From: Fam Zheng <famz@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PATCH v4 7/9] virtio-blk: Convert VirtIOBlockReq.out to structrue
Date: Wed, 11 Jun 2014 12:11:48 +0800 [thread overview]
Message-ID: <1402459910-18889-8-git-send-email-famz@redhat.com> (raw)
In-Reply-To: <1402459910-18889-1-git-send-email-famz@redhat.com>
The virtio code currently assumes that the outhdr is in its own iovec.
This is not guaranteed by the spec, so we should relax this assumption.
Convert the VirtIOBlockReq.out field to structrue so that we can use
iov_to_buf and then discard the header from the beginning of iovec.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/block/virtio-blk.c | 20 ++++++++++++++------
include/hw/virtio/virtio-blk.h | 2 +-
2 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 26285ff..09b6b60 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -12,6 +12,7 @@
*/
#include "qemu-common.h"
+#include "qemu/iov.h"
#include "qemu/error-report.h"
#include "trace.h"
#include "hw/block/block.h"
@@ -81,7 +82,7 @@ static void virtio_blk_rw_complete(void *opaque, int ret)
trace_virtio_blk_rw_complete(req, ret);
if (ret) {
- bool is_read = !(ldl_p(&req->out->type) & VIRTIO_BLK_T_OUT);
+ bool is_read = !(ldl_p(&req->out.type) & VIRTIO_BLK_T_OUT);
if (virtio_blk_handle_rw_error(req, -ret, is_read))
return;
}
@@ -287,7 +288,7 @@ static void virtio_blk_handle_write(VirtIOBlockReq *req, MultiReqBuffer *mrb)
BlockRequest *blkreq;
uint64_t sector;
- sector = ldq_p(&req->out->sector);
+ sector = ldq_p(&req->out.sector);
bdrv_acct_start(req->dev->bs, &req->acct, req->qiov.size, BDRV_ACCT_WRITE);
@@ -321,7 +322,7 @@ static void virtio_blk_handle_read(VirtIOBlockReq *req)
{
uint64_t sector;
- sector = ldq_p(&req->out->sector);
+ sector = ldq_p(&req->out.sector);
bdrv_acct_start(req->dev->bs, &req->acct, req->qiov.size, BDRV_ACCT_READ);
@@ -344,22 +345,29 @@ static void virtio_blk_handle_request(VirtIOBlockReq *req,
MultiReqBuffer *mrb)
{
uint32_t type;
+ struct iovec *iov = req->elem->out_sg;
+ unsigned out_num = req->elem->out_num;
if (req->elem->out_num < 1 || req->elem->in_num < 1) {
error_report("virtio-blk missing headers");
exit(1);
}
- if (req->elem->out_sg[0].iov_len < sizeof(*req->out) ||
+ if (req->elem->out_sg[0].iov_len < sizeof(req->out) ||
req->elem->in_sg[req->elem->in_num - 1].iov_len < sizeof(*req->in)) {
error_report("virtio-blk header not in correct element");
exit(1);
}
- req->out = (void *)req->elem->out_sg[0].iov_base;
+ if (unlikely(iov_to_buf(iov, out_num, 0, &req->out,
+ sizeof(req->out)) != sizeof(req->out))) {
+ error_report("virtio-blk request outhdr too short");
+ exit(1);
+ }
+ iov_discard_front(&iov, &out_num, sizeof(req->out));
req->in = (void *)req->elem->in_sg[req->elem->in_num - 1].iov_base;
- type = ldl_p(&req->out->type);
+ type = ldl_p(&req->out.type);
if (type & VIRTIO_BLK_T_FLUSH) {
virtio_blk_handle_flush(req, mrb);
diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index b495e42..2571e96 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -138,7 +138,7 @@ typedef struct VirtIOBlockReq {
VirtIOBlock *dev;
VirtQueueElement *elem;
struct virtio_blk_inhdr *in;
- struct virtio_blk_outhdr *out;
+ struct virtio_blk_outhdr out;
QEMUIOVector qiov;
struct VirtIOBlockReq *next;
BlockAcctCookie acct;
--
2.0.0
next prev parent reply other threads:[~2014-06-11 4:12 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-11 4:11 [Qemu-devel] [PATCH v4 0/9] virtio-blk: Converge VirtIOBlockRequest into VirtIOBlockReq Fam Zheng
2014-06-11 4:11 ` [Qemu-devel] [PATCH v4 1/9] virtio-blk: Move VirtIOBlockReq to header Fam Zheng
2014-06-11 4:11 ` [Qemu-devel] [PATCH v4 2/9] virtio-blk: Convert VirtIOBlockReq.elem to pointer Fam Zheng
2014-06-11 4:11 ` [Qemu-devel] [PATCH v4 3/9] virtio-blk: Drop bounce buffer from dataplane code Fam Zheng
2014-06-11 4:11 ` [Qemu-devel] [PATCH v4 4/9] virtio-blk: Drop VirtIOBlockRequest.read Fam Zheng
2014-06-11 4:11 ` [Qemu-devel] [PATCH v4 5/9] virtio-blk: Replace VirtIOBlockRequest with VirtIOBlockReq Fam Zheng
2014-06-11 4:11 ` [Qemu-devel] [PATCH v4 6/9] virtio-blk: Use VirtIOBlockReq.in to drop VirtIOBlockReq.inhdr Fam Zheng
2014-06-11 4:11 ` Fam Zheng [this message]
2014-06-11 4:11 ` [Qemu-devel] [PATCH v4 8/9] virtio-blk: Fill in VirtIOBlockReq.out in dataplane code Fam Zheng
2014-06-11 4:11 ` [Qemu-devel] [PATCH v4 9/9] virtio-blk: Fix and clean up the in_sg and out_sg check Fam Zheng
2014-06-27 13:29 ` [Qemu-devel] [PATCH v4 0/9] virtio-blk: Converge VirtIOBlockRequest into VirtIOBlockReq Stefan Hajnoczi
2014-06-27 16:19 ` Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402459910-18889-8-git-send-email-famz@redhat.com \
--to=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).