qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Fabian Aggeler <aggelerf@ethz.ch>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, peter.crosthwaite@xilinx.com,
	greg.bellows@linaro.org, serge.fdrv@gmail.com,
	edgar.iglesias@gmail.com, christoffer.dall@linaro.org
Subject: [Qemu-devel] [PATCH v3 30/32] target-arm: make PAR banked
Date: Wed, 11 Jun 2014 01:55:12 +0200	[thread overview]
Message-ID: <1402444514-19658-31-git-send-email-aggelerf@ethz.ch> (raw)
In-Reply-To: <1402444514-19658-1-git-send-email-aggelerf@ethz.ch>

When EL3 is running in Aarch32 (or ARMv7 with Security Extensions)
PAR has a secure and a non-secure instance.

Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
---
 target-arm/cpu.h    | 10 +++++++++-
 target-arm/helper.c | 25 ++++++++++++++-----------
 2 files changed, 23 insertions(+), 12 deletions(-)

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 7f5124c..048ede9 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -299,7 +299,15 @@ typedef struct CPUARMState {
             };
         };
         uint64_t far_el3;
-        uint64_t par_el1;  /* Translation result. */
+        struct { /* Translation result. */
+            union {
+                uint64_t par_ns;
+                uint64_t par_s;
+            };
+            union {
+                uint64_t par_el1;
+            };
+        };
         uint32_t c9_insn; /* Cache lockdown registers.  */
         uint32_t c9_data;
         uint32_t c9_pmcr; /* performance monitor control register */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 47bf7a7..c3195bd 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1281,7 +1281,7 @@ static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
              * fault.
              */
         }
-        env->cp15.par_el1 = par64;
+        A32_BANKED_CURRENT_REG_SET(env, par, par64);
     } else {
         /* ret is a DFSR/IFSR value for the short descriptor
          * translation table format (with WnR always clear).
@@ -1291,14 +1291,16 @@ static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
             /* We do not set any attribute bits in the PAR */
             if (page_size == (1 << 24)
                 && arm_feature(env, ARM_FEATURE_V7)) {
-                env->cp15.par_el1 = (phys_addr & 0xff000000) | 1 << 1;
+                A32_BANKED_CURRENT_REG_SET(env, par,
+                        (phys_addr & 0xff000000) | 1 << 1);
             } else {
-                env->cp15.par_el1 = phys_addr & 0xfffff000;
+                A32_BANKED_CURRENT_REG_SET(env, par, phys_addr & 0xfffff000);
             }
         } else {
-            env->cp15.par_el1 = ((ret & (1 << 10)) >> 5) |
-                ((ret & (1 << 12)) >> 6) |
-                ((ret & 0xf) << 1) | 1;
+            A32_BANKED_CURRENT_REG_SET(env, par,
+                    ((ret & (1 << 10)) >> 5) |
+                    ((ret & (1 << 12)) >> 6) |
+                    ((ret & 0xf) << 1) | 1);
         }
     }
 }
@@ -1306,9 +1308,9 @@ static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
 
 static const ARMCPRegInfo vapa_cp_reginfo[] = {
     { .name = "PAR", .cp = 15, .crn = 7, .crm = 4, .opc1 = 0, .opc2 = 0,
-      .access = PL1_RW, .resetvalue = 0,
-      .fieldoffset = offsetoflow32(CPUARMState, cp15.par_el1),
-      .writefn = par_write },
+      .access = PL1_RW, .resetvalue = 0, .writefn = par_write,
+      .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.par_s),
+                             offsetoflow32(CPUARMState, cp15.par_ns) } },
 #ifndef CONFIG_USER_ONLY
     { .name = "ATS", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = CP_ANY,
       .access = PL1_W, .accessfn = ats_access,
@@ -1755,8 +1757,9 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
     { .name = "DBGDSAR", .cp = 14, .crm = 2, .opc1 = 0,
       .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 },
     { .name = "PAR", .cp = 15, .crm = 7, .opc1 = 0,
-      .access = PL1_RW, .type = ARM_CP_64BIT,
-      .fieldoffset = offsetof(CPUARMState, cp15.par_el1), .resetvalue = 0 },
+      .access = PL1_RW, .type = ARM_CP_64BIT, .resetvalue = 0,
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.par_s),
+                             offsetof(CPUARMState, cp15.par_ns)} },
     { .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0,
       .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
       .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
-- 
1.8.3.2

