-send-email-imammedo@redhat.com>
From: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Each hotplug-able memory slot is a PCDIMMDevice.
A hot-add operation for a memory device:
- creates a new PCDIMMDevice and makes hotplug controller to map it into
guest address space
Hotplug operations are done through normal device_add commands.
For migration case, all hotplugged memory devices on source should be
specified on target's command line using '-device' option with
properties set to the same values as on source.
To simplify review, patch introduces only PCDIMMDevice QOM skeleton that
will be extended by following patches to implement actual memory hotplug
and related functions.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
v5:
rename DimmDevice to PCDIMMDevice
v4:
drop DimmBus in favor of bus-less device hotplug
rename property/field 'start' to 'addr'
use defines for property names
v3:
pc: compile memhotplug on i386 target too
v2:
fix typo s/DimmBus/DimmDevice/ in doc comment
s/klass/oc/;s/*/parent_obj/;a/gtk-doc markup/
---
default-configs/i386-softmmu.mak | 1 +
default-configs/x86_64-softmmu.mak | 1 +
hw/Makefile.objs | 1 +
hw/mem/Makefile.objs | 1 +
hw/mem/pc-dimm.c | 99 ++++++++++++++++++++++++++++++++++++
include/hw/mem/pc-dimm.h | 73 ++++++++++++++++++++++++++
6 files changed, 176 insertions(+), 0 deletions(-)
create mode 100644 hw/mem/Makefile.objs
create mode 100644 hw/mem/pc-dimm.c
create mode 100644 include/hw/mem/pc-dimm.h
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index 37ef90f..8e08841 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -44,3 +44,4 @@ CONFIG_APIC=y
CONFIG_IOAPIC=y
CONFIG_ICC_BUS=y
CONFIG_PVPANIC=y
+CONFIG_MEM_HOTPLUG=y
diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
index 31bddce..66557ac 100644
--- a/default-configs/x86_64-softmmu.mak
+++ b/default-configs/x86_64-softmmu.mak
@@ -44,3 +44,4 @@ CONFIG_APIC=y
CONFIG_IOAPIC=y
CONFIG_ICC_BUS=y
CONFIG_PVPANIC=y
+CONFIG_MEM_HOTPLUG=y
diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index d178b65..52a1464 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -29,6 +29,7 @@ devices-dirs-$(CONFIG_SOFTMMU) += usb/
devices-dirs-$(CONFIG_VIRTIO) += virtio/
devices-dirs-$(CONFIG_SOFTMMU) += watchdog/
devices-dirs-$(CONFIG_SOFTMMU) += xen/
+devices-dirs-$(CONFIG_MEM_HOTPLUG) += mem/
devices-dirs-y += core/
common-obj-y += $(devices-dirs-y)
obj-y += $(devices-dirs-y)
diff --git a/hw/mem/Makefile.objs b/hw/mem/Makefile.objs
new file mode 100644
index 0000000..b000fb4
--- /dev/null
+++ b/hw/mem/Makefile.objs
@@ -0,0 +1 @@
+common-obj-$(CONFIG_MEM_HOTPLUG) += pc-dimm.o
diff --git a/hw/mem/pc-dimm.c b/hw/mem/pc-dimm.c
new file mode 100644
index 0000000..b4937fe
--- /dev/null
+++ b/hw/mem/pc-dimm.c
@@ -0,0 +1,99 @@
+/*
+ * Dimm device for Memory Hotplug
+ *
+ * Copyright ProfitBricks GmbH 2012
+ * Copyright (C) 2014 Red Hat Inc
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ */
+
+#include "hw/mem/pc-dimm.h"
+#include "qemu/config-file.h"
+#include "qapi/visitor.h"
+
+static Property pc_dimm_properties[] = {
+ DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0),
+ DEFINE_PROP_UINT32(PC_DIMM_NODE_PROP, PCDIMMDevice, node, 0),
+ DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot,
