From: Wenchao Xia <wenchaoqemu@gmail.com>
To: qemu-devel@nongnu.org
Cc: mdroth@linux.vnet.ibm.com, armbru@redhat.com,
Wenchao Xia <wenchaoqemu@gmail.com>,
lcapitulino@redhat.com
Subject: [Qemu-devel] [PATCH V6 06/29] monitor: add an implemention as qapi event emit method
Date: Thu, 5 Jun 2014 05:22:01 -0700 [thread overview]
Message-ID: <1401970944-18735-7-git-send-email-wenchaoqemu@gmail.com> (raw)
In-Reply-To: <1401970944-18735-1-git-send-email-wenchaoqemu@gmail.com>
Now monitor has been hooked on the new event mechanism, so the patches
later can convert event callers one by one. Most code are copied from
old monitor_protocol_* functions with some modification.
Note that two build time warnings will be raised after this patch. One is
caused by no caller of monitor_qapi_event_throttle(), the other one is
caused by QAPI_EVENT_MAX = 0. They will be fixed automatically after
full event conversion later.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
---
monitor.c | 128 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
trace-events | 4 ++
2 files changed, 131 insertions(+), 1 deletions(-)
diff --git a/monitor.c b/monitor.c
index 593679a..e122381 100644
--- a/monitor.c
+++ b/monitor.c
@@ -69,6 +69,8 @@
#include "qmp-commands.h"
#include "hmp.h"
#include "qemu/thread.h"
+#include "qapi/qmp-event.h"
+#include "qapi-event.h"
/* for pic/irq_info */
#if defined(TARGET_SPARC)
@@ -185,6 +187,14 @@ typedef struct MonitorEventState {
QObject *data; /* Event pending delayed dispatch */
} MonitorEventState;
+typedef struct MonitorQAPIEventState {
+ QAPIEvent event; /* Event being tracked */
+ int64_t rate; /* Period over which to throttle. 0 to disable */
+ int64_t last; /* Time at which event was last emitted */
+ QEMUTimer *timer; /* Timer for handling delayed events */
+ QObject *data; /* Event pending delayed dispatch */
+} MonitorQAPIEventState;
+
struct Monitor {
CharDriverState *chr;
int mux_out;
@@ -489,6 +499,122 @@ static const char *monitor_event_names[] = {
QEMU_BUILD_BUG_ON(ARRAY_SIZE(monitor_event_names) != QEVENT_MAX)
static MonitorEventState monitor_event_state[QEVENT_MAX];
+static MonitorQAPIEventState monitor_qapi_event_state[QAPI_EVENT_MAX];
+
+/*
+ * Emits the event to every monitor instance, @event is only used for trace
+ */
+static void monitor_qapi_event_emit(QAPIEvent event, QObject *data)
+{
+ Monitor *mon;
+
+ trace_monitor_qapi_event_emit(event, data);
+ QLIST_FOREACH(mon, &mon_list, entry) {
+ if (monitor_ctrl_mode(mon) && qmp_cmd_mode(mon)) {
+ monitor_json_emitter(mon, data);
+ }
+ }
+}
+
+/*
+ * Queue a new event for emission to Monitor instances,
+ * applying any rate limiting if required.
