From: Fabian Aggeler <aggelerf@ethz.ch>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, peter.crosthwaite@xilinx.com,
greg.bellows@linaro.org, serge.fdrv@gmail.com,
edgar.iglesias@gmail.com, christoffer.dall@linaro.org
Subject: [Qemu-devel] [PATCH v3 27/32] target-arm: make IFSR banked
Date: Wed, 11 Jun 2014 01:55:09 +0200 [thread overview]
Message-ID: <1402444514-19658-28-git-send-email-aggelerf@ethz.ch> (raw)
In-Reply-To: <1402444514-19658-1-git-send-email-aggelerf@ethz.ch>
When EL3 is running in Aarch32 (or ARMv7 with Security Extensions)
IFSR has a secure and a non-secure instance.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
---
target-arm/cpu.h | 10 +++++++++-
target-arm/helper.c | 9 +++++----
2 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 3457a42..54c51a4 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -257,7 +257,15 @@ typedef struct CPUARMState {
uint32_t pmsav5_insn_ap; /* PMSAv5 MPU insn access permissions */
uint64_t hcr_el2; /* Hypervisor configuration register */
uint32_t scr_el3; /* Secure configuration register. */
- uint32_t ifsr_el2; /* Fault status registers. */
+ union { /* Fault status registers. */
+ struct {
+ uint32_t ifsr_ns;
+ uint32_t ifsr_s;
+ };
+ struct {
+ uint32_t ifsr32_el2;
+ };
+ };
uint64_t esr_el[4];
uint32_t c6_region[8]; /* MPU base/size registers. */
uint64_t far_el[4]; /* Fault address registers. */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index d50abc4..f51498a 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1495,8 +1495,9 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
.fieldoffset = offsetoflow32(CPUARMState, cp15.esr_el[1]),
.resetfn = arm_cp_reset_ignore, },
{ .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
- .access = PL1_RW,
- .fieldoffset = offsetof(CPUARMState, cp15.ifsr_el2), .resetvalue = 0, },
+ .access = PL1_RW, .resetvalue = 0,
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifsr_s),
+ offsetof(CPUARMState, cp15.ifsr_ns) } },
{ .name = "ESR_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0,
.access = PL1_RW,
@@ -3835,11 +3836,11 @@ void arm_cpu_do_interrupt(CPUState *cs)
env->exception.fsr = 2;
/* Fall through to prefetch abort. */
case EXCP_PREFETCH_ABORT:
- env->cp15.ifsr_el2 = env->exception.fsr;
+ A32_BANKED_CURRENT_REG_SET(env, ifsr, env->exception.fsr);
env->cp15.far_el[1] = deposit64(env->cp15.far_el[1], 32, 32,
env->exception.vaddress);
qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x IFAR 0x%x\n",
- env->cp15.ifsr_el2, (uint32_t)env->exception.vaddress);
+ env->exception.fsr, (uint32_t)env->exception.vaddress);
new_mode = ARM_CPU_MODE_ABT;
addr = 0x0c;
mask = CPSR_A | CPSR_I;
--
1.8.3.2
next prev parent reply other threads:[~2014-06-10 23:55 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-10 23:54 [Qemu-devel] [PATCH v3 00/32] target-arm: add Security Extensions for CPUs Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 01/32] target-arm: add cpu feature EL3 to CPUs with Security Extensions Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 02/32] target-arm: move Aarch32 SCR into security reglist Fabian Aggeler
2014-06-12 21:55 ` Greg Bellows
2014-06-17 7:22 ` Aggeler Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 03/32] target-arm: increase arrays of registers R13 & R14 Fabian Aggeler
2014-06-17 8:57 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 04/32] target-arm: add arm_is_secure() function Fabian Aggeler
2014-06-11 12:17 ` Sergey Fedorov
2014-06-12 16:26 ` Greg Bellows
2014-06-12 17:26 ` Sergey Fedorov
2014-06-12 18:35 ` Greg Bellows
2014-06-12 19:09 ` Sergey Fedorov
2014-06-17 5:51 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 05/32] target-arm: reject switching to monitor mode Fabian Aggeler
2014-06-12 21:55 ` Greg Bellows
2014-06-24 12:19 ` Aggeler Fabian
2014-06-24 13:43 ` Greg Bellows
2014-06-17 5:43 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 06/32] target-arm: make arm_current_pl() return PL3 Fabian Aggeler
2014-06-17 5:40 ` Edgar E. Iglesias
2014-06-17 7:12 ` Aggeler Fabian