+ PC_DIMM_UNASSIGNED_SLOT),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void pc_dimm_get_size(Object *obj, Visitor *v, void *opaque,
+ const char *name, Error **errp)
+{
+ int64_t value;
+ MemoryRegion *mr;
+ PCDIMMDevice *dimm = PC_DIMM(obj);
+
+ mr = host_memory_backend_get_memory(dimm->hostmem, errp);
+ value = memory_region_size(mr);
+
+ visit_type_int(v, &value, name, errp);
+}
+
+static void pc_dimm_init(Object *obj)
+{
+ PCDIMMDevice *dimm = PC_DIMM(obj);
+
+ object_property_add(obj, PC_DIMM_SIZE_PROP, "int", pc_dimm_get_size,
+ NULL, NULL, NULL, &error_abort);
+ object_property_add_link(obj, PC_DIMM_MEMDEV_PROP, TYPE_MEMORY_BACKEND,
+ (Object **)&dimm->hostmem,
+ qdev_prop_allow_set_link_before_realize,
+ OBJ_PROP_LINK_UNREF_ON_RELEASE,
+ &error_abort);
+}
+
+static void pc_dimm_realize(DeviceState *dev, Error **errp)
+{
+ PCDIMMDevice *dimm = PC_DIMM(dev);
+
+ if (!dimm->hostmem) {
+ error_setg(errp, "'" PC_DIMM_MEMDEV_PROP "' property is not set");
+ return;
+ }
+}
+
+static MemoryRegion *pc_dimm_get_memory_region(PCDIMMDevice *dimm)
+{
+ return host_memory_backend_get_memory(dimm->hostmem, &error_abort);
+}
+
+static void pc_dimm_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PCDIMMDeviceClass *ddc = PC_DIMM_CLASS(oc);
+
+ dc->realize = pc_dimm_realize;
+ dc->props = pc_dimm_properties;
+
+ ddc->get_memory_region = pc_dimm_get_memory_region;
+}
+
+static TypeInfo pc_dimm_info = {
+ .name = TYPE_PC_DIMM,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(PCDIMMDevice),
+ .instance_init = pc_dimm_init,
+ .class_init = pc_dimm_class_init,
+ .class_size = sizeof(PCDIMMDeviceClass),
+};
+
+static void pc_dimm_register_types(void)
+{
+ type_register_static(&pc_dimm_info);
+}
+
+type_init(pc_dimm_register_types)
diff --git a/include/hw/mem/pc-dimm.h b/include/hw/mem/pc-dimm.h
new file mode 100644
index 0000000..e1f5ca4
--- /dev/null
+++ b/include/hw/mem/pc-dimm.h
@@ -0,0 +1,73 @@
+/*
+ * PC DIMM device
+ *
+ * Copyright ProfitBricks GmbH 2012
+ * Copyright (C) 2013-2014 Red Hat Inc
+ *
+ * Authors:
+ * Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
+ * Igor Mammedov <imammedo@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef QEMU_PC_DIMM_H
+#define QEMU_PC_DIMM_H
+
+#include "exec/memory.h"
+#include "sysemu/hostmem.h"
+#include "hw/qdev.h"
+
+#define DEFAULT_PC_DIMMSIZE (1024*1024*1024)
+
+#define TYPE_PC_DIMM "pc-dimm"
+#define PC_DIMM(obj) \
+ OBJECT_CHECK(PCDIMMDevice, (obj), TYPE_PC_DIMM)
+#define PC_DIMM_CLASS(oc) \
+ OBJECT_CLASS_CHECK(PCDIMMDeviceClass, (oc), TYPE_PC_DIMM)
+#define PC_DIMM_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(PCDIMMDeviceClass, (obj), TYPE_PC_DIMM)
+
+#define PC_DIMM_ADDR_PROP "addr"
+#define PC_DIMM_SLOT_PROP "slot"
+#define PC_DIMM_NODE_PROP "node"
+#define PC_DIMM_SIZE_PROP "size"
+#define PC_DIMM_MEMDEV_PROP "memdev"
+
+#define PC_DIMM_UNASSIGNED_SLOT -1
+
+/**
+ * PCDIMMDevice:
+ * @addr: starting guest physical address, where @PCDIMMDevice is mapped.
+ * Default value: 0, means that address is auto-allocated.
+ * @node: numa node to which @PCDIMMDevice is attached.
+ * @slot: slot number into which @PCDIMMDevice is plugged in.
+ * Default value: -1, means that slot is auto-allocated.