  parent reply	other threads:[~2014-06-10 23:56 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-10 23:54 [Qemu-devel] [PATCH v3 00/32] target-arm: add Security Extensions for CPUs Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 01/32] target-arm: add cpu feature EL3 to CPUs with Security Extensions Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 02/32] target-arm: move Aarch32 SCR into security reglist Fabian Aggeler
2014-06-12 21:55   ` Greg Bellows
2014-06-17  7:22     ` Aggeler  Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 03/32] target-arm: increase arrays of registers R13 & R14 Fabian Aggeler
2014-06-17  8:57   ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 04/32] target-arm: add arm_is_secure() function Fabian Aggeler
2014-06-11 12:17   ` Sergey Fedorov
2014-06-12 16:26     ` Greg Bellows
2014-06-12 17:26       ` Sergey Fedorov
2014-06-12 18:35         ` Greg Bellows
2014-06-12 19:09           ` Sergey Fedorov
2014-06-17  5:51   ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 05/32] target-arm: reject switching to monitor mode Fabian Aggeler
2014-06-12 21:55   ` Greg Bellows
2014-06-24 12:19     ` Aggeler  Fabian
2014-06-24 13:43       ` Greg Bellows
2014-06-17  5:43   ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 06/32] target-arm: make arm_current_pl() return PL3 Fabian Aggeler
2014-06-17  5:40   ` Edgar E. Iglesias
2014-06-17  7:12     ` Aggeler  Fabian
2014-06-17  7:07       ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 07/32] target-arm: add non-secure Translation Block flag Fabian Aggeler
2014-06-17  9:15   ` Edgar E. Iglesias
2014-06-17 10:07     ` Sergey Fedorov
2014-06-19  5:30       ` Edgar E. Iglesias
2014-06-25  4:15   ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 08/32] target-arm: A32: Emulate the SMC instruction Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 09/32] target-arm: extend Aarch32 async excp masking Fabian Aggeler
2014-06-17  7:48   ` Edgar E. Iglesias
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 10/32] target-arm: extend Aarch64 SCR.{FIQ|IRQ} handling Fabian Aggeler
2014-06-12 21:55   ` Greg Bellows
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 11/32] target-arm: add async excp target_el&mode function Fabian Aggeler
2014-06-12 21:56   ` Greg Bellows
2014-06-17  7:29     ` Aggeler  Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 12/32] target-arm: use dedicated target_el function Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 13/32] target-arm: implement IRQ/FIQ routing to Monitor mode Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 14/32] target-arm: Respect SCR.FW, SCR.AW and SCTLR.NMFI Fabian Aggeler
2014-06-12 22:43   ` Greg Bellows
2014-06-17  7:36     ` Aggeler  Fabian
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 15/32] target-arm: add NSACR register Fabian Aggeler
2014-06-13 18:27   ` Greg Bellows
2014-06-17  7:41     ` Aggeler  Fabian
2014-06-24 15:37       ` Greg Bellows
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 16/32] target-arm: add SDER definition Fabian Aggeler
2014-06-10 23:54 ` [Qemu-devel] [PATCH v3 17/32] target-arm: add MVBAR support Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 18/32] target-arm: add macros to access banked registers Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 19/32] target-arm: insert Aarch32 cpregs twice into hashtable Fabian Aggeler
2014-06-12 19:49   ` Sergey Fedorov
2014-06-25  5:20   ` Edgar E. Iglesias
2014-06-25 13:50     ` Greg Bellows
2014-06-26  3:56       ` Edgar E. Iglesias
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 20/32] target-arm: arrayfying fieldoffset for banking Fabian Aggeler
2014-06-13 20:18   ` Greg Bellows
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 21/32] target-arm: add SCTLR_EL3 and make SCTLR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 22/32] target-arm: make CSSELR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 23/32] target-arm: add TTBR0_EL3 and make TTBR0/1 banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 24/32] target-arm: add TCR_EL3 and make TTBCR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 25/32] target-arm: make c2_mask and c2_base_mask banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 26/32] target-arm: make DACR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 27/32] target-arm: make IFSR banked Fabian Aggeler
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 28/32] target-arm: make DFSR banked Fabian Aggeler
2014-06-13 22:06   ` Greg Bellows
2014-06-17  6:12     ` Edgar E. Iglesias
2014-06-23 16:53       ` Greg Bellows
2014-06-24 11:05       ` Aggeler  Fabian
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 29/32] target-arm: make IFAR/DFAR banked Fabian Aggeler
2014-06-10 23:55 ` Fabian Aggeler [this message]
2014-06-13 22:49   ` [Qemu-devel] [PATCH v3 30/32] target-arm: make PAR banked Greg Bellows
2014-06-17  7:15     ` Aggeler  Fabian
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 31/32] target-arm: make VBAR banked Fabian Aggeler
2014-06-13 22:43   ` Greg Bellows
2014-06-17  7:17     ` Aggeler  Fabian
2014-06-10 23:55 ` [Qemu-devel] [PATCH v3 32/32] target-arm: make c13 cp regs banked (FCSEIDR, ...) Fabian Aggeler
2014-06-23 21:40   ` Greg Bellows
2014-06-24 11:08     ` Aggeler  Fabian
2014-06-11  1:31 ` [Qemu-devel] [PATCH v3 00/32] target-arm: add Security Extensions for CPUs Edgar E. Iglesias

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1402444514-19658-31-git-send-email-aggelerf@ethz.ch \
    --to=aggelerf@ethz.ch \
    --cc=christoffer.dall@linaro.org \
    --cc=edgar.iglesias@gmail.com \
    --cc=greg.bellows@linaro.org \
    --cc=peter.crosthwaite@xilinx.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=serge.fdrv@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).