+ */
+static void
+monitor_qapi_event_queue(int event_kind, QDict *data, Error **errp)
+{
+ MonitorQAPIEventState *evstate;
+ assert(event_kind < QAPI_EVENT_MAX);
+ QAPIEvent event = (QAPIEvent)event_kind;
+ int64_t now = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
+
+ evstate = &(monitor_qapi_event_state[event]);
+ trace_monitor_qapi_event_queue(event,
+ data,
+ evstate->rate,
+ evstate->last,
+ now);
+
+ /* Rate limit of 0 indicates no throttling */
+ if (!evstate->rate) {
+ monitor_qapi_event_emit(event, QOBJECT(data));
+ evstate->last = now;
+ } else {
+ int64_t delta = now - evstate->last;
+ if (evstate->data ||
+ delta < evstate->rate) {
+ /* If there's an existing event pending, replace
+ * it with the new event, otherwise schedule a
+ * timer for delayed emission
+ */
+ if (evstate->data) {
+ qobject_decref(evstate->data);
+ } else {
+ int64_t then = evstate->last + evstate->rate;
+ timer_mod_ns(evstate->timer, then);
+ }
+ evstate->data = QOBJECT(data);
+ qobject_incref(evstate->data);
+ } else {
+ monitor_qapi_event_emit(event, QOBJECT(data));
+ evstate->last = now;
+ }
+ }
+}
+
+/*
+ * The callback invoked by QemuTimer when a delayed
+ * event is ready to be emitted
+ */
+static void monitor_qapi_event_handler(void *opaque)
+{
+ MonitorQAPIEventState *evstate = opaque;
+ int64_t now = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
+
+
+ trace_monitor_qapi_event_handler(evstate->event,
+ evstate->data,
+ evstate->last,
+ now);
+ if (evstate->data) {
+ monitor_qapi_event_emit(evstate->event, evstate->data);
+ qobject_decref(evstate->data);
+ evstate->data = NULL;
+ }
+ evstate->last = now;
+}
+
+/*
+ * @event: the event ID to be limited
+ * @rate: the rate limit in milliseconds
+ *
+ * Sets a rate limit on a particular event, so no
+ * more than 1 event will be emitted within @rate
+ * milliseconds
+ */
+static void monitor_qapi_event_throttle(QAPIEvent event, int64_t rate)
+{
+ MonitorQAPIEventState *evstate;
+ assert(event < QAPI_EVENT_MAX);
+
+ evstate = &(monitor_qapi_event_state[event]);
+
+ trace_monitor_qapi_event_throttle(event, rate);
+ evstate->event = event;
+ evstate->rate = rate * SCALE_MS;
+ evstate->last = 0;
+ evstate->data = NULL;
+ evstate->timer = timer_new(QEMU_CLOCK_REALTIME,
+ SCALE_MS,
+ monitor_qapi_event_handler,
+ evstate);
+}
+
+static void monitor_qapi_event_init(void)
+{
+ qmp_event_set_func_emit(monitor_qapi_event_queue);
+}
+
/*
* Emits the event to every monitor instance
@@ -507,7 +633,6 @@ monitor_protocol_event_emit(MonitorEvent event,
}
}
-
/*
* Queue a new event for emission to Monitor instances,
* applying any rate limiting if required.
@@ -5169,6 +5294,7 @@ void monitor_init(CharDriverState *chr, int flags)
if (is_first_init) {
monitor_protocol_event_init();
+ monitor_qapi_event_init();
sortcmdlist();
is_first_init = 0;
}
diff --git a/trace-events b/trace-events
index ffe6e62..f4b8dbb 100644
--- a/trace-events
+++ b/trace-events
@@ -932,6 +932,10 @@ monitor_protocol_event_handler(uint32_t event, void *data, uint64_t last, uint64
monitor_protocol_event_emit(uint32_t event, void *data) "event=%d data=%p"
monitor_protocol_event_queue(uint32_t event, void *data, uint64_t rate, uint64_t last, uint64_t now) "event=%d data=%p rate=%" PRId64 " last=%" PRId64 " now=%" PRId64
monitor_protocol_event_throttle(uint32_t event, uint64_t rate) "event=%d rate=%" PRId64
+monitor_qapi_event_emit(uint32_t event, void *data) "event=%d data=%p"
+monitor_qapi_event_queue(uint32_t event, void *data, uint64_t rate, uint64_t last, uint64_t now) "event=%d data=%p rate=%" PRId64 " last=%" PRId64 " now=%" PRId64
+monitor_qapi_event_handler(uint32_t event, void *data, uint64_t last, uint64_t now) "event=%d data=%p last=%" PRId64 " now=%" PRId64
+monitor_qapi_event_throttle(uint32_t event, uint64_t rate) "event=%d rate=%" PRId64
# hw/net/opencores_eth.c
open_eth_mii_write(unsigned idx, uint16_t v) "MII[%02x] <- %04x"
--
1.7.1
next prev parent reply other threads:[~2014-06-05 12:24 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-05 12:21 [Qemu-devel] [PATCH V6 00/29] add direct support of event in qapi schema Wenchao Xia
2014-06-05 12:21 ` [Qemu-devel] [PATCH V6 01/29] os-posix: include sys/time.h Wenchao Xia
2014-06-05 12:21 ` [Qemu-devel] [PATCH V6 02/29] qapi: add event helper functions Wenchao Xia
2014-06-05 12:21 ` [Qemu-devel] [PATCH V6 03/29] qapi script: add event support Wenchao Xia
