From: Alexander Graf <agraf@suse.de>
To: qemu-ppc@nongnu.org
Cc: Bharat Bhushan <Bharat.Bhushan@freescale.com>,
qemu-devel@nongnu.org, Bharat Bhushan <r65777@freescale.com>
Subject: [Qemu-devel] [PULL 060/118] PPC: e500: some pci related cleanup
Date: Wed, 4 Jun 2014 14:44:01 +0200 [thread overview]
Message-ID: <1401885899-16524-61-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1401885899-16524-1-git-send-email-agraf@suse.de>
From: Bharat Bhushan <r65777@freescale.com>
- Use PCI_NUM_PINS rather than hardcoding
- use "pin" wherever possible
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
hw/pci-host/ppce500.c | 14 +++++++-------
hw/ppc/e500.c | 12 +++++++-----
2 files changed, 14 insertions(+), 12 deletions(-)
diff --git a/hw/pci-host/ppce500.c b/hw/pci-host/ppce500.c
index c80b7cb..f672d5f 100644
--- a/hw/pci-host/ppce500.c
+++ b/hw/pci-host/ppce500.c
@@ -87,7 +87,7 @@ struct PPCE500PCIState {
struct pci_outbound pob[PPCE500_PCI_NR_POBS];
struct pci_inbound pib[PPCE500_PCI_NR_PIBS];
uint32_t gasket_time;
- qemu_irq irq[4];
+ qemu_irq irq[PCI_NUM_PINS];
uint32_t first_slot;
/* mmio maps */
MemoryRegion container;
@@ -252,26 +252,26 @@ static const MemoryRegionOps e500_pci_reg_ops = {
.endianness = DEVICE_BIG_ENDIAN,
};
-static int mpc85xx_pci_map_irq(PCIDevice *pci_dev, int irq_num)
+static int mpc85xx_pci_map_irq(PCIDevice *pci_dev, int pin)
{
int devno = pci_dev->devfn >> 3;
int ret;
- ret = ppce500_pci_map_irq_slot(devno, irq_num);
+ ret = ppce500_pci_map_irq_slot(devno, pin);
pci_debug("%s: devfn %x irq %d -> %d devno:%x\n", __func__,
- pci_dev->devfn, irq_num, ret, devno);
+ pci_dev->devfn, pin, ret, devno);
return ret;
}
-static void mpc85xx_pci_set_irq(void *opaque, int irq_num, int level)
+static void mpc85xx_pci_set_irq(void *opaque, int pin, int level)
{
qemu_irq *pic = opaque;
- pci_debug("%s: PCI irq %d, level:%d\n", __func__, irq_num, level);
+ pci_debug("%s: PCI irq %d, level:%d\n", __func__, pin , level);
- qemu_set_irq(pic[irq_num], level);
+ qemu_set_irq(pic[pin], level);
}
static const VMStateDescription vmstate_pci_outbound = {
diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
index 223bab9..3e238e6 100644
--- a/hw/ppc/e500.c
+++ b/hw/ppc/e500.c
@@ -613,7 +613,9 @@ void ppce500_init(MachineState *machine, PPCE500Params *params)
target_long initrd_size = 0;
target_ulong cur_base = 0;
int i;
- unsigned int pci_irq_nrs[4] = {1, 2, 3, 4};
+ /* irq num for pin INTA, INTB, INTC and INTD is 1, 2, 3 and
+ * 4 respectively */
+ unsigned int pci_irq_nrs[PCI_NUM_PINS] = {1, 2, 3, 4};
qemu_irq **irqs, *mpic;
DeviceState *dev;
CPUPPCState *firstenv = NULL;
@@ -715,10 +717,10 @@ void ppce500_init(MachineState *machine, PPCE500Params *params)
qdev_prop_set_uint32(dev, "first_slot", params->pci_first_slot);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
- sysbus_connect_irq(s, 0, mpic[pci_irq_nrs[0]]);
- sysbus_connect_irq(s, 1, mpic[pci_irq_nrs[1]]);
- sysbus_connect_irq(s, 2, mpic[pci_irq_nrs[2]]);
- sysbus_connect_irq(s, 3, mpic[pci_irq_nrs[3]]);
+ for (i = 0; i < PCI_NUM_PINS; i++) {
+ sysbus_connect_irq(s, i, mpic[pci_irq_nrs[i]]);
+ }
+
memory_region_add_subregion(ccsr_addr_space, MPC8544_PCI_REGS_OFFSET,
sysbus_mmio_get_region(s, 0));
--
1.8.1.4
next prev parent reply other threads:[~2014-06-04 12:45 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-04 12:43 [Qemu-devel] [PULL 00/118] ppc patch queue 2014-06-04 Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 001/118] target-ppc: Fix target_disas Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 002/118] monitor: QEMU Monitor Instruction Disassembly Incorrect for PowerPC LE Mode Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 003/118] Fix typo in eTSEC Ethernet controller Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 004/118] spapr_nvram: Correct max nvram size Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 005/118] target-ppc: extract register length calculation in gdbstub Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 006/118] target-ppc: gdbstub allow byte swapping for reading/writing registers Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 007/118] target-ppc: Create versionless CPU class per family if KVM Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 008/118] target-ppc: Move alias lookup after class lookup Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 009/118] target-ppc: Remove redundant POWER7 declarations Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 010/118] spapr-pci: remove io ports workaround Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 011/118] spapr_pci: Fix number of returned vectors in ibm, change-msi Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 012/118] target-ppc: Eliminate Magic Number MSR Masks Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 013/118] target-ppc: Remove PVR check from migration Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 014/118] mac99: Added FW_CFG_PPC_BUSFREQ to match CLOCKFREQ and TBFREQ already there Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 015/118] libdecnumber: Introduce libdecnumber Code Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 016/118] libdecnumber: Eliminate #include *Symbols.h Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 017/118] libdecnumber: Prepare libdecnumber for QEMU include structure Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 018/118] libdecnumber: Modify dconfig.h to Integrate with QEMU Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 019/118] libdecnumber: Change gstdint.h to stdint.h Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 020/118] libdecnumber: Eliminate redundant declarations Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 021/118] libdecnumber: Eliminate Unused Variable in decSetSubnormal Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 022/118] target-ppc: Enable Building of libdecnumber Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 023/118] libdecnumber: Introduce decNumberFrom[U]Int64 Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 024/118] libdecnumber: Introduce