+ * @hostmem: host memory backend providing memory for @PCDIMMDevice
+ */
+typedef struct PCDIMMDevice {
+ /* private */
+ DeviceState parent_obj;
+
+ /* public */
+ ram_addr_t addr;
+ uint32_t node;
+ int32_t slot;
+ HostMemoryBackend *hostmem;
+} PCDIMMDevice;
+
+/**
+ * PCDIMMDeviceClass:
+ * @get_memory_region: returns #MemoryRegion associated with @dimm
+ */
+typedef struct PCDIMMDeviceClass {
+ /* private */
+ DeviceClass parent_class;
+
+ /* public */
+ MemoryRegion *(*get_memory_region)(PCDIMMDevice *dimm);
+} PCDIMMDeviceClass;
+
+#endif
--
1.7.1
next prev parent reply other threads:[~2014-06-02 13:28 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-02 13:24 [Qemu-devel] [PATCH v4 00/33] pc: ACPI memory hotplug Igor Mammedov
2014-06-02 13:24 ` [Qemu-devel] [PATCH v4 01/33] pc: create custom generic PC machine type Igor Mammedov
2014-06-02 13:24 ` [Qemu-devel] [PATCH v4 02/33] pc: ACPI BIOS: use enum for defining memory affinity flags Igor Mammedov
2014-06-02 13:24 ` [Qemu-devel] [PATCH v4 03/33] object_add: allow completion handler to get canonical path Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 04/33] vl.c: daemonize before guest memory allocation Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 05/33] add memdev backend infrastructure Igor Mammedov
2014-06-05 21:36 ` Don Slutz
2014-06-06 15:54 ` [Qemu-devel] [PATCH v4.1 5/33 FIXED] " Igor Mammedov
2014-06-06 17:25 ` Don Slutz
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 06/33] vl.c: extend -m option to support options for memory hotplug Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 07/33] qdev: hotplug for buss-less devices Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 08/33] qdev: expose DeviceState.hotplugged field as a property Igor Mammedov
2014-06-02 13:25 ` Igor Mammedov [this message]
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 10/33] memory: add memory_region_is_mapped() API Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 11/33] pc-dimm: do not allow to set already used memdev Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 12/33] pc: initialize memory hotplug address space Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 13/33] pc: exit QEMU if number of slots more than supported 256 Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 14/33] pc: add 'etc/reserved-memory-end' fw_cfg interface for SeaBIOS Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 15/33] pc: exit QEMU if compat machine doesn't support memory hotlpug Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 16/33] pc: add memory hotplug handler to PC_MACHINE Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 17/33] pc-dimm: add busy address check and address auto-allocation Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 18/33] pc-dimm: add busy slot check and slot auto-allocation Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 19/33] acpi: rename cpu_hotplug_defs.h to pc-hotplug.h Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 20/33] acpi: memory hotplug ACPI hardware implementation Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 21/33] trace: add acpi memory hotplug IO region events Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 22/33] trace: pc: add PC_DIMM slot & address allocation Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 23/33] acpi:piix4: allow plug/unlug callbacks handle not only PCI devices Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 24/33] acpi:piix4: add memory hotplug handling Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 25/33] pc: ich9 lpc: make it work with global/compat properties Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 26/33] acpi:ich9: add memory hotplug handling Igor Mammedov
2014-06-08 11:57 ` Michael S. Tsirkin
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 27/33] pc: migrate piix4 & ich9 MemHotplugState Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 28/33] pc: add acpi-device link to PCMachineState Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 29/33] pc: propagate memory hotplug event to ACPI device Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 30/33] pc: ACPI BIOS: implement memory hotplug interface Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 31/33] pc: add "hotplug-memory-region-size" property to PC_MACHINE Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 32/33] pc: ACPI BIOS: reserve SRAT entry for hotplug mem hole Igor Mammedov
2014-06-02 13:25 ` [Qemu-devel] [PATCH v4 33/33] pc: ACPI BIOS: make GPE.3 handle memory hotplug event on PIIX and Q35 machines Igor Mammedov
2014-06-06 12:44 ` Don Slutz
2014-06-06 15:23 ` Igor Mammedov
2014-06-08 7:43 ` Michael S. Tsirkin
2014-06-02 14:32 ` [Qemu-devel] [PATCH v4 00/33] pc: ACPI memory hotplug Eric Blake
2014-06-02 14:50 ` Igor Mammedov
2014-06-08 13:01 ` Michael S. Tsirkin
2014-06-11 7:13 ` Santosh Shukla
2014-06-11 8:08 ` Michael S. Tsirkin
2014-06-11 9:35 ` Santosh Shukla
2014-06-11 9:54 ` Michael S. Tsirkin
2014-06-11 10:22 ` Santosh Shukla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401715529-636-10-git-send-email-imammedo@redhat.com \
--to=imammedo@redhat.com \
--cc=aliguori@amazon.com \
--cc=lcapitulino@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).