From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Stefan Weil <sw@weilnetz.de>, qemu-stable@nongnu.org
Subject: [Qemu-devel] [PULL 01/33] cputlb: Fix regression with TCG interpreter (bug 1310324)
Date: Thu, 5 Jun 2014 16:21:51 +0200 [thread overview]
Message-ID: <1401978143-11896-2-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1401978143-11896-1-git-send-email-pbonzini@redhat.com>
From: Stefan Weil <sw@weilnetz.de>
Commit 0f842f8a246f2b5b51a11c13f933bf7a90ae8e96 replaced GETPC_EXT() which
was derived from GETPC() by GETRA_EXT() without fixing cputlb.c. A later
patch replaced GETRA_EXT() by GETRA() in exec/softmmu_template.h which
is included in cputlb.c.
The TCG interpreter failed because the values returned by GETRA() were no
longer explicitly set to 0. The redefinition of GETRA() introduced here
fixes this.
In addition, GETPC_ADJ which is also used in exec/softmmu_template.h is
set to 0. Both changes reduce the compiled code size for cputlb.c by more
than 100 bytes, so the normal TCG without interpreter also profits from
the reduced code size and slightly faster code.
Cc: qemu-stable@nongnu.org
Reported-by: Giovanni Mascellani <gio@debian.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
cputlb.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/cputlb.c b/cputlb.c
index 7bd3573..214c945 100644
--- a/cputlb.c
+++ b/cputlb.c
@@ -331,8 +331,10 @@ tb_page_addr_t get_page_addr_code(CPUArchState *env1, target_ulong addr)
}
#define MMUSUFFIX _cmmu
-#undef GETPC
-#define GETPC() ((uintptr_t)0)
+#undef GETPC_ADJ
+#define GETPC_ADJ 0
+#undef GETRA
+#define GETRA() ((uintptr_t)0)
#define SOFTMMU_CODE_ACCESS
#define SHIFT 0
--
1.8.3.1
next prev parent reply other threads:[~2014-06-05 14:22 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-05 14:21 [Qemu-devel] [PULL 00/33] softmmu cleanups and target-i386 paging fixes Paolo Bonzini
2014-06-05 14:21 ` Paolo Bonzini [this message]
2014-06-05 14:21 ` [Qemu-devel] [PULL 02/33] nseries: clean up coding style Paolo Bonzini
2014-06-05 14:21 ` [Qemu-devel] [PULL 03/33] hw: use ld_p/st_p instead of ld_raw/st_raw Paolo Bonzini
2014-06-05 14:21 ` [Qemu-devel] [PULL 04/33] softmmu: start introducing SOFTMMU_CODE_ACCESS in softmmu_header.h Paolo Bonzini
2014-06-05 14:21 ` [Qemu-devel] [PULL 05/33] softmmu: move MMUSUFFIX under SOFTMMU_CODE_ACCESS Paolo Bonzini
2014-06-05 14:21 ` [Qemu-devel] [PULL 06/33] softmmu: move definition of CPU_MMU_INDEX to inclusion site, drop ACCESS_TYPE Paolo Bonzini
2014-06-05 14:21 ` [Qemu-devel] [PULL 07/33] softmmu: make do_unaligned_access a method of CPU Paolo Bonzini
2014-06-05 14:21 ` [Qemu-devel] [PULL 08/33] softmmu: move ALIGNED_ONLY to cpu.h Paolo Bonzini
2014-06-05 14:21 ` [Qemu-devel] [PULL 09/33] softmmu: commonize helper definitions Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 10/33] softmmu: move softmmu_template.h out of include/ Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 11/33] target-arm: move arm_*_code to a separate file Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 12/33] softmmu: introduce cpu_ldst.h Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 13/33] softmmu: move all load/store functions to cpu_ldst.h Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 14/33] target-i386: rename KSMAP to KNOSMAP Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 15/33] target-i386: move check_io helpers to seg_helper.c Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 16/33] target-i386: fix kernel accesses with SMAP and CPL = 3 Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 17/33] target-i386: simplify SMAP handling in MMU_KSMAP_IDX Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 18/33] target-i386: fix coding standards in x86_cpu_handle_mmu_fault Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 19/33] target-i386: commonize checks for 2MB and 4KB pages Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 20/33] target-i386: commonize checks for 4MB " Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 21/33] target-i386: commonize checks for PAE and non-PAE Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 22/33] target-i386: tweak handling of PG_NX_MASK Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 23/33] target-i386: introduce do_check_protect label Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 24/33] target-i386: introduce support for 1 GB pages Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 25/33] target-i386: set correct error code for reserved bit access Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 26/33] target-i386: test reserved PS bit on PML4Es Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 27/33] target-i386: raise page fault for reserved physical address bits Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 28/33] target-i386: simplify pte/vaddr calculation Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 29/33] target-i386: unify reserved bits and NX bit check Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 30/33] target-i386: raise page fault for reserved bits in large pages Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 31/33] target-i386: support long addresses for 4MB pages (PSE-36) Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 32/33] target-i386: fix protection bits in the TLB for SMEP Paolo Bonzini
2014-06-05 14:22 ` [Qemu-devel] [PULL 33/33] target-i386: cleanup x86_cpu_get_phys_page_debug Paolo Bonzini
2014-06-05 20:50 ` [Qemu-devel] [PULL 00/33] softmmu cleanups and target-i386 paging fixes Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401978143-11896-2-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-stable@nongnu.org \
--cc=sw@weilnetz.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).