From: Fabian Aggeler <aggelerf@ethz.ch>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, peter.crosthwaite@xilinx.com,
greg.bellows@linaro.org, serge.fdrv@gmail.com,
edgar.iglesias@gmail.com, christoffer.dall@linaro.org
Subject: [Qemu-devel] [PATCH v3 29/32] target-arm: make IFAR/DFAR banked
Date: Wed, 11 Jun 2014 01:55:11 +0200 [thread overview]
Message-ID: <1402444514-19658-30-git-send-email-aggelerf@ethz.ch> (raw)
In-Reply-To: <1402444514-19658-1-git-send-email-aggelerf@ethz.ch>
When EL3 is running in Aarch32 (or ARMv7 with Security Extensions)
IFAR and DFAR have a secure and a non-secure instance.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Conflicts:
target-arm/helper.c
---
target-arm/cpu.c | 2 +-
target-arm/cpu.h | 21 ++++++++++++++++++++-
target-arm/helper-a64.c | 14 ++++++++++++--
target-arm/helper.c | 25 ++++++++++++++-----------
4 files changed, 47 insertions(+), 15 deletions(-)
diff --git a/target-arm/cpu.c b/target-arm/cpu.c
index f469715..6be35ed 100644
--- a/target-arm/cpu.c
+++ b/target-arm/cpu.c
@@ -463,7 +463,7 @@ static void arm1026_initfn(Object *obj)
ARMCPRegInfo ifar = {
.name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1,
.access = PL1_RW,
- .fieldoffset = offsetofhigh32(CPUARMState, cp15.far_el[1]),
+ .fieldoffset = offsetofhigh32(CPUARMState, cp15.ifar_ns),
.resetvalue = 0
};
define_one_arm_cp_reg(cpu, &ifar);
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 71782cf..7f5124c 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -279,7 +279,26 @@ typedef struct CPUARMState {
};
};
uint32_t c6_region[8]; /* MPU base/size registers. */
- uint64_t far_el[4]; /* Fault address registers. */
+ union { /* Fault address registers. */
+ struct {
+#ifdef HOST_WORDS_BIGENDIAN
+ uint32_t ifar_ns;
+ uint32_t dfar_ns;
+ uint32_t ifar_s;
+ uint32_t dfar_s;
+#else
+ uint32_t dfar_ns;
+ uint32_t ifar_ns;
+ uint32_t dfar_s;
+ uint32_t ifar_s;
+#endif
+ };
+ struct {
+ uint64_t far_el1;
+ uint64_t far_el2;
+ };
+ };
+ uint64_t far_el3;
uint64_t par_el1; /* Translation result. */
uint32_t c9_insn; /* Cache lockdown registers. */
uint32_t c9_data;
diff --git a/target-arm/helper-a64.c b/target-arm/helper-a64.c
index dbbf012..1fc0d3c 100644
--- a/target-arm/helper-a64.c
+++ b/target-arm/helper-a64.c
@@ -481,9 +481,19 @@ void aarch64_cpu_do_interrupt(CPUState *cs)
switch (cs->exception_index) {
case EXCP_PREFETCH_ABORT:
case EXCP_DATA_ABORT:
- env->cp15.far_el[new_el] = env->exception.vaddress;
+ switch (new_el) {
+ case 3:
+ env->cp15.far_el3 = env->exception.vaddress;
+ break;
+ case 2:
+ env->cp15.far_el2 = env->exception.vaddress;
+ break;
+ case 1:
+ env->cp15.far_el1 = env->exception.vaddress;
+ break;
+ }
qemu_log_mask(CPU_LOG_INT, "...with FAR 0x%" PRIx64 "\n",
- env->cp15.far_el[new_el]);
+ env->exception.vaddress);
case EXCP_BKPT:
case EXCP_UDEF:
case EXCP_SWI:
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 793985e..47bf7a7 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -536,7 +536,8 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
.access = PL0_W, .type = ARM_CP_NOP },
{ .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 2,
.access = PL1_RW,
- .fieldoffset = offsetofhigh32(CPUARMState, cp15.far_el[1]),
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s),
+ offsetof(CPUARMState, cp15.ifar_ns) },
.resetvalue = 0, },
/* Watchpoint Fault Address Register : should actually only be present
* for 1136, 1176, 11MPCore.