decNumberIntegralToInt64 Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 025/118] libdecnumber: Fix decNumberSetBCD Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 026/118] target-ppc: Define FPR Pointer Type for Helpers Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 027/118] target-ppc: Introduce Generator Macros for DFP Arithmetic Forms Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 028/118] target-ppc: Introduce Decoder Macros for DFP Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 029/118] target-ppc: Introduce DFP Helper Utilities Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 030/118] target-ppc: Introduce DFP Post Processor Utilities Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 031/118] target-ppc: Introduce DFP Add Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 032/118] target-ppc: Introduce DFP Subtract Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 033/118] target-ppc: Introduce DFP Multiply Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 034/118] target-ppc: Introduce DFP Divide Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 035/118] target-ppc: Introduce DFP Compares Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 036/118] target-ppc: Introduce DFP Test Data Class Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 037/118] target-ppc: Introduce DFP Test Data Group Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 038/118] target-ppc: Introduce DFP Test Exponent Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 039/118] target-ppc: Introduce DFP Test Significance Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 040/118] target-ppc: Introduce DFP Quantize Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 041/118] target-ppc: Introduce DFP Reround Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 042/118] target-ppc: Introduce DFP Round to Integer Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 043/118] target-ppc: Introduce DFP Convert to Long/Extended Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 044/118] target-ppc: Introduce Round to DFP Short/Long Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 045/118] target-ppc: Introduce DFP Convert to Fixed Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 046/118] " Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 047/118] target-ppc: Introduce DFP Decode DPD to BCD Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 048/118] target-ppc: Introduce DFP Encode BCD to DPD Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 049/118] target-ppc: Introduce DFP Extract Biased Exponent Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 050/118] target-ppc: Introduce DFP Insert " Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 051/118] target-ppc: Introduce DFP Shift Significand Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 052/118] spapr_pci: fix MSI limit Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 053/118] util: Add S-Box and InvS-Box Arrays to Common AES Utils Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 054/118] util: Add AES ShiftRows and InvShiftRows Tables Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 055/118] util: Add InvMixColumns Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 056/118] target-i386: Use Common ShiftRows and InvShiftRows Tables Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 057/118] target-arm: Use Common Tables in AES Instructions Alexander Graf
2014-06-04 12:43 ` [Qemu-devel] [PULL 058/118] target-ppc: Refactor " Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 059/118] KVM: PPC: Don't secretly add 1T segment feature to CPU Alexander Graf
2014-06-04 12:44 ` Alexander Graf [this message]
2014-06-04 12:44 ` [Qemu-devel] [PULL 061/118] PPC: e500: implement PCI INTx routing Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 062/118] PPC: Fix TCG chunks that don't free their temps Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 063/118] PPC: Fail on leaking temporaries Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 064/118] PPC: Make all e500 CPUs SVR aware Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 065/118] PPC: Add definitions for GIVORs Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 066/118] PPC: Fix SPR access control of L1CFG0 Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 067/118] PPC: Add L1CFG1 SPR emulation Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 068/118] PPC: Properly emulate L1CSR0 and L1CSR1 Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 069/118] PPC: Add dcbtls emulation Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 070/118] PPC: e500: Expose kernel load address in dt Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 071/118] PPC: Add u-boot firmware for e500 Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 072/118] PPC: e500: Move to u-boot as firmware Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 073/118] spapr: Add support for time base offset migration Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 074/118] spapr: Add ibm, chip-id property in device tree Alexander Graf
2014-06-04 12:44 ` [Qemu-devel] [PULL 075/118] macio: handle non-block ATAPI DMA transfers Alexander Graf
2014-06-20 14:29 ` Mark Cave-Ayland
2014-06-20 19:17 ` BALATON Zoltan
2014-06-20 19:27 ` Mark Cave-Ayland
2014-06-21 0:57 ` BALATON Zoltan
2014-06-23 16:31 ` Alexander Graf
2014-06-23 19:26 ` BALATON Zoltan
2014-06-23 22:41 ` Mark Cave-Ayland
2014-06-24 10:35 ` Kevin Wolf
2014-06-24 10:53 ` BALATON Zoltan
2014-06-24 11:02 ` Alexander Graf
2014-06-24 11:22 ` Kevin Wolf
2014-06-24 11:27 ` Alexander Graf
2014-06-24 12:07 ` Kevin Wolf
2014-06-24 12:10 ` Alexander Graf
2014-06-25 20:17 ` Mark Cave-Ayland
2014-06-25 21:48 ` BALATON Zoltan
2014-06-23 21:30 ` BALATON Zoltan
2014-06-05 19:10 ` [Qemu-devel] [PULL 00/118] ppc patch queue 2014-06-04 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401885899-16524-61-git-send-email-agraf@suse.de \
--to=agraf@suse.de \
--cc=Bharat.Bhushan@freescale.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=r65777@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).