From: Fabian Aggeler <aggelerf@ethz.ch>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, peter.crosthwaite@xilinx.com,
greg.bellows@linaro.org, serge.fdrv@gmail.com,
edgar.iglesias@gmail.com, christoffer.dall@linaro.org
Subject: [Qemu-devel] [PATCH v3 23/32] target-arm: add TTBR0_EL3 and make TTBR0/1 banked
Date: Wed, 11 Jun 2014 01:55:05 +0200 [thread overview]
Message-ID: <1402444514-19658-24-git-send-email-aggelerf@ethz.ch> (raw)
In-Reply-To: <1402444514-19658-1-git-send-email-aggelerf@ethz.ch>
Add TTBR0 and maps secure/non-secure instance of ttbr0 and ttbr1
accordingly (translation table base register).
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
---
target-arm/cpu.h | 21 +++++++++++++++++++--
target-arm/helper.c | 45 +++++++++++++++++++++++++++++++++++----------
2 files changed, 54 insertions(+), 12 deletions(-)
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 6d3deb1..6890e82 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -203,8 +203,25 @@ typedef struct CPUARMState {
uint32_t c1_scr; /* secure config register. */
uint32_t c1_sder; /* Secure debug enable register. */
uint32_t c1_nsacr; /* Non-secure access control register. */
- uint64_t ttbr0_el1; /* MMU translation table base 0. */
- uint64_t ttbr1_el1; /* MMU translation table base 1. */
+ union { /* MMU translation table base 0. */
+ struct {
+ uint64_t ttbr0_ns;
+ uint64_t ttbr0_s;
+ };
+ struct {
+ uint64_t ttbr0_el1;
+ uint64_t ttbr0_el3;
+ };
+ };
+ union { /* MMU translation table base 1. */
+ struct {
+ uint64_t ttbr1_ns;
+ uint64_t ttbr1_s;
+ };
+ struct {
+ uint64_t ttbr1_el1;
+ };
+ };
uint64_t c2_control; /* MMU translation table base control. */
uint32_t c2_mask; /* MMU translation table base selection mask. */
uint32_t c2_base_mask; /* MMU translation table base 0 mask. */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 69d9612..22609ed 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1498,12 +1498,14 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, },
{ .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
- .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
- .writefn = vmsa_ttbr_write, .resetvalue = 0 },
+ .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+ offsetof(CPUARMState, cp15.ttbr0_el1) } },
{ .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
- .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
- .writefn = vmsa_ttbr_write, .resetvalue = 0 },
+ .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+ offsetof(CPUARMState, cp15.ttbr1_el1) } },
{ .name = "TCR_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
.access = PL1_RW, .writefn = vmsa_tcr_el1_write,
@@ -1744,11 +1746,13 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.par_el1), .resetvalue = 0 },
{ .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0,
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
- .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+ offsetof(CPUARMState, cp15.ttbr0_ns) },
.writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
{ .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
- .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+ offsetof(CPUARMState, cp15.ttbr1_ns) },
.writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
REGINFO_SENTINEL
};
@@ -2270,6 +2274,10 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
.opc0 = 3, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0,
.access = PL3_RW, .raw_writefn = raw_write, .writefn = sctlr_write,
.fieldoffset = offsetof(CPUARMState, cp15.sctlr_el3) },
+ { .name = "TTBR0_EL3", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 6, .opc2 = 0,
+ .access = PL3_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el3) },
{ .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
.opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1,
@@ -3966,10 +3974,14 @@ static uint32_t get_level1_table_address(CPUARMState *env, uint32_t address)
{
uint32_t table;
+ /* We only get here if EL1 is running in Aarch32. If EL3 is running in
+ * Aarch32 there is a secure and non-secure instance of the translation
+ * table registers.
+ */
if (address & env->cp15.c2_mask)
- table = env->cp15.ttbr1_el1 & 0xffffc000;
+ table = A32_BANKED_CURRENT_REG_GET(env, ttbr1) & 0xffffc000;
else
- table = env->cp15.ttbr0_el1 & env->cp15.c2_base_mask;
+ table = A32_BANKED_CURRENT_REG_GET(env, ttbr0) & env->cp15.c2_base_mask;
table |= (address >> 18) & 0x3ffc;
return table;
@@ -4215,6 +4227,7 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
int32_t granule_sz = 9;
int32_t va_size = 32;
int32_t tbi = 0;
+ uint32_t cur_el = arm_current_pl(env);
if (arm_el_is_aa64(env, 1)) {
va_size = 64;
@@ -4266,7 +4279,19 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
* we will always flush the TLB any time the ASID is changed).