@@ -1523,11 +1524,15 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
.resetfn = arm_cp_reset_ignore, .raw_writefn = vmsa_ttbcr_raw_write,
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.ttbcr_s),
offsetoflow32(CPUARMState, cp15.ttbcr_ns) } },
- /* 64-bit FAR; this entry also gives us the AArch32 DFAR */
- { .name = "FAR_EL1", .state = ARM_CP_STATE_BOTH,
+ { .name = "DFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .resetvalue = 0,
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.dfar_s),
+ offsetof(CPUARMState, cp15.dfar_ns) } },
+ { .name = "FAR_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0,
- .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]),
- .resetvalue = 0, },
+ .access = PL1_RW, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.far_el1),
+ },
REGINFO_SENTINEL
};
@@ -2191,7 +2196,7 @@ static const ARMCPRegInfo v8_el2_cp_reginfo[] = {
.access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.esr_el2) },
{ .name = "FAR_EL2", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0,
- .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[2]) },
+ .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el2) },
{ .name = "SPSR_EL2", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 0,
@@ -2303,7 +2308,7 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
.access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.esr_el3) },
{ .name = "FAR_EL3", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 6, .crn = 6, .crm = 0, .opc2 = 0,
- .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[3]) },
+ .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el3) },
{ .name = "SPSR_EL3", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
.opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 0,
@@ -3838,8 +3843,7 @@ void arm_cpu_do_interrupt(CPUState *cs)
/* Fall through to prefetch abort. */
case EXCP_PREFETCH_ABORT:
A32_BANKED_CURRENT_REG_SET(env, ifsr, env->exception.fsr);
- env->cp15.far_el[1] = deposit64(env->cp15.far_el[1], 32, 32,
- env->exception.vaddress);
+ A32_BANKED_CURRENT_REG_SET(env, ifar, env->exception.vaddress);
qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x IFAR 0x%x\n",
env->exception.fsr, (uint32_t)env->exception.vaddress);
new_mode = ARM_CPU_MODE_ABT;
@@ -3849,8 +3853,7 @@ void arm_cpu_do_interrupt(CPUState *cs)
break;
case EXCP_DATA_ABORT:
A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr);
- env->cp15.far_el[1] = deposit64(env->cp15.far_el[1], 0, 32,
- env->exception.vaddress);
+ A32_BANKED_CURRENT_REG_SET(env, dfar, env->exception.vaddress);
qemu_log_mask(CPU_LOG_INT, "...with DFSR 0x%x DFAR 0x%x\n",
env->exception.fsr,
(uint32_t)env->exception.vaddress);
--
1.8.3.2
next prev parent reply other threads:[~2014-06-10 23:55 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-10 23:54 [Qemu-devel] [PATCH v3 00/32] target-arm: add Security Extensions for CPUs Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 01/32] target-arm: add cpu feature EL3 to CPUs with Security Extensions Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 02/32] target-arm: move Aarch32 SCR into security reglist Fabian Aggeler
2014-06-12 21:55 ` Greg Bellows
2014-06-17 7:22 ` Aggeler Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 03/32] target-arm: increase arrays of registers R13 & R14 Fabian Aggeler
2014-06-17 8:57 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 04/32] target-arm: add arm_is_secure() function Fabian Aggeler
2014-06-11 12:17 ` Sergey Fedorov
2014-06-12 16:26 ` Greg Bellows
2014-06-12 17:26 ` Sergey Fedorov
2014-06-12 18:35 ` Greg Bellows
2014-06-12 19:09 ` Sergey Fedorov
2014-06-17 5:51 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 05/32] target-arm: reject switching to monitor mode Fabian Aggeler
2014-06-12 21:55 ` Greg Bellows
2014-06-24 12:19 ` Aggeler Fabian
2014-06-24 13:43 ` Greg Bellows
2014-06-17 5:43 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 06/32] target-arm: make arm_current_pl() return PL3 Fabian Aggeler
2014-06-17 5:40 ` Edgar E. Iglesias
2014-06-17 7:12 ` Aggeler Fabian
