* [Qemu-devel] [PULL v2 8/8] rules.mak: Rewrite unnest-vars
2014-06-10 11:08 [Qemu-devel] [PULL v2 0/8] build system and libcacard changes for 2014-06-10 Paolo Bonzini
@ 2014-06-10 11:08 ` Paolo Bonzini
2014-06-10 16:15 ` [Qemu-devel] [PULL v2 0/8] build system and libcacard changes for 2014-06-10 Peter Maydell
1 sibling, 0 replies; 3+ messages in thread
From: Paolo Bonzini @ 2014-06-10 11:08 UTC (permalink / raw)
To: qemu-devel; +Cc: Fam Zheng
From: Fam Zheng <famz@redhat.com>
The macro unnest-vars is the most important, complicated but hard to
track magic in QEMU's build system.
Rewrite it in a (hopefully) clearer way, with more comments, to make it
easier to understand and maintain.
Remove DSO_CFLAGS and module-objs-m that are not used.
A bonus fix of this version is, per object variables are properly
protected in save-objs and load-objs, before including sub-dir
Makefile.objs, just as nested variables are. So the occasional same
object name from different directory levels won't step on each other's
foot.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
rules.mak | 237 +++++++++++++++++++++++++++++++++++++++++---------------------
1 file changed, 158 insertions(+), 79 deletions(-)
diff --git a/rules.mak b/rules.mak
index b12d312..5598d3f 100644
--- a/rules.mak
+++ b/rules.mak
@@ -22,9 +22,7 @@ QEMU_DGFLAGS += -MMD -MP -MT $@ -MF $(*D)/$(*F).d
# Same as -I$(SRC_PATH) -I., but for the nested source/object directories
QEMU_INCLUDES += -I$(<D) -I$(@D)
-maybe-add = $(filter-out $1, $2) $1
-extract-libs = $(strip $(sort $(foreach o,$1,$($o-libs))) \
- $(foreach o,$(call expand-objs,$1),$($o-libs)))
+extract-libs = $(strip $(sort $(foreach o,$1,$($o-libs))))
expand-objs = $(strip $(sort $(filter %.o,$1)) \
$(foreach o,$(filter %.mo,$1),$($o-objs)) \
$(filter-out %.o %.mo,$1))
@@ -39,9 +37,8 @@ expand-objs = $(strip $(sort $(filter %.o,$1)) \
LINKPROG = $(or $(CXX),$(CC))
ifeq ($(LIBTOOL),)
-LINK = $(call quiet-command,$(LINKPROG) $(QEMU_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ \
- $(call expand-objs,$1) $(version-obj-y) \
- $(call extract-libs,$1) $(LIBS)," LINK $(TARGET_DIR)$@")
+LINK = $(call quiet-command, $(LINKPROG) $(QEMU_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+ $1 $(version-obj-y) $(call extract-libs,$1) $(LIBS)," LINK $(TARGET_DIR)$@")
else
LIBTOOL += $(if $(V),,--quiet)
%.lo: %.c
@@ -53,8 +50,7 @@ LIBTOOL += $(if $(V),,--quiet)
LINK = $(call quiet-command,\
$(if $(filter %.lo %.la,$1),$(LIBTOOL) --mode=link --tag=CC \
- )$(LINKPROG) $(QEMU_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ \
- $(call expand-objs,$1) \
+ )$(LINKPROG) $(QEMU_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ $1 \
$(if $(filter %.lo %.la,$1),$(version-lobj-y),$(version-obj-y)) \
$(if $(filter %.lo %.la,$1),$(LIBTOOLFLAGS)) \
$(call extract-libs,$(1:.lo=.o)) $(LIBS),$(if $(filter %.lo %.la,$1),"lt LINK ", " LINK ")"$(TARGET_DIR)$@")
@@ -78,9 +74,9 @@ endif
%.o: %.dtrace
$(call quiet-command,dtrace -o $@ -G -s $<, " GEN $(TARGET_DIR)$@")
-DSO_CFLAGS := -fPIC -DBUILD_DSO
+%$(DSOSUF): CFLAGS += -fPIC -DBUILD_DSO
%$(DSOSUF): LDFLAGS += $(LDFLAGS_SHARED)
-%$(DSOSUF): %.mo libqemustub.a
+%$(DSOSUF):
$(call LINK,$^)
@# Copy to build root so modules can be loaded when program started without install
$(if $(findstring /,$@),$(call quiet-command,cp $@ $(subst /,-,$@), " CP $(subst /,-,$@)"))
@@ -161,82 +157,165 @@ clean: clean-timestamp
# will delete the target of a rule if commands exit with a nonzero exit status
.DELETE_ON_ERROR:
-# magic to descend into other directories
-
-define push-var
-$(eval save-$2-$1 = $(value $1))
-$(eval $1 :=)
-endef
-
-define pop-var
-$(eval subdir-$2-$1 := $(if $(filter $2,$(save-$2-$1)),$(addprefix $2,$($1))))
-$(eval $1 = $(value save-$2-$1) $$(subdir-$2-$1))
-$(eval save-$2-$1 :=)
-endef
-
-define fix-obj-vars
-$(if $2, $(foreach v,$($1), \
- $(if $($v-cflags), \
- $(eval $2/$v-cflags := $($v-cflags)) \
- $(eval $v-cflags := )) \
- $(if $($v-libs), \
- $(eval $2/$v-libs := $($v-libs)) \
- $(eval $v-libs := )) \
- $(if $($v-objs), \
- $(eval $2/$v-objs := $(addprefix $2/,$($v-objs))) \
- $(eval $v-objs := ))))
+# save-vars
+# Usage: $(call save-vars, vars)
+# Save each variable $v in $vars as save-vars-$v, save their object's
+# variables, then clear $v.