2014-06-13 16:47 ` Eric Blake
2014-06-13 21:28 ` Eric Blake
2014-06-18 3:33 ` Eric Blake
2014-06-18 6:06 ` Paolo Bonzini
2014-06-18 22:45 ` Wenchao Xia
2014-06-18 3:50 ` Eric Blake
2014-06-05 12:21 ` [Qemu-devel] [PATCH V6 04/29] test: add test cases for qapi event Wenchao Xia
2014-06-13 17:05 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 05/29] qapi: adjust existing defines Wenchao Xia
2014-06-13 17:32 ` Eric Blake
2014-06-05 12:22 ` Wenchao Xia [this message]
2014-06-13 19:04 ` [Qemu-devel] [PATCH V6 06/29] monitor: add an implemention as qapi event emit method Eric Blake
2014-06-15 0:27 ` Wenchao Xia
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 07/29] qapi: add new schema file qapi-event.json Wenchao Xia
2014-06-13 19:25 ` Eric Blake
2014-06-13 19:45 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 08/29] qapi event: convert SHUTDOWN Wenchao Xia
2014-06-13 19:57 ` Eric Blake
2014-06-15 0:32 ` Wenchao Xia
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 09/29] qapi event: convert POWERDOWN Wenchao Xia
2014-06-13 20:02 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 10/29] qapi event: convert RESET Wenchao Xia
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 11/29] qapi event: convert STOP Wenchao Xia
2014-06-13 20:29 ` Eric Blake
2014-06-17 9:17 ` Paolo Bonzini
2014-06-17 13:18 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 12/29] qapi event: convert RESUME Wenchao Xia
2014-06-13 20:33 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 13/29] qapi event: convert SUSPEND Wenchao Xia
2014-06-13 20:40 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 14/29] qapi event: convert SUSPEND_DISK Wenchao Xia
2014-06-13 20:42 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 15/29] qapi event: convert WAKEUP Wenchao Xia
2014-06-13 20:57 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 16/29] qapi event: convert RTC_CHANGE Wenchao Xia
2014-06-13 21:27 ` Eric Blake
2014-06-15 0:38 ` Wenchao Xia
2014-06-15 14:01 ` Paolo Bonzini
2014-06-15 14:00 ` Paolo Bonzini
2014-06-17 9:21 ` Paolo Bonzini
2014-06-17 13:19 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 17/29] qapi event: convert WATCHDOG Wenchao Xia
2014-06-13 21:47 ` Eric Blake
2014-06-13 22:05 ` Eric Blake
2014-06-15 0:45 ` Wenchao Xia
2014-06-17 9:23 ` Paolo Bonzini
2014-06-17 13:21 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 18/29] qapi event: convert DEVICE_DELETED Wenchao Xia
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 19/29] qapi event: convert DEVICE_TRAY_MOVED Wenchao Xia
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 20/29] qapi event: convert BLOCK_IO_ERROR and BLOCK_JOB_ERROR Wenchao Xia
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 21/29] qapi event: convert BLOCK_IMAGE_CORRUPTED Wenchao Xia
2014-06-16 22:53 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 22/29] qapi event: convert other BLOCK_JOB events Wenchao Xia
2014-06-16 22:57 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 23/29] qapi event: convert NIC_RX_FILTER_CHANGED Wenchao Xia
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 24/29] qapi event: convert VNC events Wenchao Xia
2014-06-16 23:01 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 25/29] qapi event: convert SPICE events Wenchao Xia
2014-06-16 23:05 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 26/29] qapi event: convert BALLOON_CHANGE Wenchao Xia
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 27/29] qapi event: convert GUEST_PANICKED Wenchao Xia
2014-06-16 14:08 ` Eric Blake
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 28/29] qapi event: convert QUORUM events Wenchao Xia
2014-06-05 12:22 ` [Qemu-devel] [PATCH V6 29/29] qapi event: clean up Wenchao Xia
2014-06-16 14:09 ` Eric Blake
2014-06-10 5:48 ` [Qemu-devel] [PATCH V6 00/29] add direct support of event in qapi schema Paolo Bonzini
2014-06-15 0:52 ` Wenchao Xia
2014-06-17 10:57 ` Paolo Bonzini
2014-06-17 16:05 ` Eric Blake
2014-06-17 16:30 ` Paolo Bonzini
2014-06-17 22:10 ` Wenchao Xia
2014-06-18 4:00 ` Eric Blake
2014-06-18 6:07 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401970944-18735-7-git-send-email-wenchaoqemu@gmail.com \
--to=wenchaoqemu@gmail.com \
--cc=armbru@redhat.com \
--cc=lcapitulino@redhat.com \
--cc=mdroth@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).