*/
if (ttbr_select == 0) {
- ttbr = env->cp15.ttbr0_el1;
+ if (arm_el_is_aa64(env, 3)) {
+ switch (cur_el) {
+ case 3:
+ ttbr = env->cp15.ttbr0_el3;
+ break;
+ case 1:
+ case 0:
+ default:
+ ttbr = env->cp15.ttbr0_el1;
+ }
+ } else {
+ ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr0);
+ }
epd = extract32(env->cp15.c2_control, 7, 1);
tsz = t0sz;
@@ -4278,7 +4303,7 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
granule_sz = 11;
}
} else {
- ttbr = env->cp15.ttbr1_el1;
+ ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr1);
epd = extract32(env->cp15.c2_control, 23, 1);
tsz = t1sz;
--
1.8.3.2
next prev parent reply other threads:[~2014-06-10 23:55 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-10 23:54 [Qemu-devel] [PATCH v3 00/32] target-arm: add Security Extensions for CPUs Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 01/32] target-arm: add cpu feature EL3 to CPUs with Security Extensions Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 02/32] target-arm: move Aarch32 SCR into security reglist Fabian Aggeler
2014-06-12 21:55 ` Greg Bellows
2014-06-17 7:22 ` Aggeler Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 03/32] target-arm: increase arrays of registers R13 & R14 Fabian Aggeler
2014-06-17 8:57 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 04/32] target-arm: add arm_is_secure() function Fabian Aggeler
2014-06-11 12:17 ` Sergey Fedorov
2014-06-12 16:26 ` Greg Bellows
2014-06-12 17:26 ` Sergey Fedorov
2014-06-12 18:35 ` Greg Bellows
2014-06-12 19:09 ` Sergey Fedorov
2014-06-17 5:51 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 05/32] target-arm: reject switching to monitor mode Fabian Aggeler
2014-06-12 21:55 ` Greg Bellows
2014-06-24 12:19 ` Aggeler Fabian
2014-06-24 13:43 ` Greg Bellows
2014-06-17 5:43 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 06/32] target-arm: make arm_current_pl() return PL3 Fabian Aggeler
2014-06-17 5:40 ` Edgar E. Iglesias
2014-06-17 7:12 ` Aggeler Fabian
2014-06-17 7:07 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 07/32] target-arm: add non-secure Translation Block flag Fabian Aggeler
2014-06-17 9:15 ` Edgar E. Iglesias
2014-06-17 10:07 ` Sergey Fedorov
2014-06-19 5:30 ` Edgar E. Iglesias
2014-06-25 4:15 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 08/32] target-arm: A32: Emulate the SMC instruction Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 09/32] target-arm: extend Aarch32 async excp masking Fabian Aggeler
2014-06-17 7:48 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 10/32] target-arm: extend Aarch64 SCR.{FIQ|IRQ} handling Fabian Aggeler
2014-06-12 21:55 ` Greg Bellows
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 11/32] target-arm: add async excp target_el&mode function Fabian Aggeler
2014-06-12 21:56 ` Greg Bellows
2014-06-17 7:29 ` Aggeler Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 12/32] target-arm: use dedicated target_el function Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 13/32] target-arm: implement IRQ/FIQ routing to Monitor mode Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 14/32] target-arm: Respect SCR.FW, SCR.AW and SCTLR.NMFI Fabian Aggeler
2014-06-12 22:43 ` Greg Bellows
2014-06-17 7:36 ` Aggeler Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 15/32] target-arm: add NSACR register Fabian Aggeler
2014-06-13 18:27 ` Greg Bellows
2014-06-17 7:41 ` Aggeler Fabian
2014-06-24 15:37 ` Greg Bellows
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 16/32] target-arm: add SDER definition Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 17/32] target-arm: add MVBAR support Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 18/32] target-arm: add macros to access banked registers Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 19/32] target-arm: insert Aarch32 cpregs twice into hashtable Fabian Aggeler
2014-06-12 19:49 ` Sergey Fedorov
2014-06-25 5:20 ` Edgar E. Iglesias
2014-06-25 13:50 ` Greg Bellows
2014-06-26 3:56 ` Edgar E. Iglesias
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 20/32] target-arm: arrayfying fieldoffset for banking Fabian Aggeler
2014-06-13 20:18 ` Greg Bellows
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 21/32] target-arm: add SCTLR_EL3 and make SCTLR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 22/32] target-arm: make CSSELR banked Fabian Aggeler
2014-06-10 23:55 ` Fabian Aggeler [this message]
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 24/32] target-arm: add TCR_EL3 and make TTBCR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 25/32] target-arm: make c2_mask and c2_base_mask banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 26/32] target-arm: make DACR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 27/32] target-arm: make IFSR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 28/32] target-arm: make DFSR banked Fabian Aggeler
2014-06-13 22:06 ` Greg Bellows
2014-06-17 6:12 ` Edgar E. Iglesias
2014-06-23 16:53 ` Greg Bellows
2014-06-24 11:05 ` Aggeler Fabian
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 29/32] target-arm: make IFAR/DFAR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 30/32] target-arm: make PAR banked Fabian Aggeler
2014-06-13 22:49 ` Greg Bellows
2014-06-17 7:15 ` Aggeler Fabian
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 31/32] target-arm: make VBAR banked Fabian Aggeler
2014-06-13 22:43 ` Greg Bellows
2014-06-17 7:17 ` Aggeler Fabian
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 32/32] target-arm: make c13 cp regs banked (FCSEIDR, ...) Fabian Aggeler
2014-06-23 21:40 ` Greg Bellows
2014-06-24 11:08 ` Aggeler Fabian
2014-06-11 1:31 ` [Qemu-devel] [PATCH v3 00/32] target-arm: add Security Extensions for CPUs Edgar E. Iglesias
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402444514-19658-24-git-send-email-aggelerf@ethz.ch \
--to=aggelerf@ethz.ch \
--cc=christoffer.dall@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=greg.bellows@linaro.org \
--cc=peter.crosthwaite@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).