+define save-vars
+ $(foreach v,$1,
+ $(eval save-vars-$v := $(value $v))
+ $(foreach o,$($v),
+ $(foreach k,cflags libs objs,
+ $(if $($o-$k),
+ $(eval save-vars-$o-$k := $($o-$k))
+ $(eval $o-$k := ))))
+ $(eval $v := ))
endef
-define unnest-dir
-$(foreach var,$(nested-vars),$(call push-var,$(var),$1/))
-$(eval obj-parent-$1 := $(obj))
-$(eval obj := $(if $(obj),$(obj)/$1,$1))
-$(eval include $(SRC_PATH)/$1/Makefile.objs)
-$(foreach v,$(nested-vars),$(call fix-obj-vars,$v,$(obj)))
-$(eval obj := $(obj-parent-$1))
-$(eval obj-parent-$1 := )
-$(foreach var,$(nested-vars),$(call pop-var,$(var),$1/))
+# load-vars
+# Usage: $(call load-vars, vars, add_var)
+# Load the saved value for each variable in @vars, and the per object
+# variables.
+# Append @add_var's current value to the loaded value.
+define load-vars
+ $(eval $2-new-value := $(value $2))
+ $(foreach v,$1,
+ $(eval $v := $(value save-vars-$v))
+ $(foreach o,$($v),
+ $(foreach k,cflags libs objs,
+ $(if $(save-vars-$o-$k),
+ $(eval $o-$k := $(save-vars-$o-$k))
+ $(eval save-vars-$o-$k := ))))
+ $(eval save-vars-$v := ))
+ $(eval $2 := $(value $2) $($2-new-value))
endef
-define unnest-vars-1
-$(eval nested-dirs := $(filter-out \
- $(old-nested-dirs), \
- $(sort $(foreach var,$(nested-vars), $(filter %/, $($(var)))))))
-$(if $(nested-dirs),
- $(foreach dir,$(nested-dirs),$(call unnest-dir,$(patsubst %/,%,$(dir))))
- $(eval old-nested-dirs := $(old-nested-dirs) $(nested-dirs))
- $(call unnest-vars-1))
+# fix-paths
+# Usage: $(call fix-paths, obj_path, src_path, vars)
+# Add prefix @obj_path to all objects in @vars, and add prefix @src_path to all
+# directories in @vars.
+define fix-paths
+ $(foreach v,$3,
+ $(foreach o,$($v),
+ $(if $($o-libs),
+ $(eval $1$o-libs := $($o-libs)))
+ $(if $($o-cflags),
+ $(eval $1$o-cflags := $($o-cflags)))
+ $(if $($o-objs),
+ $(eval $1$o-objs := $(addprefix $1,$($o-objs)))))
+ $(eval $v := $(addprefix $1,$(filter-out %/,$($v))) \
+ $(addprefix $2,$(filter %/,$($v)))))
endef
-define process-modules
-$(foreach o,$(filter %.o,$($1)),
- $(eval $(patsubst %.o,%.mo,$o): $o) \
- $(eval $(patsubst %.o,%.mo,$o)-objs := $o))
-$(foreach o,$(filter-out $(modules-m), $(patsubst %.o,%.mo,$($1))), \
- $(eval $o-objs += module-common.o)
- $(eval $o: $($o-objs))
- $(eval modules-objs-m += $($o-objs))
- $(eval modules-m += $o)
- $(eval $o:; $$(call quiet-command,touch $$@," GEN $$(TARGET_DIR)$$@"))
- $(if $(CONFIG_MODULES),$(eval modules: $(patsubst %.mo,%$(DSOSUF),$o)))) \
-$(eval modules-objs-m := $(sort $(modules-objs-m)))
-$(foreach o,$(modules-objs-m), \
- $(if $(CONFIG_MODULES),$(eval $o-cflags := $(call maybe-add, $(DSO_CFLAGS), $($o-cflags)))))
-$(eval $(patsubst %-m,%-$(call lnot,$(CONFIG_MODULES)),$1) += $($1))
+# unnest-var-recursive
+# Usage: $(call unnest-var-recursive, obj_prefix, vars, var)
+#
+# Unnest @var by including subdir Makefile.objs, while protect others in @vars
+# unchanged.
+#
+# @obj_prefix is the starting point of object path prefix.