2014-06-17 7:07 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 07/32] target-arm: add non-secure Translation Block flag Fabian Aggeler
2014-06-17 9:15 ` Edgar E. Iglesias
2014-06-17 10:07 ` Sergey Fedorov
2014-06-19 5:30 ` Edgar E. Iglesias
2014-06-25 4:15 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 08/32] target-arm: A32: Emulate the SMC instruction Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 09/32] target-arm: extend Aarch32 async excp masking Fabian Aggeler
2014-06-17 7:48 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 10/32] target-arm: extend Aarch64 SCR.{FIQ|IRQ} handling Fabian Aggeler
2014-06-12 21:55 ` Greg Bellows
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 11/32] target-arm: add async excp target_el&mode function Fabian Aggeler
2014-06-12 21:56 ` Greg Bellows
2014-06-17 7:29 ` Aggeler Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 12/32] target-arm: use dedicated target_el function Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 13/32] target-arm: implement IRQ/FIQ routing to Monitor mode Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 14/32] target-arm: Respect SCR.FW, SCR.AW and SCTLR.NMFI Fabian Aggeler
2014-06-12 22:43 ` Greg Bellows
2014-06-17 7:36 ` Aggeler Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 15/32] target-arm: add NSACR register Fabian Aggeler
2014-06-13 18:27 ` Greg Bellows
2014-06-17 7:41 ` Aggeler Fabian
2014-06-24 15:37 ` Greg Bellows
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 16/32] target-arm: add SDER definition Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 17/32] target-arm: add MVBAR support Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 18/32] target-arm: add macros to access banked registers Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 19/32] target-arm: insert Aarch32 cpregs twice into hashtable Fabian Aggeler
2014-06-12 19:49 ` Sergey Fedorov
2014-06-25 5:20 ` Edgar E. Iglesias
2014-06-25 13:50 ` Greg Bellows
2014-06-26 3:56 ` Edgar E. Iglesias
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 20/32] target-arm: arrayfying fieldoffset for banking Fabian Aggeler
2014-06-13 20:18 ` Greg Bellows
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 21/32] target-arm: add SCTLR_EL3 and make SCTLR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 22/32] target-arm: make CSSELR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 23/32] target-arm: add TTBR0_EL3 and make TTBR0/1 banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 24/32] target-arm: add TCR_EL3 and make TTBCR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 25/32] target-arm: make c2_mask and c2_base_mask banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 26/32] target-arm: make DACR banked Fabian Aggeler
2014-06-10 23:55 ` Fabian Aggeler [this message]
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 28/32] target-arm: make DFSR banked Fabian Aggeler
2014-06-13 22:06 ` Greg Bellows
2014-06-17 6:12 ` Edgar E. Iglesias
2014-06-23 16:53 ` Greg Bellows
2014-06-24 11:05 ` Aggeler Fabian
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 29/32] target-arm: make IFAR/DFAR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 30/32] target-arm: make PAR banked Fabian Aggeler
2014-06-13 22:49 ` Greg Bellows
2014-06-17 7:15 ` Aggeler Fabian
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 31/32] target-arm: make VBAR banked Fabian Aggeler
2014-06-13 22:43 ` Greg Bellows
2014-06-17 7:17 ` Aggeler Fabian
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 32/32] target-arm: make c13 cp regs banked (FCSEIDR, ...) Fabian Aggeler
2014-06-23 21:40 ` Greg Bellows
2014-06-24 11:08 ` Aggeler Fabian
2014-06-11 1:31 ` [Qemu-devel] [PATCH v3 00/32] target-arm: add Security Extensions for CPUs Edgar E. Iglesias
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402444514-19658-28-git-send-email-aggelerf@ethz.ch \
--to=aggelerf@ethz.ch \
--cc=christoffer.dall@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=greg.bellows@linaro.org \
--cc=peter.crosthwaite@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).