qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Gabriel L. Somlo" <gsomlo@gmail.com>
To: qemu-devel@nongnu.org
Cc: peter.crosthwaite@xilinx.com, romain@dolbeau.org, mst@redhat.com,
	agraf@suse.de, stefanha@redhat.com, pbonzini@redhat.com,
	afaerber@suse.de
Subject: [Qemu-devel] [PATCH v4 3/3] e1000: remove broken support for 82573L
Date: Mon,  2 Jun 2014 09:33:29 -0400	[thread overview]
Message-ID: <1401716009-7005-4-git-send-email-somlo@cmu.edu> (raw)
In-Reply-To: <1401716009-7005-1-git-send-email-somlo@cmu.edu>

Currently, e1000 support is based on the manual for the 8254xx
model series. 82573x models are documented in a separate manual
(see http://www.intel.com/content/dam/www/public/us/en/documents/manuals/pcie-gbe-controllers-open-source-manual.pdf)
and the 82573L device ID no longer works correctly on either Linux
(3.14.*) or Windows 7.

This patch removes stale code claiming to support 82573L, cleaning
up the code base for the remaining 8254xx model series.

Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/net/e1000.c     | 18 ------------------
 tests/e1000-test.c |  1 -
 2 files changed, 19 deletions(-)

diff --git a/hw/net/e1000.c b/hw/net/e1000.c
index 1c51be8..47e0775 100644
--- a/hw/net/e1000.c
+++ b/hw/net/e1000.c
@@ -70,8 +70,6 @@ static int debugflags = DBGBIT(TXERR) | DBGBIT(GENERAL);
 /*
  * HW models:
  *  E1000_DEV_ID_82540EM works with Windows, Linux, and OS X <= 10.8
- *  E1000_DEV_ID_82573L OK with windoze and Linux 2.6.22,
- *	appears to perform better than 82540EM, but breaks with Linux 2.6.18
  *  E1000_DEV_ID_82544GC_COPPER appears to work; not well tested
  *  E1000_DEV_ID_82545EM_COPPER works with Linux and OS X >= 10.6
  *  Others never tested
@@ -144,7 +142,6 @@ typedef struct E1000State_st {
 typedef struct E1000BaseClass {
     PCIDeviceClass parent_class;
     uint16_t phy_id2;
-    bool is_8257xx;
 } E1000BaseClass;
 
 #define TYPE_E1000_BASE "e1000-base"
@@ -271,15 +268,9 @@ static void
 set_interrupt_cause(E1000State *s, int index, uint32_t val)
 {
     PCIDevice *d = PCI_DEVICE(s);
-    E1000BaseClass *edc = E1000_DEVICE_GET_CLASS(d);
     uint32_t pending_ints;
     uint32_t mit_delay;
 
-    if (val && edc->is_8257xx) {
-        /* hack only for 8257xx models */
-        val |= E1000_ICR_INT_ASSERTED;
-    }
-
     s->mac_reg[ICR] = val;
 
     /*
@@ -1581,7 +1572,6 @@ typedef struct E1000Info {
     uint16_t   device_id;
     uint8_t    revision;
     uint16_t   phy_id2;
-    bool       is_8257xx;
 } E1000Info;
 
 static void e1000_class_init(ObjectClass *klass, void *data)
@@ -1598,7 +1588,6 @@ static void e1000_class_init(ObjectClass *klass, void *data)
     k->device_id = info->device_id;
     k->revision = info->revision;
     e->phy_id2 = info->phy_id2;
-    e->is_8257xx = info->is_8257xx;
     k->class_id = PCI_CLASS_NETWORK_ETHERNET;
     set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
     dc->desc = "Intel Gigabit Ethernet";
@@ -1634,13 +1623,6 @@ static const E1000Info e1000_devices[] = {
         .revision  = 0x03,
         .phy_id2   = E1000_PHY_ID2_8254xx_DEFAULT,
     },
-    {
-        .name      = "e1000-82573l",
-        .device_id = E1000_DEV_ID_82573L,
-        .revision  = 0x03,
-        .phy_id2   = E1000_PHY_ID2_82573x,
-        .is_8257xx = true,
-    },
 };
 
 static const TypeInfo e1000_default_info = {
diff --git a/tests/e1000-test.c b/tests/e1000-test.c
index 53c41f8..81f164d 100644
--- a/tests/e1000-test.c
+++ b/tests/e1000-test.c
@@ -33,7 +33,6 @@ static const char *models[] = {
     "e1000-82540em",
     "e1000-82544gc",
     "e1000-82545em",
-    "e1000-82573l",
 };
 
 int main(int argc, char **argv)
-- 
1.9.3

  parent reply	other threads:[~2014-06-02 13:33 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-02 13:33 [Qemu-devel] [PATCH v4 0/3] e1000: allow model/device_id selection on command line Gabriel L. Somlo
2014-06-02 13:33 ` [Qemu-devel] [PATCH v4 1/3] e1000: allow command-line selection of card model Gabriel L. Somlo
2014-06-02 16:17   ` Gabriel L. Somlo
2014-06-03  8:36     ` Stefan Hajnoczi
2014-06-02 13:33 ` [Qemu-devel] [PATCH v4 2/3] tests: e1000: test additional device IDs Gabriel L. Somlo
2014-06-02 13:33 ` Gabriel L. Somlo [this message]
2014-06-03  8:39 ` [Qemu-devel] [PATCH v4 0/3] e1000: allow model/device_id selection on command line Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1401716009-7005-4-git-send-email-somlo@cmu.edu \
    --to=gsomlo@gmail.com \
    --cc=afaerber@suse.de \
    --cc=agraf@suse.de \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.crosthwaite@xilinx.com \
    --cc=qemu-devel@nongnu.org \
    --cc=romain@dolbeau.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).