+#
+define unnest-var-recursive
+ $(eval dirs := $(sort $(filter %/,$($3))))
+ $(eval $3 := $(filter-out %/,$($3)))
+ $(foreach d,$(dirs:%/=%),
+ $(call save-vars,$2)
+ $(eval obj := $(if $1,$1/)$d)
+ $(eval -include $(SRC_PATH)/$d/Makefile.objs)
+ $(call fix-paths,$(if $1,$1/)$d/,$d/,$2)
+ $(call load-vars,$2,$3)
+ $(call unnest-var-recursive,$1,$2,$3))
endef
+# unnest-vars
+# Usage: $(call unnest-vars, obj_prefix, vars)
+#
+# @obj_prefix: object path prefix, can be empty, or '..', etc. Don't include
+# ending '/'.
+#
+# @vars: the list of variable names to unnest.
+#
+# This macro will scan subdirectories's Makefile.objs, include them, to build
+# up each variable listed in @vars.
+#
+# Per object and per module cflags and libs are saved with relative path fixed
+# as well, those variables include -libs, -cflags and -objs. Items in -objs are
+# also fixed to relative path against SRC_PATH plus the prefix @obj_prefix.
+#
+# All nested variables postfixed by -m in names are treated as DSO variables,
+# and will be built as modules, if enabled.
+#
+# A simple example of the unnest:
+#
+# obj_prefix = ..
+# vars = hot cold
+# hot = fire.o sun.o season/
+# cold = snow.o water/ season/
+#
+# Unnest through a faked source directory structure:
+#
+# SRC_PATH
+# ├── water
+# │ └── Makefile.objs──────────────────┐
+# │ │ hot += steam.o │
+# │ │ cold += ice.mo │
+# │ │ ice.mo-libs := -licemaker │
+# │ │ ice.mo-objs := ice1.o ice2.o │
+# │ └──────────────────────────────┘
+# │
+# └── season
+# └── Makefile.objs──────┐
+# │ hot += summer.o │
+# │ cold += winter.o │
+# └──────────────────┘
+#
+# In the end, the result will be:
+#
+# hot = ../fire.o ../sun.o ../season/summer.o
+# cold = ../snow.o ../water/ice.mo ../season/winter.o
+# ../water/ice.mo-libs = -licemaker
+# ../water/ice.mo-objs = ../water/ice1.o ../water/ice2.o
+#
+# Note that 'hot' didn't include 'season/' in the input, so 'summer.o' is not
+# included.
+#
define unnest-vars
-$(eval obj := $1)
-$(eval nested-vars := $2)
-$(foreach v,$(nested-vars),$(call fix-obj-vars,$v,$(obj)))
-$(eval old-nested-dirs := )
-$(call unnest-vars-1)
-$(if $1,$(foreach v,$(nested-vars),$(eval \
- $v := $(addprefix $1/,$($v)))))
-$(foreach var,$(nested-vars),$(eval $(var) := $(filter-out %/, $($(var)))))
-$(shell mkdir -p $(sort $(foreach var,$(nested-vars),$(dir $($(var))))))
-$(foreach var,$(nested-vars), $(eval \
- -include $(addsuffix *.d, $(sort $(dir $($(var)))))))
-$(foreach v,$(filter %-m,$(nested-vars)), \
- $(call process-modules,$v))
+ # In the case of target build (i.e. $1 == ..), fix path for top level
+ # Makefile.objs objects
+ $(if $1,$(call fix-paths,$1/,,$2))
+
+ # Descend and include every subdir Makefile.objs
+ $(foreach v, $2, $(call unnest-var-recursive,$1,$2,$v))
+
+ $(foreach v,$(filter %-m,$2),
+ # All .o found in *-m variables are single object modules, create .mo
+ # for them
+ $(foreach o,$(filter %.o,$($v)),
+ $(eval $(o:%.o=%.mo)-objs := $o))
+ # Now unify .o in -m variable to .mo
+ $(eval $v := $($v:%.o=%.mo))
+ $(eval modules-m += $($v))
+
+ # For module build, build shared libraries during "make modules"
+ # For non-module build, add -m to -y
+ $(if $(CONFIG_MODULES),
+ $(eval modules: $($v:%.mo=%$(DSOSUF))),
+ $(eval $(patsubst %-m,%-y,$v) += $(call expand-objs, $($v)))))
+
+ # Post-process all the unnested vars
+ $(foreach v,$2,
+ $(foreach o, $(filter %.mo,$($v)),
+ # Find all the .mo objects in variables and add dependency rules
+ # according to .mo-objs. Report error if not set
+ $(if $($o-objs),
+ $(eval $(o:%.mo=%$(DSOSUF)): module-common.o $($o-objs)),
+ $(error $o added in $v but $o-objs is not set))
+ # Pass the .mo-cflags and .mo-libs along to member objects
+ $(foreach p,$($o-objs),
+ $(if $($o-cflags), $(eval $p-cflags += $($o-cflags)))
+ $(if $($o-libs), $(eval $p-libs += $($o-libs)))))
+ $(shell mkdir -p ./ $(sort $(dir $($v))))
+ # Include all the .d files
+ $(eval -include $(addsuffix *.d, $(sort $(dir $($v)))))
+ $(eval $v := $(filter-out %/,$($v))))
endef
--
1.8.3.1
^ permalink raw reply related [flat|nested] 3+ messages in thread