2014-06-17 7:07 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 07/32] target-arm: add non-secure Translation Block flag Fabian Aggeler
2014-06-17 9:15 ` Edgar E. Iglesias
2014-06-17 10:07 ` Sergey Fedorov
2014-06-19 5:30 ` Edgar E. Iglesias
2014-06-25 4:15 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 08/32] target-arm: A32: Emulate the SMC instruction Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 09/32] target-arm: extend Aarch32 async excp masking Fabian Aggeler
2014-06-17 7:48 ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 10/32] target-arm: extend Aarch64 SCR.{FIQ|IRQ} handling Fabian Aggeler
2014-06-12 21:55 ` Greg Bellows
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 11/32] target-arm: add async excp target_el&mode function Fabian Aggeler
2014-06-12 21:56 ` Greg Bellows
2014-06-17 7:29 ` Aggeler Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 12/32] target-arm: use dedicated target_el function Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 13/32] target-arm: implement IRQ/FIQ routing to Monitor mode Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 14/32] target-arm: Respect SCR.FW, SCR.AW and SCTLR.NMFI Fabian Aggeler
2014-06-12 22:43 ` Greg Bellows
2014-06-17 7:36 ` Aggeler Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 15/32] target-arm: add NSACR register Fabian Aggeler
2014-06-13 18:27 ` Greg Bellows
2014-06-17 7:41 ` Aggeler Fabian
2014-06-24 15:37 ` Greg Bellows
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 16/32] target-arm: add SDER definition Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 17/32] target-arm: add MVBAR support Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 18/32] target-arm: add macros to access banked registers Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 19/32] target-arm: insert Aarch32 cpregs twice into hashtable Fabian Aggeler
2014-06-12 19:49 ` Sergey Fedorov
2014-06-25 5:20 ` Edgar E. Iglesias
2014-06-25 13:50 ` Greg Bellows
2014-06-26 3:56 ` Edgar E. Iglesias
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 20/32] target-arm: arrayfying fieldoffset for banking Fabian Aggeler
2014-06-13 20:18 ` Greg Bellows
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 21/32] target-arm: add SCTLR_EL3 and make SCTLR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 22/32] target-arm: make CSSELR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 23/32] target-arm: add TTBR0_EL3 and make TTBR0/1 banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 24/32] target-arm: add TCR_EL3 and make TTBCR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 25/32] target-arm: make c2_mask and c2_base_mask banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 26/32] target-arm: make DACR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 27/32] target-arm: make IFSR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 28/32] target-arm: make DFSR banked Fabian Aggeler
2014-06-13 22:06 ` Greg Bellows
2014-06-17 6:12 ` Edgar E. Iglesias
2014-06-23 16:53 ` Greg Bellows
2014-06-24 11:05 ` Aggeler Fabian
2014-06-10 23:55 ` Fabian Aggeler [this message]
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 30/32] target-arm: make PAR banked Fabian Aggeler
2014-06-13 22:49 ` Greg Bellows
2014-06-17 7:15 ` Aggeler Fabian
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 31/32] target-arm: make VBAR banked Fabian Aggeler
2014-06-13 22:43 ` Greg Bellows
2014-06-17 7:17 ` Aggeler Fabian
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 32/32] target-arm: make c13 cp regs banked (FCSEIDR, ...) Fabian Aggeler
2014-06-23 21:40 ` Greg Bellows
2014-06-24 11:08 ` Aggeler Fabian
2014-06-11 1:31 ` [Qemu-devel] [PATCH v3 00/32] target-arm: add Security Extensions for CPUs Edgar E. Iglesias
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402444514-19658-30-git-send-email-aggelerf@ethz.ch \
--to=aggelerf@ethz.ch \
--cc=christoffer.dall@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=greg.bellows@linaro.org \
--cc=peter.crosthwaite@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).